▸ SUBSCRIBE! bit.ly/3msp0Su ▸ Patreon: www.patreon.com/timberbiscuit ▸ Router Jig Plan: bit.ly/RouterJigPlan ▸ Project Plan: If you want plans, let me know in the comments
Thanks! Haha, yeah I played with that idea but ultimately just went with one drawer to balance the look of the sliding doors. When it was every other drawer I think it looked too matchy matchy.
Having a spider disappear in the woodstack is ok here i Sweden. Guess you got nastier spiders. And then ther is folks like PaskMaks that has a snake big as a firehose in his shop and is perfectly chill with it. They're just a different breed down there.
First video of yours that have come my way and I’m impressed. Taste is personal whilst skill is universal. The piece has features I like (contrasting timbers and textured front) but others that seem a touch plain. But, so what? You make the piece for your taste and not mine. I’ve been woodworking for over 45 years and hope I know my strengths and weaknesses. I think my major weakness is on design. Not that I can’t think of designs but the reality seems different from my mind’s eye. Things like sketch-up would help but you can’t teach this very old dog new tricks like software. One suggestion. Late last year, the Wood Whisperer put out a video reviewing the options for 2 pack hard wax oils. Now. Like you, I really like the effect of HWO. It adds protection but maintains that natural look. So, I was interested. The winner was Natura Onecoat which was a product I had never heard of. I contacted the makers who said that it had only been launched in the US recently and was not in the UK (where I am) yet. But, they kindly sent me a sample. Wow. It’s by far the best 2 pack HWO I’ve used. Everything from the design of the can (reducing spillage, skinning over etc.) to the buttery nature of the mix. And it goes so far. I had recently installed about $30,000 of European oak in my house and all of it was finished with Rubio smoked oak. How I came to know that product. From the repeated skinning over of product which led to so much waste to its coverage. This Natura would have saved me a lot of time, money and contributions to the swear box. From looking at Amazon US, it’s also much cheaper than Rubio. So, it seems that these Natura guys are onto a winner.
Thanks for the information! I hadn’t heard of Natura before but I will definitely check it out. And I agree, design is subjective so it will never please everyone. Prior to using SketchUp I have only been using it for a year), I just used my sketchbook and notes. But SketchUp has helped a ton.
Contrast :Let's go eagles 😢 Philadelphia in the building (noticed on the drill press logo although we lost). I normally use a flex shaft for the textures do u need to sand when using the router for the patterns on the front drawers?
Go birds! Though yes, it was a lackluster finish of the season. Anyway, I do a real light sanding with 220 just to knock down any high points but the bowl bit leaves a smooth finish.
Consistent contrast - great build. Ill be interested to hear if you have a problem with wood movement. The height of each door looks roughly 30 inches or so and i would guess during the summer they may start binding. But maybe not!
Thanks! I have a few hardwood sideboards I’ve built over the years, and all have large doors. So far, so good. Now if I move to AZ or somewhere with more sporadic humidity it might be an issue. But really the most cupping I’ve seen is negligible across the entire panel.
Consistency - It is amazing to me how prolific you are with not only your videos but the type of work you do. Quality of both are amazing. You must never sleep.
Thank so much! Yeah, I try to be pretty consistent 😉 haha. In all seriousness, I have another full time job. So it is quite a grind to make these videos and projects. So I really do appreciate the positive feedback.
Contrast. I'm curious why you didn't use some kind of mechanical fastener, such as brad nails or staples, to reinforce the rabbet joints in your drawer boxes. You obviously don't have an aversion to using mechanical fasteners where appropriate, so why not on the drawers? It's a very nice build and you should be proud of it. Nicely done.
I’m not a huge fan of using mechanical fasteners, so I use them as sparingly as possible. With the support system, I didn’t really have much of a choice, so it is what it is. But I didn’t really need them in the drawers boxes because I had the clamps and time. That said, if I was in more of a rush, I would’ve used pen nails. Thank you! Glad you enjoyed it.
Consistency - as it applies just to that drawer face. Someone below compared it to the car with one primer fender... just my aesthetic sense. That said, the oak/walnut contrast everywhere else is amazing, and I totally love the textured drawer fronts. I'm so going to steal that idea. The spider joke was good - in my shop, I let the spiders kinda do their thing. In return, they keep the gnats and flies (here in VA) under control, and also donate awesome wood dust catchers... the webs. They tend to leave me alone.
