Farmertec MS660 "Kit Saw Clone" vs. Husqvarna 288xp vs. Husqvarna 390xp
HTML-код
- Опубликовано: 26 мар 2020
- Been wanting to do this a while....Start taking this big iron and running them back to back. NOT scientific as the chains are all with time, some more than others. Different bars. Plenty of barbed wire to ruin chains and times. AND the wood....not very regular. SO I posted the actual but general times, sort of an average. Interesting enough even with all that randomness those times actually represented the relative feel from one to the next. So while obviously not accurate, they did the job showing along with my impressions how those saws run relative to each other. BUT now my interest is peaked...you will see why if you watch, some myths are crushed. And now I want to know what I saw and felt is demonstrably true and can replicated. SO further testing will follow when I can get the time. The net is my old Bling saw beat it's way back onto the saw roster. Will reside along side my project red saws and the block and tackle 365 48mm with that VEC Popup piston sold through Lil' Red Barn. Interested? Take a look...:)
- Хобби
I'm a fleet command junkie! Good to see you back in the saddle again, building and testing saws. Thanks for the video. 👍👍
Nice video. See the wind chill is still there , my coveralls just got washed and put away who needs the weight. Just got to say, a sharp chain beats all the horse power you can throw at the wood.
As always, I enjoyed watching your latest video, Thank You Walt.
Happy to see your all healthy and having fun!
Thats a beautiful 288 Walt! Thanks for sharing
Good to see you again Walt, take care and we hope to see another video next week!
All the best!
They are all great runners!!! Good to see you back Walt, I was just telling my wife this week that I haven't seen you in a while, good to see you are doing!!!
I like the 88’s the power to weight ratio is spot on.
Glad to see You and the Misses are doing good,
I built an 066 a couple years ago and when I tried to install the BB head stock with a base gasket it had more than head slap it was more like a door stop, so I installed the 54mm head stock with base gasket and had .018 thou squish.
As you say mine is a Beast, only thing I done was cleaned the ports and transfers up, and gasket matched the modded muffler.
I can get it started without the decomp when cold but warmed up I'm not strong enough. 😖😤
Take Care and Stay Safe
I do roadside removals for a living and I hit barbed wire a couple times a week l. Sucks so bad especially when you get a chain perfect and it’s cutting like a dream then mayhem starts lol. I’m a serious sucker for a saw with a clamp on air filter . Great video 🌲🇺🇸🌲
been binge watching your videos that's for making a new one
I love the 288. I have a 288 with 28in bar that doesnt see alot of use but i would not ever sell. Good old saws.
Put an 8 tooth sprocket and a 20" bar and watch it eat some wood!
Funny thing about hitting fence when you dont know that you hit fence is you think the saw will cut better on the next cut but the damage is done!:)
Only happens when you have a nice sharp chain! Lol.
Nice to see ya back at it Walt. There will always be the occasional Barb wire as in all things?
Beautiful mate Cheers.👍 Nice.😆
Walt, thanks I need a saw vid .......
I have my 660 in storage condition and I am running my 360 and 440 as my primary saws, right now. While the 660 cuts faster than the 360 or 440 - they are lighter and handier and are almost as fast cutting. If I could just have one saw it would be the 360. I am sorry you never got the 360 where you wanted it. It has a 20 inch Total 2 bar and LGX chain on it.
Заябись пилы = Excellent chainsaws
Try to..:)
Use a ty strap on one fork, cute that side then the other. Works good fore me.
Jst picked up a 272xpg that needs a freshening.....
Bling saw would have started 3rd pull had you pushed the compression release, no? Good to see her back in action.
A younger version of me could have done that w/o decomp..:)
What John Deere is that?
2750
So wait a minute u sed u were gonna put them saws back in the shed and leave them sit. Well I'll take them off of ur hands if ur not goin to run them 😁