But I love the Type R content... Have a full bolt on 2017 #00256 CW.... 384WHP and 391lb/tq It's a fun car got the same wheels as you too couldn't go with a better pick
I'm on spoon springs... Whitelines antilift kit (make sure you get an alignment) 27won rear motor mount 27won intercooler 27won exhaust Eventuri intake Rv6 catless downpipe Hondata for my tuner. Acuity full shifter upgrade Same eBay steering wheel Rally armor red flaps Mugen push to start Mugen visors Mugen tail lights Same side markers but clear Spoon mirror and side mirrors You got good taste ;)
Awesome video! Very insightful. Esp the last section about scrub radius. Choosing tires and wheels for the Type R is definitely more involved than other cars, esp because of the complex suspension/chassis geometry. In addition to the things you mentioned, Honda has also used their steering knuckle thing to counter torque steer. I might get 19" wheels instead of 18", only because I do not plan to lower the car at all. I believe that 19s will fill the wheelwell better :) Do you recommend a particular offset range for 19" wheels? Is there an online calculator which could help? Or, how about a tire with higher sidewalls? Like, maybe a 255/40 on 18" wheels? 265/40 might cause rubbing.
I've had my type R for a month. Definitely planning on get 18s for it . I live in the north east . Our roads are garbage. I'm constantly paranoid about bending the stock wheels on a hole. Gonna run a 255/40/18 tire. Should ride nice and safe.
Hey man knowing what I know now I think I would go with a AEM infinity for your ecu/ tuning solution you’ll buy one time and it’ll do anything you ever want to do
Another great video!! Your car looks so good!! I enjoy each video!! I bought a 2019 Sonic Gray Pearl TypeR exactly a year ago and it has been so fun!! I put some 18” Enkei ts-v wheels and I love how they fit!! I put some I bought some Rally Armor mud flaps as well!! Keep up the great work and content!! God bless!!🚙🚙😀😀👍🏽👍🏽
Okay, I just want some clarification. With the 18x9.5 wheel and 265/35 tire, you are not rubbing or you rub on bumps? Im looking to get a similar setup but I am like you, in that I do not want to cut, trim, or roll anything. Are the camber plates required?
Dude love your videos and I will say that on my own type r i have some 18x9.5 wheels with a 36 offset and I run them on a Falken Azenis tire. Its a 265/35 and i don't have issues with torque steer I was really happy that I don't have to fight it like my old car lol I really heard a lot about the torque steer at first, but it's actually not like the way it sounds like it would.
TORQ Toolbox I got the Machine Black. I ended up getting the +35 🤷🏽♂️ they were backordered by 8 weeks when I ordered them. Should be receiving them at the end of the month 🤞🤞🤞
So if i buy 18x9.5 ts5, i shouldn't have an issue with stock height? I been looking at wheels for months and those titans have been my favorites. Ppl say don't buy them because they're a track wheel. Is there a problem daily-ing a track wheel?
Deepanjan Mazumdar well as long as the total circumference of the wheel and tire is the same or nearly the same as stock, going -2 on wheel sizing it will not really look any different.
I was thinking Michelin Pilot Sport 4S as well. However, I was thinking 265/40ZR18 instead of 265/35ZR18, just so that the overall diameter of the wheel/tire setup is closer to the OEM diameter, which should limit any speedometer misreading. I was wondering why you and everyone else seems to go with the 265/35ZR18 instead of the 265/40ZR18. Is it because of the lowering springs? If you didn't lower the vehicle, would you have gone with 265/40ZR18?
I beleive the 40ZR will rub when lowered, but in regards to the speedometer When compared to my GPS Speedo, mine is only reading 1mph low at 80 MPH. For example when the car's Speedo Shows 80, I'm actually doing 79
I just lowered my R w/swift springs,& I’m getting a knocking sound on the right front. Are you getting the same thing? We’ve taken off twice,checked everything,& know everything is tighten correctly. But I’m still getting a knock. Any suggestions why?