Yeah, the drawer fonts as a whole add a lot of character to the design. And I’m in VA, most of the spiders leave me alone but there’s occasionally one that pops up out of the blue and vanishes just as quick haha.
Contrast can be good but symmetry is more important to me so that one drawer at that level would have a high percentage chance of driving me nuts. The texture looks really good even though it’s just on the drawers.
Kaaahnnn!(trast) - Another amazing piece and a great video of the process. I can't believe how much you build and how much content you put out while having another job, very well done!
Contrast - It doesn't have to large amount of contrast example - a maple box with walnut splines. that little bit of contrast takes it to another level.
Contrast! Consistency is boring, plus it ties the base to the top cabinet in a fun way... esp love the way the woods contrast but the texture is consistent across the drawer faces.
Contrast but only up to as point and on simple looking pieces. I like that you really pushed it (my aesthetic) on this but it still really landed well.
Love the out of sight out of mind never had a spider disappear into the lumber rack comment. One day I saw a black widow spider in corner of garage near door. Next day, it was gone and lumber rack is near. For two years, I kept looking to see it; no luck.
Love the texture in the drawers. But more so, the contrast. I'm a big fan of contrasting woods. Some people don't like it, but it sure appeals to me. Great build my friend.
Contrast. Of course. This is honestly a very beautiful piece. One comment from a keyboard warrior: threads in wood is a recipe for disaster. I would have made a dovetail rails, you don't even need glue.
Thanks! I can understand the hesitation but I have used cut threads on a few dozen projects now and haven’t ever had an issue. And if worst comes to worst I know a guy that can fix it. 😉
Contrast. Do you have any small project ideas that you've done to practice new woodworking techniques? I have trouble coming up with project ideas when I don't have anything I NEED to build.
Yeah, I actually have a few videos on the channel of small projects that use mostly scraps. Check out the two woodworking projects for gifts videos for some small weekend projects.
Contrast definitely. Wow! That piece looks amazing. I feel the continuous grain on the doors and drawers is what makes this look so well done. Some people like to stare at paintings, while I like to look at fine furniture pieces. This is essentially a piece of art. I really love the textured drawer faces. That jig you used seems so simple! Also, yet again this video felt like 5min. I feel you've really refined your pace and information given for your last two videos.
Thank you man! Yeah, I look at furniture and much the same way. So I really appreciate your feedback. And thanks for noting the pacing. I’ve really tried to focus on that in the past couple videos. Thanks as always for the support!
Contrast! Sooo good dude! This is a masterpiece (both the videos and the project). I have really enjoyed watching you over the past two years. Your channel is easily in the top 5 woodworking channels. Thanks for sharing real woodworking for real woodworkers.
CONSISTENTLY CONTRASTING!! Get it, get it?!?!!? Oh I kill myself.... The TV Static seltzer water flavor joke I think is the BEST one you've ever dropped!!! All joking aside Shane I think this one hits my TOP 3 favorites. Hoping all is well Bud, Dirty Jersey out!!
Looks nice. However I foresee a problem with using such a wide piece of solid wood for the doors. With an increase in humidity, the doors will swell, and with such minimal reveals will end up binding top and bottom. The doors may also warp with changes in humidity. Best bet is to saw your own veneer on that nice bandsaw you have and veneer the doors, and you can do it so that they are still sequence matched with your drawer fronts. Leave the drawer fronts solid( obviously since they are carved). Quite a bit of work but worth it if you don’t want your client returning the piece to be remade(speaking from experience on that latter part). Cheers
Thanks! Yeah, I’ve made a bunch of pieces with doors that are large panels with no issues. I could have used the vacuum press and veneered the doors but again the relative humidity in my area is about the same year-round. Now if I were to ship this piece to Arizona or Hawaii, sure there could be some issues. But you’re right in that a MDF substrate would ensure things stay flatter no matter the area.
I admit to some confusion. What is the "lie" that is being told? While I admire how skilled you are; I don't see that this or the preceding video debunks any "lie" perpetrated by others to woodworkers generally. The title seems a little disparaging of other woodworker videos that also reflect, in my opinion, a great deal of skill and the information they provide has proved useful to me numerous times. They were not "lying" and nothing in this video demonstrates otherwise. I admit, I clicked on this series because I was curious what "lies" were being told; but in the end I have to conclude that the clickbait title has nothing whatever to do with the content of the video.
