How to Fully Disassemble the iRobot Roomba i-Series models
HTML-код
- Опубликовано: 16 окт 2024
- The full version of the video on how to disassemble, take apart the whole Roomba to get to Cliff sensors and Bumper sensors as well as the optical sensor
www.ebay.com/s...
I sprayed mine with a hose after it ran over and spread poop everywhere. I dried it and then blew it dry with the air compressor. After this I let it sit and dry for 48 hours. Next I placed it on the charging station. It is an i6. The clean ring is circling as though it is changing. The base light is red and remains red.
The rumba hasn’t performed it’s daily run in two days.
Any suggestions???
Thanks in advance.
I’m really struggling to get the front bumper back on with full functionality… I can get it back on but it doesn’t have that “springy” feeling. When I push the bumper in it kind of just sits there, I have to manually pull it back out.
Any chance you got a verro or Mirra? They are aquabots so you can probably use aquabot parts.
Looking for help. Have an i7+. Replaced the cliff sensors. Reset Roomba and startes vacuum cycle but it stops after about 2 minutes and needs to dock. Can't find sick and eventually button goes red and says docking issues. Does this even after hard reset again. Any thoughts?
Are their any videos of the original roomba series? I have two and like to do a teardown! Use the parts for one to the other! Thanks Mark
Not of the Original Roomba, and at the moment I do see anyone selling one around my area, did you want to send me yours for a tear down video?
@@TheiRobotChannel How much would you charge?
@@ThePalmermark If you send me a complete Roomba with out missing parts (helps with video), I'll do a tear down video, only cost is to ship the Roomba back to you.
@@TheiRobotChannel I'm not sure but is this a private text?
No its not, google has removed the private messager from the youtube account, due to lack of popularity, so I will add one of my ebay links in the description and you can contact me thru there
Any chance you've worked with the s9 series yet?
So far the only error stumping me is error 9 bumper error.
It's unique to the rest with the use of the HECB and magnets. I don't know how to test HECBs yet and can't tell where the disconnect or communication error is coming from. Seen it on 4 of them new out of the box and I had a feeling it was due to the return springs since they ship the robots vertical facing down compressing the bumper constantly. But so far resetting springs, disassembling and reassembling the bumper hasn't worked. Wires are so small I'm worried I'll break one messing with them too much lol.
My i4 won't charge or turn on. I purchased 2 new batteries with no luck. Any suggestions?
it might be your contacts--mine wore down to nothing and wernen't charging anymore. I purchased replacement charging contacts and replaced. It's a MAJOR repair. There's an alternative replacement contact that's similar to a magnetic sticker--this might be an easier solution, they're available on E-bay.
Whether
Roomba Warfare is your channel? if so please tell me if Roomba 760 survived the fall
Hi, yes that is one of my older channels and ya 760 survived and restored to original and sold to a happy customer
@@TheiRobotChannel haha nice
@@TheiRobotChannel show your roomba scooba collection
thanks somuch
🤖
We just got our first puppy a Pembroke Welsh Corgi and we love him so much, but today our Roomba Rosie gobbled up and spread puppy 💩 all over the carpet and hard wood floors while I was at work today. The only thing that stopped it was the sensors were completely covered in and caked in that’s right poo poo everywhere and it’s all inside every nook and cranny of my roomba i3.
Surely Im not the only robot owner this has happened🥲😬😬😬
Yes, you are not the only one, has happen more times to people than you think, few years back I did receive a Roomba that went thru same senerio, I took it all apart, cleaned and disinfected all parts, and it worked and looked like a new Roomba afterwards.
@@TheiRobotChannel Thank you for your encouraging reply. I hope my Rosie will respond similarly after I put her back together and exchange the rollers and filter🤞
I sprayed mine with a hose after it ran over and spread poop everywhere. I dried it and then blew it dry with the air compressor. After this I let it sit and dry for 48 hours. Next I placed it on the charging station. It is an i6. The clean ring is circling as though it is changing. The base light is red and remains red.
Any suggestions???
Thanks in advance.
@@CarlAlvey great idea and life hack, definitely using ur way next time