Listen I absolutely love ur vids man everyone who does these type r vids seems like they just have unlimited amounts of money I am a broke college kid who Managed to get my dream and need normal mods us humans down here can afford
I bought the RS05RR wheels, 18x9.5 +35, they finally come in next week, curious to see if the torque steer will be introduced. I also have Swift springs sitting in my garage but I already knew that I didn’t want to install them on my OEM wheels because the fitment looks weird. I’m kind of a car noob, just curious as to why you decided to buy the Megan Racing camber arms?
loving the set up man !! im definitely doing the same thing was wondering … do the camber arms also fit year 21 ? on eBay says 17-20 just making sure before i order
Best looking type r I've seen so far. Great choices! I came over from your gun channel. I really want a type r but can't really afford one new and was thinking about a new si
@@TORQToolbox I've been really looking at them but what would you pick a new si or a used 17-18 r with 20-30,000 miles? Stock r of course I don't want one someone has already modded and probably beat on
replacement bump stops are like $10 LOL. Trimming them is recommended not required but trust me you will notice the difference when you hard turn the car due the bottoming out on the bump stops.
I have a 2019 type R and love this setup. However, I might’ve missed it, but I was wondering if you could explain the Camber Arms and why you chose to go with them. They’re a pretty large price point and want to ensure I know what I’ll be spending my money on. If I don’t get those camber arms, will I run the risk of torque steer?
Just came across your channel and I love how organized your videos are! So much good information. I would like to know if you can provide your sources for the +45 offset recommendation to avoid torque steer. I am thinking of getting the TE37 SL, but I can't find them in +45 offset or higher. I really like the wheels, but I don't want to introduce torque steer either.
Need some advice.. I live in Mexico city and planning to purchase some of these items. (1) Regarding the wheelsI have 2 options on the T-R10 FORGED 10 SPOKE WHEEL. 18x9.5+35 or. 18x9.5+45 which one you recommend? (2) I will also buy the Swift Spec-R Lowering Springs. The one that you buy are 1" lowered? (3) the Tires that you installed are 265/35 ? thanks, Francisco
Nice vid bro! I'm planning on getting the 2020 type r by end of June. After bout a year I was gonna get some wheels with round a +20 offset. I'm looking for a aggressive poke fitment lol U think torque steer would be bad and noticeable??
I haven't tried it personally but from what others have told me, they had +35 and it reintroduced torque steer. So I'd assume +20 would add significantly more torque steer
I'm looking into getting the same suspension/wheel/tire set up as you, but was wondering how much difference you've noticed with the speedometer. I've been doing some research but couldn't find out if the odometer would also be impacted. What's your take on it?
What’s the point of the camber arms? And are they necessary for the wheel, tire, and spring setup you have. I’m looking to get the same wheel, tire, and spring setup as you did but I don’t know what purpose the camber arms serve.
@TORQ Toolbox, even though you mentioned it in the video, I’d like to ask you two questions about your tire & wheel setup. First, does the new setup reduce the amount of jolt you feel when running over bumps, potholes and other road imperfections? Second, with the new setup, is the handling better, worse, or the same as the stock setup?
@@TORQToolbox Thanks man. I live in socal, but i bought the car from arrowhead honda in Peoria so its getting shipped to soon. Lookin forward to more content from you!
I wonder if your car run a little faster and better MPG with new light wheels than OEM? I heard that Speed Swift lowering is good quality and stiffer from Type owners on Civic forum. Titans is nice forged wheels with good price over Rays that cost too $$$. I have looked all your videos about your Type and love it! 👍
Hey man I got an fk8 with some oem FL5 wheels (265/30 19x9.5 +60). I picked up some fl5 forged wheels same size and want to run a thicker set up for these. The previous owner ran 275/35 without issue on his fl5. Wanted to know if you think I could fit a 285/30 on them. I’m sure a 275/30 will fit but I want that little extra. Stock suspension don’t plan on lowering it or getting any camber arms. Also where did you get those fender rock guards ?
Boss as always, great video, now question? What size 19 inch rims/tires would you recommend for the FK8? Everyone is going with 18's, but I just wanted to go down one size.
Since you had the springs for a wild now, did you get an error light? I hear we have to get a spring delete. Also can you go more in detail about the bump stop? I still want my ride to feel oem in comfort. Set up 265/35-19 or 265/40 -18. I don't know if these will fit that's why I'm asking.