I think a lot of woodworkers get overwhelmed by all the nonsense of RUclips and social media in general. I have a different agenda in that I think woodworking videos should be about the woodwork, not trying to sell you something. I'm sorry if you feel duped in that regard but hope you learned something and enjoyed it along the way,
Consistence/contrast. Great build just do not understand why only one drawer front was different. Just my opinion which of course doesn’t matter, but I would have done every other one or none.
Thanks! The drawer front helps balance the contrast of the upper sliding doors. I played with doing every other but then it felt a bit unbalanced. So it was an intentional design choice.
Hi, I accidentally saw your video which was presented in a reaction video from a german woodworker. Congratulations for this exact work and the great idea for this furniture (sorry for my english, I am from Bavaria). Best regards!
You need some of the track saw tools that do provide accuracy, except they are really expensive for what they are, and like you, I already own the table saw.
Consistency. This is only the second video of yours that I have watched. The first was part 1 of this build immediately before watching this one. I appreciate that you don't come across as a shill and mention brand names for every product or tool you use. You have a new subscriber, and I'm now heading down the rabbit hole of your back catalog of content. Keep up the great work!
Nope, just a real deal here haha. I hope you have a good time going through the catalog a lot of there’s a lot of fun projects. And welcome to the channel!
this is the first video of yours that I've watched. very reminiscent of Four Eyes videos. camera work, story telling, humor, and clarity are all top notch. I think you're definitely going places with this channel :)
Contrast is the only right answer. It looks so good here! You did a hell of a job with this project. I am always amazed by how much detail you incorporate into your projects and this one was no exception. I’d love to get a plan for the router jig. Thanks for making woodworking videos for woodworkers, keep it up!
Contrast for sure, Absolutely an amazing piece your attention to detail is so amazing you Sir are a true artist and craftsmen always look forward to your videos and your sense of humor . Keep up the amazing work.
Contrast for sure. Just an amazing piece, wow. Curious if you are worried that overtime those threaded holes will loosen/lose the threading with seasonal movement?
Thanks! And great question. I’ve used wood threads on a bunch of pieces now and have never had a problem. Plus the added glue should go a long way in preventing any issues. And the counter gain runs in the opposite direction so there won’t be any movement pushing outwards.
Could you do a bit of a cameo on the way you get that scalloped texture on the draw fronts. I see how you use the router. But issues such as how deep, do you sand later and any other intricacies in the process. Thanks for a great video as usual.
Your furniture design and execution is top notch. Really like all the little details like the textured drawer fronts and continuous grain across drawers and doors. I appreciate that your channel focuses on quality furniture builds that are well produced and not a bunch of tool reviews, etc. Been watching your videos for a while and. I look forward to more content from you.
Thank you! I love the details and design side of woodworking. Sure tools are great but I enjoy using them more and letting the work speak for itself. I’m happy to have your feedback and support. Cheers!
I’ve had excellent results with cutting threads numerous times now. I have zero concerns there. Not to mention the supports are also glued to the base.
Consistency. But it's close. My initial response is that the single contrasting draw gives me "car with one primer fender" energy. But the more I look at it, the better I like it.
![Yailin La Mas Viral, @kreizyk.official - Dale 2 (Remix) [Video Oficial]](http://i.ytimg.com/vi/JaYHBzgqz94/mqdefault.jpg)
▸ SUBSCRIBE! bit.ly/3msp0Su
▸ Patreon: www.patreon.com/timberbiscuit
▸ Router Jig Plan: bit.ly/RouterJigPlan
▸ Project Plan: If you want plans, let me know in the comments
Contrast. Love the contrasting drawer face, it really adds pop to the project.😁
I appreciate it! I think the contrast in this piece ended up being pretty balanced overall.
Consistently contrasting? It looks amazing and I’m sure for many it’s great but my ocd would require an even number of contrasting ones hehe
Thanks! Haha, yeah I played with that idea but ultimately just went with one drawer to balance the look of the sliding doors. When it was every other drawer I think it looked too matchy matchy.
Seltzer Water tastes like TV Static might be the most accurate analogy I've heard yet. That stuff is nasty!
Truth!
Contrast 100% : in my opinion it stands out and screams custom built. Furniture looks top notch
No doubt, we need a break from the norm. Thank you!
I’m in with the plans btw. I will sign up to your patron account.
I’ll add it to the tally! And looking forward to having you!
Awesome video Shane!!! Sick build I love the drawer design. Also just when I thought the pun was over. arrrrr right. Hahahahahaah
Thanks man! Yeah, one lingered for a bit haha.
