Good point made about the lift gate functionality and gear selector indicator. I had to replace the TCM on my Escalade and both those problems were present.
I can’t thank you enough for this video! I let the battery go dead on my 2009 impala and now have the no circle around PRNDM issue. I just bought an MDI and “fingers crossed”, will be reprogramming the transmission control sensor.
Hello, your so wonderful helping everyone’s small questions, I have a 2009 Yukon Denali XL - Replaced Techm with a used working Techm from *Same exact donor vehicle and the techm part numbers are exactly the same (interchangeable), I purchased one slot on the ACDelco website and selected “reprogram” for modules TCM & ECU. All went well.. my vehicle still does NOT START, afterwards I check DTC with my bi-direc scan tool and my Yukon is still displaying the DONOR vehicle’s VIN, I’m aware they need to sync? Is there anyway to read and write or do I have to purchase another Slot and “OVERRIDE” and maybe manually type in donor VIN instead of auto scan my current? Thanks
I’ve just started getting into programming/diagnosing and may i say your videos are absolutely wonderful! I can’t wait to watch them all, so educational and informative. I was wondering if i can contact you if i ever stumble across any difficulties.
Also question while i’m at it, I’m getting a flashing red light on my bosch master tech ii giving me no communication with the truck but i have good ground on pin 5 and more than 12 volts at pin 16. Any ideas?
Hi, i have a Chevrolet cruze 2011,and i buy old TCU rebuild, the TCU had old vin number ,can i reprogramming even the old vin number is stock in this TCU ???
Good job boss. I have a question... When i will be replace and program a BCM, in the middle of the process i changed the old one for the new one, this process its just for the BCM? Or for any module more?
Hello, im trying to reprogram the transmission on a 2014 gmc sierra . But it only gives me 2 options for the j2534 by bosh and im using autel j2534 how can i manually enter the autel brand
Hello, I reprogrammed a Chevrolet Cruze Diesel 2014 ECU, a warning appears on the dashboard with the quality of the DEF fluid and they recommend make a ECU reprogramming, I did it but the problem persists, what will happen if instead of selecting the REPROGRAMMING option I select the SETUP option?
I have a 14 Silverado work truck with IO4 screen. I replaced the tailgate handle with the one that had a camera, plugged it in. I haven't been able to program the audio to recognize it (sps2). Any idea how I could do this??
so i have a question.... after you buy a mdi2 device and pay the $45 for the 24 month vin licesnse, is there anything else you have to buy? do you have to buy techline connect or after you pay the $45 for the vin it will let you download it? also if i have ecms i wanted to put the same vin on with the stock calibration on all 3 ecms would it let me do all 3 since it would be same vin written to it? or can you only do 1 ecm per vin?
Yes you can program all three PCMs separately with the same VIN subscription and that subscription will only let you program ECUs but not diagnosis. For diagnosis you would have to purchase yearly subscription which is very close to $4000.
My tech line connect gets stuck when I’m asked if I’m ok with using a vin slot and I get en error message that says tool lock not obtained .. have you seen this before?
Check your internet and make sure you have at least have one slot available. If not make sure fire wall, any antivirus system, and windows defender is off. you can also call the tech line for help. They are very helpful.
@@huyug1 thank you, I tried many times when I select ( Replace and program) it failed on the second portion of downloading, I will try again, thanks again!
How do you get it to connect to vehicle? I have pc suite for autel and tech connect download but when I go to scann it says error connecting with gds2 no device found but it comes up in maxi suite
Good point made about the lift gate functionality and gear selector indicator. I had to replace the TCM on my Escalade and both those problems were present.
I can’t thank you enough for this video! I let the battery go dead on my 2009 impala and now have the no circle around PRNDM issue. I just bought an MDI and “fingers crossed”, will be reprogramming the transmission control sensor.
Hello, your so wonderful helping everyone’s small questions, I have a 2009 Yukon Denali XL - Replaced Techm with a used working Techm from *Same exact donor vehicle and the techm part numbers are exactly the same (interchangeable), I purchased one slot on the ACDelco website and selected “reprogram” for modules TCM & ECU. All went well.. my vehicle still does NOT START, afterwards I check DTC with my bi-direc scan tool and my Yukon is still displaying the DONOR vehicle’s VIN, I’m aware they need to sync? Is there anyway to read and write or do I have to purchase another Slot and “OVERRIDE” and maybe manually type in donor VIN instead of auto scan my current? Thanks
I’ve just started getting into programming/diagnosing and may i say your videos are absolutely wonderful! I can’t wait to watch them all, so educational and informative. I was wondering if i can contact you if i ever stumble across any difficulties.
Also question while i’m at it, I’m getting a flashing red light on my bosch master tech ii giving me no communication with the truck but i have good ground on pin 5 and more than 12 volts at pin 16. Any ideas?
@@thecarsurgeon529 check if the Bosch mastertech drivers properly installed on pc.