Your camera skills are on point! I was seriously expecting you to get the gun metal grey color wheels to semi match the carbon fiber inlays on your car, Regardless of that your Civic looks sick!
Based on your recommendation, I now have the exact Titan 7 setup +45 offset, 265/35/18 Michelin 4s on otherwise stock suspension. After breaking them in over 2,000 miles I still have significant torque steer unlike what you experienced. Do I need to add camber arms or lower the car to eliminate torque steer?
My goodness!! You’re so informative, I love it! I’ve been searching for the overall close to stock but a bit more aggressive wheel/tire setup. You pretty much answer majority of my wondering mind in one video! I’ve search and search, your video just confirm my decision. I can go hibernate now. Lol And by the way, beautiful car you have sir!
AWESOME setup...I had a similar setup in mind once my 2021 Phoenix yellow TypeR or 2019 over 2020 still debating but I got plans which I would be sharing from day One...😎👍🏿
I love that he actually drives around for a month or 2 before posting the video to tell us what he thinks instead of just driving it down the street and posting the same day
Hey man I’m local in AZ would love to chat with you if you get a chance. I have a few questions on my FK8 build. Content is on point man!👌 keep it coming!
I have the exact same considerations you mention. I had eibach springs installed and I want to put volk 18x9.5 te37's. I'm hoping they come in a 45 offset. This video is ironic because you've described exactly what I'll be doing to my CTR. Except I'll be going with Army Trix valvetronic. But you got my spec perfectly. Thanks for your impressions and info. Great video.
Yup i daily'd mine for 8 months now and 7300 miles and a pot hole got me and now i have a bent wheel. I got the protection plan to so once i get that fix, I'm buying wheels.
these wheels look just like the BBS CiR i put on my boost blue 2021 FK8 this week! mine are 19.9.5 +40mm perfect fitment no rubbing and super agressive!!!
What an informative video. Thank you! Do you know if the camber was off by much when it got aligned? Just wondering if I need to purchase camber arms for a 1 inch drop.
My flow foamed Wedssport TC105x didn't crack and my friend who had slower lap time with TS5 18" was bent hitting the berm. As matter of fact. They all bend.
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Let me know what you guys think of my choice.. Also links for all the parts are in the description.
But I love the Type R content... Have a full bolt on 2017 #00256 CW.... 384WHP and 391lb/tq
It's a fun car got the same wheels as you too couldn't go with a better pick
I'm on spoon springs...
Whitelines antilift kit (make sure you get an alignment)
27won rear motor mount
27won intercooler
27won exhaust
Eventuri intake
Rv6 catless downpipe
Hondata for my tuner.
Acuity full shifter upgrade
Same eBay steering wheel
Rally armor red flaps
Mugen push to start
Mugen visors
Mugen tail lights
Same side markers but clear
Spoon mirror and side mirrors
You got good taste ;)
@@clintpopham5691 that's badass man
Awesome video! Very insightful. Esp the last section about scrub radius. Choosing tires and wheels for the Type R is definitely more involved than other cars, esp because of the complex suspension/chassis geometry. In addition to the things you mentioned, Honda has also used their steering knuckle thing to counter torque steer.
I might get 19" wheels instead of 18", only because I do not plan to lower the car at all. I believe that 19s will fill the wheelwell better :) Do you recommend a particular offset range for 19" wheels? Is there an online calculator which could help?
Or, how about a tire with higher sidewalls? Like, maybe a 255/40 on 18" wheels? 265/40 might cause rubbing.
Derek Robinson @ IMW is the king of these cars, your best bet.
Holy shit that's gorgeous! CTR is goals in life
Thank ya Bob!
I am not a Honda guy at all, but your Type R looks so clean that I had to watch the video! Great video! Suscribed!!
Thank you so much Luis! That means a lot brother
Why the camber arms? Did you find they are absolutely necessary? Do they help out with anything other than camber (steering, ride)?