Having a spider disappear in the woodstack is ok here i Sweden. Guess you got nastier spiders.
And then ther is folks like PaskMaks that has a snake big as a firehose in his shop and is perfectly chill with it. They're just a different breed down there.
Haha, between the black widows and brown recluse, just gotta stay on your toes. Though I think a snake would probably be pretty distracting as well.
@@TimberBiscuitWoodworks I really hate critters that are in to chemical warfare. At least the wolves around here don't hide in the workshop.
haha, no doubt!
Contrast. I ❤ your content
Thank you!
Man I love your content. Where do you work out of? Like location in the country. Walnut is wild expensive where I’m at in western Oklahoma.
Thank you man, I really do appreciate it. I'm in Southern Virginia, it's still pretty pricey here as well.
@@TimberBiscuitWoodworks Preach.
First video of yours that have come my way and I’m impressed. Taste is personal whilst skill is universal. The piece has features I like (contrasting timbers and textured front) but others that seem a touch plain. But, so what? You make the piece for your taste and not mine.
I’ve been woodworking for over 45 years and hope I know my strengths and weaknesses. I think my major weakness is on design. Not that I can’t think of designs but the reality seems different from my mind’s eye. Things like sketch-up would help but you can’t teach this very old dog new tricks like software.
One suggestion. Late last year, the Wood Whisperer put out a video reviewing the options for 2 pack hard wax oils. Now. Like you, I really like the effect of HWO. It adds protection but maintains that natural look. So, I was interested. The winner was Natura Onecoat which was a product I had never heard of. I contacted the makers who said that it had only been launched in the US recently and was not in the UK (where I am) yet. But, they kindly sent me a sample. Wow. It’s by far the best 2 pack HWO I’ve used. Everything from the design of the can (reducing spillage, skinning over etc.) to the buttery nature of the mix. And it goes so far. I had recently installed about $30,000 of European oak in my house and all of it was finished with Rubio smoked oak. How I came to know that product. From the repeated skinning over of product which led to so much waste to its coverage. This Natura would have saved me a lot of time, money and contributions to the swear box. From looking at Amazon US, it’s also much cheaper than Rubio. So, it seems that these Natura guys are onto a winner.
Thanks for the information! I hadn’t heard of Natura before but I will definitely check it out. And I agree, design is subjective so it will never please everyone. Prior to using SketchUp I have only been using it for a year), I just used my sketchbook and notes. But SketchUp has helped a ton.
Contrast :Let's go eagles 😢 Philadelphia in the building (noticed on the drill press logo although we lost). I normally use a flex shaft for the textures do u need to sand when using the router for the patterns on the front drawers?
Go birds! Though yes, it was a lackluster finish of the season. Anyway, I do a real light sanding with 220 just to knock down any high points but the bowl bit leaves a smooth finish.
Consistent contrast - great build. Ill be interested to hear if you have a problem with wood movement. The height of each door looks roughly 30 inches or so and i would guess during the summer they may start binding. But maybe not!
Thanks! I have a few hardwood sideboards I’ve built over the years, and all have large doors. So far, so good. Now if I move to AZ or somewhere with more sporadic humidity it might be an issue. But really the most cupping I’ve seen is negligible across the entire panel.
Gotcha, thanks for the info
Not a problem!
Consistency - It is amazing to me how prolific you are with not only your videos but the type of work you do. Quality of both are amazing. You must never sleep.
Thank so much! Yeah, I try to be pretty consistent 😉 haha. In all seriousness, I have another full time job. So it is quite a grind to make these videos and projects. So I really do appreciate the positive feedback.
Contrast. I'm curious why you didn't use some kind of mechanical fastener, such as brad nails or staples, to reinforce the rabbet joints in your drawer boxes. You obviously don't have an aversion to using mechanical fasteners where appropriate, so why not on the drawers?
It's a very nice build and you should be proud of it. Nicely done.
I’m not a huge fan of using mechanical fasteners, so I use them as sparingly as possible. With the support system, I didn’t really have much of a choice, so it is what it is. But I didn’t really need them in the drawers boxes because I had the clamps and time. That said, if I was in more of a rush, I would’ve used pen nails. Thank you! Glad you enjoyed it.
Consistency - as it applies just to that drawer face. Someone below compared it to the car with one primer fender... just my aesthetic sense. That said, the oak/walnut contrast everywhere else is amazing, and I totally love the textured drawer fronts. I'm so going to steal that idea.
