Gotta love these videos. At 3:07 cut frame to that last panel magically being in place. RUclips makes it look so easy. It's actually incredible difficult if you want to do it right you have to remove the A-pillar, which also involves loosening the C-pillar, and if you don't want to totally wreck the cloth liner it's an extremely delicate process.
Thank you. I bought a used 2013 two days ago. The only service that had been done to it ever that was not at Audi was a the hood release lever. On the two hour drive back home with the car something dropped and hit my foot. Yesterday I figured out it was that lever. After watching the video I popped it back into place. I guess the local garage guy put it in, but didn't pop it in. I had not even looked at it... Just came straight to youtube to see the possible issues to check and yours was the first video I looked at. It took me longer to walk to the car than to fix it.
You are the best!!! Thank you soo much for your videos. I have bought TT 2 months ago and because of you, I have saved a lot of money. I had broken paddleshifters, didn't know how to turn on daytime running lights, my glovebox was broken, and my release lever is broken too. I have fixed everything after watching your videos. Legend!! Btw, I'm from Croatia..Lijep pozdrav :D One more thing..If you could show how to paint or fix those 3 climate control wheels(for fan speed, temp., and zones), because mine's are damaged..the color is missing and they are pretty much white :/
Thank you for this video! It helped me to change my broken bonnet release handle. Very useful to know where the panel clips are located for me to pry them out. For my Audi TT MK2 Singapore
Man I can't believe you gotta do all that just to open the frickin bonnet. I've got this car and when I tried opening the bonnet the stupid black handle snapped and broke didn't even pull it that hard. Anyways thx for the tutorial.
Just want to say thank you, you’re awesome man 🤙🏻 garages would have ripped me off for such a little job haha. - for anyone who is in two minds of doing it I have no idea about cars and I have never touched one in my life but this was easy! Hardest part is putting everything back on 😂 cheers again bro 😎
Very good instructional video… none of the usual five minutes of preamble of someone trying to stretch out the video length by explaining what a car is. 🤨
No need to take ANY trim off at all. Use needle nose pliers to remove snapped shaft from the latch hole inwards to the footwell. Push new spindle in. Job done! Less than 1 minute!
If your handle breaks, buy the aluminum upgrade. BTW the Audi handle removal procedure is less forceful. 1. Disconnect the cable at the separation joint under the hood 2. Raise the release handle 90 degrees and slide out. This moves the retention tab out of the way as opposed to forcing it past with a pry bar.
Pozdrav, danas sam povukao rucicu za podignuti haubu i samo sam osjetio da se nesto desilo...da li je pukla sajla ili se otkacila? Imam audi a3 2011...da li je ista procedura kao TT...hvala
Hey, sorry for the off-topic, but I wanted to ask you if your TT also takes long to warm up these days? I think mine has a thermostat stuck-open since it takes ca 25 min to get to 90. Thanks!
It takes around 20 minutes when its pretty cold. Typically if thermostat is stuck, it does not reach 90 deg, ever. But can be that your thermostat will die soon.
dr. sunka thank you so much for answer! When I drive in city it does get to 90, after a long time. When im on the autobahn, it never gets there, and it seemed a bit strange...
Hi! I own a Q7 4L. I changed the stupid releas sistem 3 times already and today broke again. Is breaking exactly where the small ball on the end of the wire hold up. Is made out of cheap plastic with a poor design. Any hack for this? Or a place where can i buy a better one. One made out of metal maby
How about its not a problem of the plastic handle, but instead the wire is very hard to pull? Hence, the handle breaks over certain force. Take a look at the wire if it is bent somewhere or stuck, or something, maybe even oil it a bit.
Gotta love these videos. At 3:07 cut frame to that last panel magically being in place. RUclips makes it look so easy. It's actually incredible difficult if you want to do it right you have to remove the A-pillar, which also involves loosening the C-pillar, and if you don't want to totally wreck the cloth liner it's an extremely delicate process.
Mine just broke now. Now I know how to fix this.
Thank you so much!!!!
Thank you. I bought a used 2013 two days ago. The only service that had been done to it ever that was not at Audi was a the hood release lever.
On the two hour drive back home with the car something dropped and hit my foot.
Yesterday I figured out it was that lever.
After watching the video I popped it back into place.
I guess the local garage guy put it in, but didn't pop it in.
I had not even looked at it... Just came straight to youtube to see the possible issues to check and yours was the first video I looked at.
It took me longer to walk to the car than to fix it.
Thank you for posting this! So very helpful. Will save my car a tow as the battery was dead!