I've had my type R for a month. Definitely planning on get 18s for it . I live in the north east . Our roads are garbage. I'm constantly paranoid about bending the stock wheels on a hole. Gonna run a 255/40/18 tire. Should ride nice and safe.
Love your vids! Type R owner here 🤘🏼
Thank you so much Michael... I really appreciate it man🙏
Hey man knowing what I know now I think I would go with a AEM infinity for your ecu/ tuning solution you’ll buy one time and it’ll do anything you ever want to do
I've heard great things about them, I might have to try it in the future
Another great video!! Your car looks so good!! I enjoy each video!! I bought a 2019 Sonic Gray Pearl TypeR exactly a year ago and it has been so fun!! I put some 18” Enkei ts-v wheels and I love how they fit!! I put some I bought some Rally Armor mud flaps as well!! Keep up the great work and content!! God bless!!🚙🚙😀😀👍🏽👍🏽
That's Awesome Shaun! I think the Gray looks sexy
Okay, I just want some clarification. With the 18x9.5 wheel and 265/35 tire, you are not rubbing or you rub on bumps? Im looking to get a similar setup but I am like you, in that I do not want to cut, trim, or roll anything. Are the camber plates required?
Dude love your videos and I will say that on my own type r i have some 18x9.5 wheels with a 36 offset and I run them on a Falken Azenis tire. Its a 265/35 and i don't have issues with torque steer I was really happy that I don't have to fight it like my old car lol I really heard a lot about the torque steer at first, but it's actually not like the way it sounds like it would.
bro that B-roll is fireeeeeeee
Those are real nice setup cars already and it's nice to see the improvements you've made. Thanks, man.
Great stuff man🔥🔥🔥. I’m getting my TS 5s soon. I’m on that waiting list.
That's awesome man, which color did you go with?
TORQ Toolbox I got the Machine Black. I ended up getting the +35 🤷🏽♂️ they were backordered by 8 weeks when I ordered them. Should be receiving them at the end of the month 🤞🤞🤞
So if i buy 18x9.5 ts5, i shouldn't have an issue with stock height? I been looking at wheels for months and those titans have been my favorites. Ppl say don't buy them because they're a track wheel. Is there a problem daily-ing a track wheel?
I’m thinking of getting TE37’s myself but I wonder how they’d look without lowering springs? 🤔
That's a good question man
Yeah, would love to see how 18" wheels look without lowering springs!
Gonna upload a vid once I get my wheels in!
Can't wait to see ur vid, Victor
Deepanjan Mazumdar well as long as the total circumference of the wheel and tire is the same or nearly the same as stock, going -2 on wheel sizing it will not really look any different.
I was thinking Michelin Pilot Sport 4S as well. However, I was thinking 265/40ZR18 instead of 265/35ZR18, just so that the overall diameter of the wheel/tire setup is closer to the OEM diameter, which should limit any speedometer misreading. I was wondering why you and everyone else seems to go with the 265/35ZR18 instead of the 265/40ZR18. Is it because of the lowering springs? If you didn't lower the vehicle, would you have gone with 265/40ZR18?
I beleive the 40ZR will rub when lowered, but in regards to the speedometer When compared to my GPS Speedo, mine is only reading 1mph low at 80 MPH. For example when the car's Speedo Shows 80, I'm actually doing 79
@@TORQToolbox Gotcha. That's not bad at all! Thanks, this is super helpful.
@@geo6763 255/40/18 is closer to OEM diameter and you get more sidewall too. Did you consider that size? Should not rub unless you lower the car.
@@deepncsu Yeah, thanks. I think I'm gonna go with the 40s and keep the stock suspension.
@@TORQToolbox Great information 👍🏻 Thank you
@TORQToolbox Do I need to purchase camber kit front/Rear for setup using 18x9.5 ET 45 with 265 35 18 with Swift Sports springs lowered ??
looks great, does this setup have any effect with three passengers on board?
I just lowered my R w/swift springs,& I’m getting a knocking sound on the right front. Are you getting the same thing? We’ve taken off twice,checked everything,& know everything is tighten correctly. But I’m still getting a knock. Any suggestions why?
