Sir, motor test karne ke liye. Is meter is 1st probe aap earthing per connect kar and 2nd probe aap live wire ya neutral per check karo aapko insulation pata lag jayegi
Sir domestic wiring ki IR testing karte samay agar ham 250 volt par set kar kar test kar sakte hai without removing installed appliances aur aap koi achha Ir tester suggest kar dijiye please.
Sir, Aap insulation check kar sakte hai. But domestic wiring live nahi honi chahiye. Appliances installed ho tab bhi check kar sakte hain. But appliances off hone chahiye
Hi Thanks for sharing the details. Also from where can we buy the mega ohm box for checking the accuracy. Sigma website do not have such instrument ( mega ohm box) in their product list.
Sir, here is the details below where you can buy directly from sigma people Sunil Associates, Ashoka Palace, Patel Road, 23, West Patel Nagar, Opp. Metro Piller No. 211, New Delhi - 110008, (India) Phone -(M) 9312531313, (91)(11) 47005692, 25882168,25884181
Sir, Bohot acha question kiya hain apne. Jab aap Instrument mein L & E ko short karte hain to vo dead short hota hai. But jab aap motor per connect karte hain aur motor short hain to kuch resistance uske beech mein hoga in Kilo Ohms so vo dead short nahi hua hain. Isliye aapko dead short nahi karna hain
Sir, For Testing of insulation with digital insulation tester: 1. For Single core cable: Put the sample or cable drum inside the plastic bucket. Bucket should be put on to rubber sheet or wooden plank. If we have put the sample on to water bath, water bath should be put on to rubber sheet and its mains socket plug should be out and not connected. Then sample both the ends should be out and not connected to the water. Connect this insulation tester one point in the water and another point on to the wire. If the sample is faulty or leaky it will show some reading OR Err. If the sample is good and the values are inside 40 GOhm it will show value, if the sample is more than 40GOhm it will show OL. 2. For Pair Cable: Connect this insulation tester on both the points of cable. Do remember both the end of the wire should be open and not short. If the sample is faulty or leaky it will show some reading OR Err. If the sample is good and the values are inside 40 GOhm it will show value, if the sample is more than 40GOhm it will show OL.
Sir video bahut accha hai ❤ motor me kese test kare
Sir, motor test karne ke liye. Is meter is 1st probe aap earthing per connect kar and 2nd probe aap live wire ya neutral per check karo aapko insulation pata lag jayegi
Sir bhut acha vedio
Ase vedio late rahiye
Thankyou
Thanks
very well explained....
Good
Sir domestic wiring ki IR testing karte samay agar ham 250 volt par set kar kar test kar sakte hai without removing installed appliances aur aap koi achha Ir tester suggest kar dijiye please.
Sir, Aap insulation check kar sakte hai. But domestic wiring live nahi honi chahiye. Appliances installed ho tab bhi check kar sakte hain. But appliances off hone chahiye
Hello sir iska tutorial ,3 ph motor pe dikhiye insultion resistance kaise check kre
Sir, Procedure same hain. Aapko pehle Phase and Earth point per insulation check karna hain. Phir Neutral & Earth Point per Insulation check karna hai
Sir meggar me upar lead lagane vale jo 2 point ka use nhi btaya jo middle me hai
Sir, jo beech ke 2 points hain. Vo instrument ki upar DMM vale range ke liye hain. Means Volt, Frequency, Current
Hi
Thanks for sharing the details.
Also from where can we buy the mega ohm box for checking the accuracy.
Sigma website do not have such instrument ( mega ohm box) in their product list.
Sir, here is the details below where you can buy directly from sigma people
Sunil Associates,
Ashoka Palace, Patel Road,
23, West Patel Nagar,
Opp. Metro Piller No. 211,
New Delhi - 110008, (India)
Phone -(M) 9312531313,
(91)(11) 47005692, 25882168,25884181
These are actually Chinese product , none of the Indian company make it.
Thanks sir
Can it bye in online or only in of market
What would be the minimum admissible mega ohm of an installation having total load of 200 hp
Sir, if your sample result is more than 1000M Ohm then your sample is pass otherwise its fail
Sir insulation tester matlab ek tarah mega ohm hi hota he kya? Plz Replay
Yes, Insulation Or Megohm or Megger sab ek he cheez hoti hain
On meter reading came Err and voltage 9 display of Alternator when measuring insulation resistance
Err means the sample is short, or having low insulation value
Can we test Earth resistance with this device?
No sir this is insulation tester for Earth Testing you have to purchase Earth Resistance Tester
Sir app kahete ho ki L aur E ko short Nahi Karna hai par koi motor body short hota to L aur E short hi hota na
Sir, Bohot acha question kiya hain apne.
Jab aap Instrument mein L & E ko short karte hain to vo dead short hota hai.
But jab aap motor per connect karte hain aur motor short hain to kuch resistance uske beech mein hoga in Kilo Ohms so vo dead short nahi hua hain.
Isliye aapko dead short nahi karna hain
Very well explain 🙏
cable ka insulation test kaisa hota hai
Sir, For Testing of insulation with digital insulation tester:
1. For Single core cable: Put the sample or cable drum inside the plastic bucket. Bucket should be put on to rubber sheet or wooden plank. If we have put the sample on to water bath, water bath should be put on to rubber sheet and its mains socket plug should be out and not connected. Then sample both the ends should be out and not connected to the water. Connect this insulation tester one point in the water and another point on to the wire. If the sample is faulty or leaky it will show some reading OR Err. If the sample is good and the values are inside 40 GOhm it will show value, if the sample is more than 40GOhm it will show OL.
2. For Pair Cable: Connect this insulation tester on both the points of cable. Do remember both the end of the wire should be open and not short. If the sample is faulty or leaky it will show some reading OR Err. If the sample is good and the values are inside 40 GOhm it will show value, if the sample is more than 40GOhm it will show OL.
3phase moter checking video
Sir Price please?
Sir, Price will around Rs.3500/- to Rs.4500/-. You can buy anywhere online or offline. You can call to there office and buy it from there.
Price nahi batyee Aap ne
Purchase to insulation tester
Sir aapki email ID ya telegram channel mil jayega plz
Sir main free lance kaam kar raha hun. Yahi Mera channel hai