You are the best!!! Thank you soo much for your videos. I have bought TT 2 months ago and because of you, I have saved a lot of money. I had broken paddleshifters, didn't know how to turn on daytime running lights, my glovebox was broken, and my release lever is broken too. I have fixed everything after watching your videos. Legend!! Btw, I'm from Croatia..Lijep pozdrav :D
One more thing..If you could show how to paint or fix those 3 climate control wheels(for fan speed, temp., and zones), because mine's are damaged..the color is missing and they are pretty much white :/
You are amazing, thank you so much, tried to get into this for ages but never managed to. Fantastic video, love your work!!
Thank you for this video! It helped me to change my broken bonnet release handle. Very useful to know where the panel clips are located for me to pry them out. For my Audi TT MK2
Singapore
Man I can't believe you gotta do all that just to open the frickin bonnet. I've got this car and when I tried opening the bonnet the stupid black handle snapped and broke didn't even pull it that hard. Anyways thx for the tutorial.
Bro milion times thanks.
I have just broke the latch today cause i was not carefull enough.
❤❤❤
awesome, it’s simple, then again, if you don’t know how to, it seems complicated. Thx for the video!
Very useful and simple to follow.👌 Thank you
THANK YOU FOR SHARING YOUR KNOWLEDGE!!!😀
Thanks for this vid mate🎉
Helped me out no end
Great stuff! Nice and simple for my simple mind to understand
Just want to say thank you, you’re awesome man 🤙🏻 garages would have ripped me off for such a little job haha. - for anyone who is in two minds of doing it I have no idea about cars and I have never touched one in my life but this was easy! Hardest part is putting everything back on 😂 cheers again bro 😎
Thanks, reassembly is always the hardest part. (:
Very good instructional video… none of the usual five minutes of preamble of someone trying to stretch out the video length by explaining what a car is. 🤨
Thank you my friend you help me a lot with this video
Thank you my friend very well put together
Amazing! Worked quick. Thanks!
Exactly what I needed. Thanks.
You my friend are a lifesaver!
Thanks so much for this!!
No need to take ANY trim off at all. Use needle nose pliers to remove snapped shaft from the latch hole inwards to the footwell. Push new spindle in. Job done! Less than 1 minute!
The video is how to open the bonnet without a bonnet release handle. So yeah, you need to take the trims off
Thanks man you helped me a lot
Very helpful thank you
If your handle breaks, buy the aluminum upgrade.
BTW the Audi handle removal procedure is less forceful.
1. Disconnect the cable at the separation joint under the hood
2. Raise the release handle 90 degrees and slide out. This moves the retention tab out of the way as opposed to forcing it past with a pry bar.
Thanks from France 😉
Great vid! Thanks a lot just what I was looking for 😎
Thanks dude .. good video …
Thanks bro you saved me ass!! I imagine that it’s the same for a4, looks the same. What year is the tt btw?
Good video!
Pozdrav, danas sam povukao rucicu za podignuti haubu i samo sam osjetio da se nesto desilo...da li je pukla sajla ili se otkacila? Imam audi a3 2011...da li je ista procedura kao TT...hvala
Yo thanks for te upload, very helpful 👍
thank you bro, you save me
Many thanks for the video 😍
Hey, sorry for the off-topic, but I wanted to ask you if your TT also takes long to warm up these days? I think mine has a thermostat stuck-open since it takes ca 25 min to get to 90.
Thanks!
It takes around 20 minutes when its pretty cold. Typically if thermostat is stuck, it does not reach 90 deg, ever. But can be that your thermostat will die soon.
dr. sunka thank you so much for answer!
When I drive in city it does get to 90, after a long time. When im on the autobahn, it never gets there, and it seemed a bit strange...
Cheers mate, helped a ton 👍👍
Very helpful 😀
Thank you!
hello great video!! Do you think this will work for my 2009 a4 quattro?
did it work? I’m gonna try it on my a5
Thanks Arnie!
Thank u
Thanks!!!!
thx helped a lot
Thanks that much
Thanks Man
Hi! I own a Q7 4L. I changed the stupid releas sistem 3 times already and today broke again. Is breaking exactly where the small ball on the end of the wire hold up. Is made out of cheap plastic with a poor design. Any hack for this? Or a place where can i buy a better one. One made out of metal maby
How about its not a problem of the plastic handle, but instead the wire is very hard to pull? Hence, the handle breaks over certain force. Take a look at the wire if it is bent somewhere or stuck, or something, maybe even oil it a bit.
Where can I order the release lever...
At last a vid the Bonnet a bonnet and not the hood ...!! It’s bonnet and boot . Not hood and trunk !!!
Thanks bro you saved me ass!! I imagine that it’s the same for a4, looks the same. What year is the tt btw?