Listen I absolutely love ur vids man everyone who does these type r vids seems like they just have unlimited amounts of money I am a broke college kid who Managed to get my dream and need normal mods us humans down here can afford
I bought the RS05RR wheels, 18x9.5 +35, they finally come in next week, curious to see if the torque steer will be introduced. I also have Swift springs sitting in my garage but I already knew that I didn’t want to install them on my OEM wheels because the fitment looks weird. I’m kind of a car noob, just curious as to why you decided to buy the Megan Racing camber arms?
loving the set up man !! im definitely doing the same thing was wondering … do the camber arms also fit year 21 ? on eBay says 17-20 just making sure before i order
Best looking type r I've seen so far. Great choices! I came over from your gun channel. I really want a type r but can't really afford one new and was thinking about a new si
Hey what's man! The newer SI's are awesome man
@@TORQToolbox I've been really looking at them but what would you pick a new si or a used 17-18 r with 20-30,000 miles? Stock r of course I don't want one someone has already modded and probably beat on
If i had a type r it would look like this, so gorgeous
replacement bump stops are like $10 LOL. Trimming them is recommended not required but trust me you will notice the difference when you hard turn the car due the bottoming out on the bump stops.
I mainly didn't trim them due to the guys at Swift telling me not too
I have a 2019 type R and love this setup. However, I might’ve missed it, but I was wondering if you could explain the Camber Arms and why you chose to go with them. They’re a pretty large price point and want to ensure I know what I’ll be spending my money on. If I don’t get those camber arms, will I run the risk of torque steer?
Just came across your channel and I love how organized your videos are! So much good information. I would like to know if you can provide your sources for the +45 offset recommendation to avoid torque steer. I am thinking of getting the TE37 SL, but I can't find them in +45 offset or higher. I really like the wheels, but I don't want to introduce torque steer either.
Need some advice.. I live in Mexico city and planning to purchase some of these items.
(1) Regarding the wheelsI have 2 options on the T-R10 FORGED 10 SPOKE WHEEL.
18x9.5+35 or. 18x9.5+45
which one you recommend?
(2) I will also buy the Swift Spec-R Lowering Springs. The one that you buy are 1" lowered?
(3) the Tires that you installed are 265/35 ?
thanks,
Francisco
following
Nice vid bro! I'm planning on getting the 2020 type r by end of June. After bout a year I was gonna get some wheels with round a +20 offset. I'm looking for a aggressive poke fitment lol U think torque steer would be bad and noticeable??
I haven't tried it personally but from what others have told me, they had +35 and it reintroduced torque steer. So I'd assume +20 would add significantly more torque steer
That b roll was insane, cleanest type R out there
Thank ya brother, ai really appreciate that man🙏
I'm looking into getting the same suspension/wheel/tire set up as you, but was wondering how much difference you've noticed with the speedometer. I've been doing some research but couldn't find out if the odometer would also be impacted. What's your take on it?
Very clean
i appreciate it man
So much yes!
Badass vid. Thank you. Subscribed
Less talk on video,more car porn.
did you need the camber arms or do you think you could go without it ? set up looks amazing
You can always do without them but you will wear the inside of your tire real quick. Plus it will give you a better stance with them
Leave the stock set up the adaptive suspension is calibrated to those springs. The handling with lowering springs will get worse.
Really beautiful set up. What are your alignment numbers? Camber front and rear specifically. Thanks!
This is the best overall Type R bolt-on video available! To clarify, the 2020 front grill is a direct replacement on the 2019?
Thanks, bro!
I got to say the best wheels other than stock are the Rays wheels
What’s the point of the camber arms? And are they necessary for the wheel, tire, and spring setup you have. I’m looking to get the same wheel, tire, and spring setup as you did but I don’t know what purpose the camber arms serve.
正義Masayoshi waiting for a reply on this too
@TORQ Toolbox, even though you mentioned it in the video, I’d like to ask you two questions about your tire & wheel setup. First, does the new setup reduce the amount of jolt you feel when running over bumps, potholes and other road imperfections? Second, with the new setup, is the handling better, worse, or the same as the stock setup?