The spider joke was good - in my shop, I let the spiders kinda do their thing. In return, they keep the gnats and flies (here in VA) under control, and also donate awesome wood dust catchers... the webs. They tend to leave me alone.
Yeah, the drawer fonts as a whole add a lot of character to the design. And I’m in VA, most of the spiders leave me alone but there’s occasionally one that pops up out of the blue and vanishes just as quick haha.
Excellent. Your videos are always a treat. Humor too. Where you get the acrylic circle template? Looked crazy thick.
Thanks! Glad you enjoyed it. That is actually a template for my brand inlays. So it can with the kit I ordered but it works great for other parts.
Contrast can be good but symmetry is more important to me so that one drawer at that level would have a high percentage chance of driving me nuts. The texture looks really good even though it’s just on the drawers.
I hear ya. In this case the contrast is intended to create emphasis and balance the look of the walnut sliding doors above. Thanks for your feedback.
Kaaahnnn!(trast) - Another amazing piece and a great video of the process. I can't believe how much you build and how much content you put out while having another job, very well done!
Hahaha! This one pushed the limits as far as time goes. Luckily I started it around Christmas so I had a few extra days to commit to it. Thank you!
Contrast ok. Think with this one it's too much though.
Great job and great explanations
Fair enough, thank you!
Contrast - It doesn't have to large amount of contrast example - a maple box with walnut splines. that little bit of contrast takes it to another level.
No doubt! It’s all about the balance.
Contrast! Consistency is boring, plus it ties the base to the top cabinet in a fun way... esp love the way the woods contrast but the texture is consistent across the drawer faces.
I totally agree. The continuous grain and texture flow pretty seamlessly into the contrast. Thank you!
Contrast but only up to as point and on simple looking pieces. I like that you really pushed it (my aesthetic) on this but it still really landed well.
I totally agree. I love contrast, but if it gets too mishmashed it can fall apart quickly. Thanks!
Contrast.
Can that texturing jig be run horizontally across a panel to make a wavy pattern?
Yeah, totally! From more than three feet away, the texture looks a lot like curl in the lumber.
Love the out of sight out of mind never had a spider disappear into the lumber rack comment. One day I saw a black widow spider in corner of garage near door. Next day, it was gone and lumber rack is near. For two years, I kept looking to see it; no luck.
Hahaha, yes! The struggle is real.
Contrast or consistent. Nice work. How many sheets of ply did it take for this build ?
I appreciate it! Two sheets of 3/4”, and one of 1/2” and 1/4”.
Love the texture in the drawers. But more so, the contrast. I'm a big fan of contrasting woods. Some people don't like it, but it sure appeals to me. Great build my friend.
Thank you! Yeah, I'm a big fan of adding emphasis to specific details using contrast. I feel like that really makes parts stand out from the norm.
Contrast. Of course. This is honestly a very beautiful piece.
One comment from a keyboard warrior: threads in wood is a recipe for disaster. I would have made a dovetail rails, you don't even need glue.
Thanks! I can understand the hesitation but I have used cut threads on a few dozen projects now and haven’t ever had an issue. And if worst comes to worst I know a guy that can fix it. 😉
@@TimberBiscuitWoodworks Haha that’s true!
Contrast. Do you have any small project ideas that you've done to practice new woodworking techniques? I have trouble coming up with project ideas when I don't have anything I NEED to build.
Yeah, I actually have a few videos on the channel of small projects that use mostly scraps. Check out the two woodworking projects for gifts videos for some small weekend projects.
@TimberBiscuitWoodworks thanks man. Your videos are always entertaining, and your work is incredible.
Thank you!
Hola, muy bonita la textura en los frentes del cajón.
Glad you like it, thank you!
Consistent, but woodworking is art, its ok to color outside the lines 😂
I agree! Although, I do love some crisp lines haha
Contrast definitely.
Wow! That piece looks amazing. I feel the continuous grain on the doors and drawers is what makes this look so well done. Some people like to stare at paintings, while I like to look at fine furniture pieces. This is essentially a piece of art. I really love the textured drawer faces. That jig you used seems so simple!
Also, yet again this video felt like 5min. I feel you've really refined your pace and information given for your last two videos.
Thank you man! Yeah, I look at furniture and much the same way. So I really appreciate your feedback. And thanks for noting the pacing. I’ve really tried to focus on that in the past couple videos. Thanks as always for the support!
