I just want to make the point here, for others who are reading comments, and maybe you have yourself an ultra. You know it's going to be hard to get another one. You can direct solder the connector from the Ultra to the pads on the Reaper. I find it makes things easier to know you have the pin out correct. Just a little tip I will leave here.
I really love your style and i love your video! Really so fun 🎉❤ if i go to America for FPV trip, i really wanna meet you. I am really big fan of you!!!
Did you smoke a fatty before the antenna mounting? I’ll refer to it as the “Ziptie incident” from now on. Or you were very mentally involved in the ziptie…ing 😂🤣 itself? Hahahaha that was great
Greetings from Bali. Could you build (as it will be a tutorial to me) a 10 inch or 12 inch cinelifter drone? Maybe it is good to have 4 arms with 2 motors om each arm. I am not challenging you or anyone here but I am asking your kindness and your valuable time and money to try to build it. If you say OK to that, then it shall be lifting 12 lbs (5+ kgs) for an ARRI cam or similar WITHOUT stabilizer gimbal but still has to get a good set of Vibration Absorber on a base plate. Base plate could be madr from carbon composite too for less-weight reason. Thanks for your time to read it Sir, amd I love most of your videos. Keep it up Sir. Regards, = Raymond = (Bali Drone Services)
@DrainMan FPV - Very nice broski !!! 🔥STRAIGHT FIRE MANN🔥Thinking bout grabbin Bots new frame the DEMIBOT. BEAST MODE (🔎watch that microscopic solder blob that was hiding on the mosfet of you 1st motor🔎 those lil bastards will get u from time to time... 🔥)
Um, Drainman, Actually, i want you to review my drone frame which i designed. My frame is good for freestyle. So if you wanna teview my frame, then i will send my frame to you. Please tell me on my email or reply. I will waiting your answer, Bro.🙏🏻
Heck yeah man!!! Thanks so much for the support, hope you enjoy flying that quad as much as I do!
Also worth noting brain3d does have an optional walksnail dual antenna mount :)
You both are huge inspirations
@@captainvanover how about o3 mounts for antenna and which one to use for durability (original or dual aftermarket?)
Awesome video! Thanks for the support as well!
That will become a collectable
Sickest quad EVER!!! Thanks brother!
My day just got better. Drainman video just makes my day happier. Sick build.
Heeeeeeeeeeyyyyy DrainMan !!!!!
Always entertaining. 👏👏👏
Helll yeahhhhhhh. So psyched whenever a new Drainman video drops! Freaking send that Ultra like no tomorrow!
ahhh second!! dam i love vanover! love drizzy drain man ahhh this is amazing!! i want one
I just want to make the point here, for others who are reading comments, and maybe you have yourself an ultra. You know it's going to be hard to get another one. You can direct solder the connector from the Ultra to the pads on the Reaper.
I find it makes things easier to know you have the pin out correct. Just a little tip I will leave here.
I really love your style and i love your video! Really so fun 🎉❤ if i go to America for FPV trip, i really wanna meet you. I am really big fan of you!!!
Small tip for you mate, mark ESC side of the connectors with black marker. They are NOT REVERSABLE!
Also u could use serial connector to get data/and power to HD. No soldering ;) Same can be done with receiver. All in all 0 soldering on HD :)
nice build im considering it and i dig the outro lol
Awesome Brah!🤘🏻🤘🏻😂love the ending
Love the love ❤ been looking forward to more reviews of this, top job ✌
Great video thank u .
Glad to see you got an Ultra brother. Fly it for a while.....
Always loved the drainman video ! ✌️🚀🛸
SAVAGE 🏌️♂️
One day I'll get an ultra, one day...
That's a clean build! I like your videos, always instructive and fun 🤙. I just started building a vanny too
Nice ! Where did you buy this tape ? Thanks !
Do a demibot build plz, botgrinders frame
I've been using the Vanover 514.5-3 props lately. I was on Gemfan 51433 forever but I really like these Azure Power Vanover props.
The Azure Vanny props are amazing!
Me Man 👍😉
Enjoyed the build video. Any issues heat/performance with placing the RX on top of the Avatar VTX? Imagining the VTX gets quite hot...
bro,, could you share the .stl walksnail antenna for apex standard frame? I see your mount on vannystyle frame is nice, thanks
So drainman, what can u say about ultra? ;)
At the end of the video Drianman says it's a match made in heaven. From the Frame to ESC to FC. I say its the sickest quad ever!
@@baggszilla Glad he liked it!!!!
I never want to fly a different FC ever again 😂amazing work Commander!
@@DrainManFPV Ultra v2 is coming :)
Did you smoke a fatty before the antenna mounting? I’ll refer to it as the “Ziptie incident” from now on.
Or you were very mentally involved in the ziptie…ing 😂🤣 itself? Hahahaha that was great
Greetings from Bali.
Could you build (as it will be a tutorial to me) a 10 inch or 12 inch cinelifter drone? Maybe it is good to have 4 arms with 2 motors om each arm. I am not challenging you or anyone here but I am asking your kindness and your valuable time and money to try to build it. If you say OK to that, then it shall be lifting 12 lbs (5+ kgs) for an ARRI cam or similar WITHOUT stabilizer gimbal but still has to get a good set of Vibration Absorber on a base plate. Base plate could be madr from carbon composite too for less-weight reason.
Thanks for your time to read it Sir, amd I love most of your videos. Keep it up Sir.
Regards,
= Raymond =
(Bali Drone Services)
Till FC have Avatar connectors like DJI I am not changing to AVatar.
@DrainMan FPV - Very nice broski !!! 🔥STRAIGHT FIRE MANN🔥Thinking bout grabbin Bots new frame the DEMIBOT. BEAST MODE (🔎watch that microscopic solder blob that was hiding on the mosfet of you 1st motor🔎 those lil bastards will get u from time to time... 🔥)
8 months in and still searching for an ultra to buy. I might spot Bigfoot before then.
🤣
It makes me sick how easy the soldering looks for you and maybe someday I will get better at it and be able to do it in one try.
Yo I have a beautiful stl file for the dual antennas if you need it
First
Is this guy just ghetto-Bardwell or….
should be titled, How to burn an ultra
You i 🏳️🌈🏳️🌈🏳️🌈🏳️🌈
Um, Drainman, Actually, i want you to review my drone frame which i designed. My frame is good for freestyle. So if you wanna teview my frame, then i will send my frame to you. Please tell me on my email or reply. I will waiting your answer, Bro.🙏🏻