That’s what I wanna know
So what do you think a 29mm offset will do that’s the offset for the wheels I’d like to get and there 18 by 8
I just purchased a RR 19 CTR. Thank you for your videos, they're inspiring and helps me with what I want done to my car!
That's awesome man, I'm happy to help
@@TORQToolbox Thanks man. I live in socal, but i bought the car from arrowhead honda in Peoria so its getting shipped to soon. Lookin forward to more content from you!
New subs as have a fk8 and no mods yet. Do agree have bent my 20" but still hods air lucky as cost £500+
Aww man...Sorry to hear that Jason
I wonder if your car run a little faster and better MPG with new light wheels than OEM? I heard that Speed Swift lowering is good quality and stiffer from Type owners on Civic forum. Titans is nice forged wheels with good price over Rays that cost too $$$. I have looked all your videos about your Type and love it! 👍
That's a good question man...I haven't really looked at my mpg because I'm always on the throttle...lol
@@TORQToolbox Yeah you can test it on MPG when you have a chance. That's cool!
I think that video set a new benchmark for quality regarding the FK8. Outstanding content and presentation! Subscribed.
Dude! I really appreciate it brother! Thank you man
Could you run 265s on these wheels ?
Love the wheels , and suspension is always a important purchase glad ur set up is clean
Thank you so much brother
Hey man I got an fk8 with some oem FL5 wheels (265/30 19x9.5 +60). I picked up some fl5 forged wheels same size and want to run a thicker set up for these. The previous owner ran 275/35 without issue on his fl5. Wanted to know if you think I could fit a 285/30 on them. I’m sure a 275/30 will fit but I want that little extra. Stock suspension don’t plan on lowering it or getting any camber arms. Also where did you get those fender rock guards ?
Awww Yeah!!
I run Titan7 T-R10 on my STI for track use and man they are amazing!! Looking into getting a set TS-5s for daily use.
That's awesome man! I'm glad others like yourself are enjoying the wheels
Are you running TPMS sensors? Didnt hear that in the pricing breakdown.. Great vid!
Boss as always, great video, now question? What size 19 inch rims/tires would you recommend for the FK8? Everyone is going with 18's, but I just wanted to go down one size.
Let me know
Nice video man. I am getting the 2020 type r in the new blue. My 2018 Honda Accord 2.0t will be traded in soon.
That's EPIC man!
Just picked up the same wheels in Satin Titanium for my 2.0T 6MT Accord. Cant wait to get them.
Since you had the springs for a wild now, did you get an error light? I hear we have to get a spring delete. Also can you go more in detail about the bump stop? I still want my ride to feel oem in comfort. Set up 265/35-19 or 265/40 -18. I don't know if these will fit that's why I'm asking.
Your camera skills are on point! I was seriously expecting you to get the gun metal grey color wheels to semi match the carbon fiber inlays on your car, Regardless of that your Civic looks sick!
Hey thank you Jason... I was definitely torn between bronze and gun metal
Did you rub with the OEM WHEELS LOWERED
No, but I didn't drive it too much when the OEM wheels were on it
OEM looks good as well. It's not like the 90s eh
Could you do a ATV build
Hopefully one day... Right now I don't have anywhere to store one
Hello sir i would like to ask if u cut or trim fender when u put yuor wheels and springs?
Based on your recommendation, I now have the exact Titan 7 setup +45 offset, 265/35/18 Michelin 4s on otherwise stock suspension. After breaking them in over 2,000 miles I still have significant torque steer unlike what you experienced. Do I need to add camber arms or lower the car to eliminate torque steer?
Did you ever get this resolved? I haven’t heard of others having issues but I have the same setup on the way and I am slightly concerned.
I still have significant torque steer. I feel like Torq Toolbox led me down the wrong path. I’m considering going back to my OEM wheels/tires.
@@JP-ne7xjI'm abit worried now as I've ordered wheels..
What tires did you go for
What’s the wheels spec and tires size. Thank you
Nice set up, man! Want that set on my ctr but leave the suspension stock. What do u think?
I think the 19" might look better on stock height...but that's just an opinion
I’m running 255/40/18 bridgestone on fastwheel 18x9 with a 40 offset and i think the setup is perfect , not any torque steer and it looks great.
