How To Make a Hand Filing Jig | Level 01 Knife Making
HTML-код
- Опубликовано: 1 июн 2024
- Making a filing jig for knife blades.
Simple, versatile, low cost and easy to make, this version should allow me to:
Create accurate bevels, choose bevel angle and perfect plunge lines.
This is part 2 of the Level 01 Knife Making Series,
Check out part 1: How to Make a Mini Forge From a Baby Formula Can
• How to Make a Mini For...
Tools:
- Wood Saw
- Hacksaw
- Double cut File 250mm / 10 Inch
- Power Drill / Hand Drill
- Screwdriver
- 4/19 mm Drill bits
- Hammer + Center Punch
- Small Wrench
- Sanding Paper (80 grit)
- Pen Reamer *optional
- Clamps
Materials:
- Wood Stock 65/65/400mm (2.5/2.5/16 Inch)
- Wood Stock 65/65/70mm (2.5/2.5/3 Inch)
- Wood Stock /plywood 90/300/15mm (3.5/12/0.75 inch)
- Swivel Caster Wheel Base 75mm (2.75 inch)
- Ikea Curtain rod (RÄCKA) or any two tubes that slide well as a telescope
* 3 times your file length (inner) 120mm (5 inch) outer
- 2 X 50mm M6 bolts and 20mm nylon sleeves
- 2 X 2/40/120mm Metal (steel or Aluminium) flat stock
- 2 X 18-38mm (7/8 - 1 1/2 inch) Adjustable Steel Clamp
- Various bolts and screws
Let me know what you think in the comments.
Offer Canfi (Taubenfligel) - Хобби
7:35 well ssshhhiiittt!!! LOL!!!🤣
True story 🤪
Can't wait to turn my Brazilian Nicholson into this.
Golden hands making iron knife. Love it.
Thank you!!!
This is a nice design. Only thing I think I might change is using some t- track on the side to hold your angle block. You could still mark locations for specific degrees, but that would make it infinitely variable. That way, you could not only use your standard presets, but work on any piece you might be asked to help with. Just a thought.
Thank you sir! Adding some tracks and creating specific angles and locations is a great idea. I will definitely add some thing of the sort in the next iteration.
I do use this for various blades and thickness so it definitely needs to stay very versatile.
oh so that's how you do it! :)
Thank you so much!!!
מקצוען אמיתי..וואוו
שאפו גדול מלך🤙🤙
תודה רבה!!!
Dope stuff my man, have a like and sub.
Thanks mate! Will keep them coming.
شكرا
من دواعي سروري
How thin you file the edge before ht??
Is it possible to file a thin edge after ht??
//firefighter from sweden
Hi there! I try to get the main bevel to 0.7 - 0.8 mm. I do the secondary bevel after heat treatment.
It’s possible to get it thinner then that if you use a second file, less aggressive than the one in the video.
It’s very possible to work after heat treatment; but not with files!! It will ruin them very quickly.
Check out my axe restoration video, I do a similar job with sand paper on a long flat piece of plywood.
You can definitely do that if you don’t have access to a belt grinder.
Cheers
could you share the dimensions of the file ramp, please
Hi, if I understand you correctly then the dimensions change for different angels. I move the pivot back and forth, back to get a lower angle and forward to get a steeper angle.
Also I change the block that holds the blade if I need a much lower angle I put a thicker block.
could you share the measurements please
@@ylmazoytan8334 the measurements are in the video description :)
Can you share the dimensions of the product?
Hi buddy, the full bill of materials is in the video description 🤙