Thanks for posting this :) as always appreciate your time
For some reason the program will not open from internet explorer or Microsoft edge. Only from the desktop application. How could I change that
Hi, i have a Chevrolet cruze 2011,and i buy old TCU rebuild, the TCU had old vin number ,can i reprogramming even the old vin number is stock in this TCU ???
Good job boss. I have a question... When i will be replace and program a BCM, in the middle of the process i changed the old one for the new one, this process its just for the BCM? Or for any module more?
You can always leave NEW module in the car before programming. It’s not necessary to leave original one in first than swap.
Hello, im trying to reprogram the transmission on a 2014 gmc sierra . But it only gives me 2 options for the j2534 by bosh and im using autel j2534 how can i manually enter the autel brand
You need to sign into www.autel.com and download and install maxi pc suite. After that all Autel j2534 devices will pop up on the list automatically.
Thanks bro for informative videos, please can you help me with the type of battery charger or mentaner do you recommend,thanks.
Hello, I reprogrammed a Chevrolet Cruze Diesel 2014 ECU, a warning appears on the dashboard with the quality of the DEF fluid and they recommend make a ECU reprogramming, I did it but the problem persists, what will happen if instead of selecting the REPROGRAMMING option I select the SETUP option?
After reprogramming option, setup option need to be run.
Awesome video! Do you need a license to purchase techline and to purchase the scripts to flash an ecm or tcm?
no you do not need a mechanic license but you do need some knowledge in tech and mechanics.
I have a 14 Silverado work truck with IO4 screen. I replaced the tailgate handle with the one that had a camera, plugged it in. I haven't been able to program the audio to recognize it (sps2). Any idea how I could do this??
I just bought when i click "access" pops a new page with error message " you are not authorised to use this page" whats wrong?
so i have a question.... after you buy a mdi2 device and pay the $45 for the 24 month vin licesnse, is there anything else you have to buy? do you have to buy techline connect or after you pay the $45 for the vin it will let you download it? also if i have ecms i wanted to put the same vin on with the stock calibration on all 3 ecms would it let me do all 3 since it would be same vin written to it? or can you only do 1 ecm per vin?
Yes you can program all three PCMs separately with the same VIN subscription and that subscription will only let you program ECUs but not diagnosis. For diagnosis you would have to purchase yearly subscription which is very close to $4000.
Did you have to buy tech line separately from the 45$ per behicle ?
No , so when you purchase the 45 vin they let you download tech line connect and use it
Why does it ask my for my TUN number? It is a remanufactured unit that comes with an aftermarket tab?
Hi, Friend. Autel Maxiflash JVCI support protocol CAN FD from Chevy Suburban 2021? Thank you.
Hello i was wondering how you connected the autel j2534 to the system?
Download and install Autel maxi pc suite to your pc.
@@huyug1 Oh okay will do thank you
It would work now on a 2022 Onix? I have a MDI2, but It says theres no support?
My tech line connect gets stuck when I’m asked if I’m ok with using a vin slot and I get en error message that says tool lock not obtained .. have you seen this before?
Check your internet and make sure you have at least have one slot available. If not make sure fire wall, any antivirus system, and windows defender is off. you can also call the tech line for help. They are very helpful.
If I use the same TCM can do this process to reprogram it ?
I have a 2008 Hummer H3 and every time i try to program a new or used BCM i get E4491 and E4423. Do you know why is that happening ?
diag.net/msg/m1vpuww9r0oqfmqlxpv8h7me5d
Does the software do crank shaft position relearn for Saturn Vue 2007 V6 L66 engine? Tech2 does not have this option in SPS2.
Any scanner would usually do that
exactly what would i need to program an electronic brake control module (EBCM) on a 2020 GMC Terrain?
Yes it’s almost the same exact way
Thanks !! Huge help
great video! imformative
Thank you for the video, Can i program a used transmission with TLC? Thanks.
Yes you can.
@@huyug1 thank you, I tried many times when I select ( Replace and program) it failed on the second portion of downloading, I will try again, thanks again!
@@NASSTRACINC TLC is having issues with J2534 devices as of now that might be the issue. For better solution use MDI2.
@@huyug1 thanks, will do try the Mdi2
No puedo registrarme con techlineconnect es gran problema el servicio al cliente no contesta
How do you get it to connect to vehicle? I have pc suite for autel and tech connect download but when I go to scann it says error connecting with gds2 no device found but it comes up in maxi suite
Sounds kind of weird but if you want I can help you. You can email me at huso.technical@gmail.com and I can help you if you want.
where you located
Olá amigo tudo bem vc faz a instalação do software. Via remota ?
Hello Brother. you activate the gds gm software licença techline
You didn’t have to do immo matching ?
I believe when it’s brand new ECM you don’t have to on certain models
Akun program?
Can you send me a copy of TLC installation package?
You can download at www.acdelcotds.com
@@huyug1 I can't open this link. I don't know if it's my problem
@@huyug1 Do you have a cracked version of TLC
@@涂龙龙 no sorry
I’m in Saudi Arabia
Hi
Has anyone had code e9043
Please send me hi I need your help