BEST Civic Type R Wheels & Suspension Setup video on youtube!
Titan 7 wheels are made in China, hence the pricing
So are IPhones and 99 percent of all computers😉
@@TacticalToolbox and my egg rolls
Do you really need to change the rear upper camber arm if you do lowering springs?
My goodness!! You’re so informative, I love it! I’ve been searching for the overall close to stock but a bit more aggressive wheel/tire setup. You pretty much answer majority of my wondering mind in one video! I’ve search and search, your video just confirm my decision. I can go hibernate now. Lol And by the way, beautiful car you have sir!
The new wheels look more nicer than the stock wheels.
The new wheels make the type R stand out 👍🏼.
I agree man...I really appreciate the compliment
Thanks for the in depth explanation on why you chose the mods you did. Great video.
Awesome Terence I'm glad it was helpful man
AWESOME setup...I had a similar setup in mind once my 2021 Phoenix yellow TypeR or 2019 over 2020 still debating but I got plans which I would be sharing from day One...😎👍🏿
I love that he actually drives around for a month or 2 before posting the video to tell us what he thinks instead of just driving it down the street and posting the same day
Gonna put 1200 down for a type r
Might need more - depending on your credit score 🤔
do you think i need camber arms to ride with a 1 inch drop and 18x9.5 +35
Really informative and great editing on those shop shots! All that's left is to buy a Civic Type R next haha.
So how much rear camber are you running with the arms? Great video by the way!!
Are the camber arms needed for this setup to work?
Is this the same for the 2021 type r ?
I never would’ve know you were into cars , I’ve only seen your gun channel
Yeah....I've always been into cars, but couldn't ever afford to do anything until now
That’s awesome man
Haven’t I watched you play with guns in another channel?
Can you do your Titan 18" wheels with the stock springs?
Any issues?
That’s what I wanna know !! let me know something
If you wanna stay stock suspension get 19’s 18’s will have a hideous gap in the wheel well
Do you need to change your suspension to get this wheels and tires ?
nope
Hey man I’m local in AZ would love to chat with you if you get a chance. I have a few questions on my FK8 build. Content is on point man!👌 keep it coming!
I have the exact same considerations you mention. I had eibach springs installed and I want to put volk 18x9.5 te37's. I'm hoping they come in a 45 offset. This video is ironic because you've described exactly what I'll be doing to my CTR. Except I'll be going with Army Trix valvetronic. But you got my spec perfectly. Thanks for your impressions and info. Great video.
That's Awesome John.....the volks do come in +45 bit.ly/3bqeWRB
I'm really glad the video helped brother
With these wheels and offset will it rub on stock ride height?
0-60 video?
It's coming 👍
You have my dream setup! Great job with all the research you put into it.
True on wheel weight until u had rubber weight, it will be close
Don't you also have a gun channel?
Yup😉
265 on a civic Jesus Christ
Welp this video made me take my ctr out for a spin
I went with some 19in SSR’s.
OHHH those are Sexy
Yup i daily'd mine for 8 months now and 7300 miles and a pot hole got me and now i have a bent wheel. I got the protection plan to so once i get that fix, I'm buying wheels.
Great video man! Are you running a tune? With my 2019 SI it made a HUGE difference with just the 23psi basemap
yessir...I have a off the shelf map for it right now
these wheels look just like the BBS CiR i put on my boost blue 2021 FK8 this week! mine are 19.9.5 +40mm perfect fitment no rubbing and super agressive!!!
I didn’t know you are both Glock and a Type R guy
Heck yeah man
TORQ Toolbox same here. Champion white here... waiting for a couple of Holosun 508TV2 for a couple of slide upgrades.
What an informative video. Thank you! Do you know if the camber was off by much when it got aligned? Just wondering if I need to purchase camber arms for a 1 inch drop.
Hondas, man. Gotta love that high offset.
What you think about 245/30/20 tires and wheels 8,5 “ OFFSET 45 ? If I get this wheels I feel torq steering?
My flow foamed Wedssport TC105x didn't crack and my friend who had slower lap time with TS5 18" was bent hitting the berm. As matter of fact. They all bend.