Consistent. I’d be interested in router jig plans!
Awesome! I should have that up this week.
Contrast. yes on the video of the jig for the router
Coming soon
Contrast! How thick were the drawer faces?
They are 3/4” and the gouges are roughly 1/8” deep.
Contrast! Sooo good dude! This is a masterpiece (both the videos and the project). I have really enjoyed watching you over the past two years. Your channel is easily in the top 5 woodworking channels. Thanks for sharing real woodworking for real woodworkers.
Thank you so much, that means a lot.
Spider disappear in the lumber rack😂
The struggle is real
Turned out to be a beautiful unit. Well done.
I appreciate it! Thank you
CONSISTENTLY CONTRASTING!! Get it, get it?!?!!? Oh I kill myself.... The TV Static seltzer water flavor joke I think is the BEST one you've ever dropped!!! All joking aside Shane I think this one hits my TOP 3 favorites. Hoping all is well Bud, Dirty Jersey out!!
Haha, thank you man! I swear that stuff is disgusting. I don’t understand how my wife and son drink it. I really appreciate it as always, cheers!
Contrast! Love this piece!
Thank you!
Looks nice. However I foresee a problem with using such a wide piece of solid wood for the doors. With an increase in humidity, the doors will swell, and with such minimal reveals will end up binding top and bottom. The doors may also warp with changes in humidity. Best bet is to saw your own veneer on that nice bandsaw you have and veneer the doors, and you can do it so that they are still sequence matched with your drawer fronts. Leave the drawer fronts solid( obviously since they are carved). Quite a bit of work but worth it if you don’t want your client returning the piece to be remade(speaking from experience on that latter part). Cheers
Thanks! Yeah, I’ve made a bunch of pieces with doors that are large panels with no issues. I could have used the vacuum press and veneered the doors but again the relative humidity in my area is about the same year-round. Now if I were to ship this piece to Arizona or Hawaii, sure there could be some issues. But you’re right in that a MDF substrate would ensure things stay flatter no matter the area.
I admit to some confusion. What is the "lie" that is being told? While I admire how skilled you are; I don't see that this or the preceding video debunks any "lie" perpetrated by others to woodworkers generally. The title seems a little disparaging of other woodworker videos that also reflect, in my opinion, a great deal of skill and the information they provide has proved useful to me numerous times. They were not "lying" and nothing in this video demonstrates otherwise. I admit, I clicked on this series because I was curious what "lies" were being told; but in the end I have to conclude that the clickbait title has nothing whatever to do with the content of the video.
I think a lot of woodworkers get overwhelmed by all the nonsense of RUclips and social media in general. I have a different agenda in that I think woodworking videos should be about the woodwork, not trying to sell you something. I'm sorry if you feel duped in that regard but hope you learned something and enjoyed it along the way,
Contrast bro. Looks great
Appreciate it!
Consistence/contrast. Great build just do not understand why only one drawer front was different. Just my opinion which of course doesn’t matter, but I would have done every other one or none.
Thanks! The drawer front helps balance the contrast of the upper sliding doors. I played with doing every other but then it felt a bit unbalanced. So it was an intentional design choice.
Hi, I accidentally saw your video which was presented in a reaction video from a german woodworker. Congratulations for this exact work and the great idea for this furniture (sorry for my english, I am from Bavaria). Best regards!
Thank you! I’m glad you enjoyed the build and came back to watch the finale.
Contrasting consistency
I can dig it!
You need some of the track saw tools that do provide accuracy, except they are really expensive for what they are, and like you, I already own the table saw.
Yeah, unfortunately I don’t have room for the MFT so the table saw it is.
Consistency. This is only the second video of yours that I have watched. The first was part 1 of this build immediately before watching this one. I appreciate that you don't come across as a shill and mention brand names for every product or tool you use. You have a new subscriber, and I'm now heading down the rabbit hole of your back catalog of content. Keep up the great work!
Nope, just a real deal here haha. I hope you have a good time going through the catalog a lot of there’s a lot of fun projects. And welcome to the channel!
Love the texture as well.
Thank you! I think it turned out pretty well
this is the first video of yours that I've watched. very reminiscent of Four Eyes videos. camera work, story telling, humor, and clarity are all top notch. I think you're definitely going places with this channel :)
Welcome to the channel! Chris does a fantastic job with his work so I really appreciate the caparison. Thanks for the support!
Contrast is the only right answer. It looks so good here! You did a hell of a job with this project. I am always amazed by how much detail you incorporate into your projects and this one was no exception. I’d love to get a plan for the router jig. Thanks for making woodworking videos for woodworkers, keep it up!
Thank you very much! I think all the details really came together in this one.
Contrast. Reminds me of my love of cherry with walnut splined picture frames. Plans also, I want to make one so bad.
Walnut and cherry, are another one of my favorites. I’ll add it to the tally.
contrast - very nice
Thanks!
Contrast for sure, Absolutely an amazing piece your attention to detail is so amazing you Sir are a true artist and craftsmen always look forward to your videos and your sense of humor . Keep up the amazing work.
Thanks so much! I love all the little details in this piece, I think they came together nicely. And I’m happy to hear you’re enjoying the work!
Contrast for sure. Just an amazing piece, wow. Curious if you are worried that overtime those threaded holes will loosen/lose the threading with seasonal movement?
Thanks! And great question. I’ve used wood threads on a bunch of pieces now and have never had a problem. Plus the added glue should go a long way in preventing any issues. And the counter gain runs in the opposite direction so there won’t be any movement pushing outwards.
Consistent. The OCD that my wife and I share would make our heads explode! Another great video.
Haha, sometimes you just have to get uncomfortable to get comfortable ya know. Thank you so much!
Contrast. I was going to say continuous at first but after seeing the finished product, my mind was changed. Great video.
Thank you! I think in the end it all came together really well.
Could you do a bit of a cameo on the way you get that scalloped texture on the draw fronts. I see how you use the router. But issues such as how deep, do you sand later and any other intricacies in the process. Thanks for a great video as usual.
Yeah, it’s a lot to fit in one video unfortunately. Maybe I’ll do a separate short or reel and discuss it a bit deeper. Thanks for the support!
Contrast definitely, I would love the plans for the consistent texture jig. Great build !!
I agree. I’ll probably have that one done this week but I’ll let you know. Thank you!
Wonderful piece of furniture, an articulate design that looks clean nonetheless. Truly inspiring craftmanship!
I feel quite good about the way it turned out. Thank you so much!
Wicked awesome build and always coming in clutch with the dad jokes!
You already know! I appreciate it man.
Nice video. But, a number four (or four/five) will not flatten a board.
Unfortunately, I don’t have a 5 1/2 so I get by with the four.
Your furniture design and execution is top notch. Really like all the little details like the textured drawer fronts and continuous grain across drawers and doors. I appreciate that your channel focuses on quality furniture builds that are well produced and not a bunch of tool reviews, etc. Been watching your videos for a while and. I look forward to more content from you.
Thank you! I love the details and design side of woodworking. Sure tools are great but I enjoy using them more and letting the work speak for itself. I’m happy to have your feedback and support. Cheers!
HAHAHAHAHA, I for 1 😂😂😂
It’s a sleeper haha
Contrast, the final look is beautiful, I'd enjoy having a piece like this in my home.
Thank you! It’s definitely a welcome addition.
Contrast! And can we get plans!?
I’m with ya! I’ll keep adding up the numbers for plans and let you know if/when they are available.
@TimberBiscuitWoodworks count me in like 10times if that helps lol
haha, noted.
Beautiful end results! So many details to make in and enjoy here.
Glad you enjoyed it! Thank you.
Consistent. You are a skilful wood worker and a very good video producer.
Much appreciated!
I really like the router jig you used for texturing. Slick idea.
Thanks! Yeah, it's a pretty simple solution.
The texture jig is stellar. I usually do it by hand with a gouge. Would totally be a time saver.
Yeah, it worked really well. It’s definitely going to be a go to in the future.
Consistency. What are the drawer handles? Link?
Here’s the link: amzn.to/49dIlvU
Contrast! I’ve found a happy medium with power tools and hand tools and I also love the wispy shavings!
This is the way.
@@TimberBiscuitWoodworks This is the way
Might want to consider treaded inserts instead of threading wood.
I’ve had excellent results with cutting threads numerous times now. I have zero concerns there. Not to mention the supports are also glued to the base.
Contrast. Jig please. That texture is awesome
Yeah! If I do the plan, I will be sure to notify you here.
Saw your eagles magnet. Do you live in Philadelphia area? I am in skippack. Just wondering
No, I’m in VA. Just a fan of the Birds. 🦅
@@TimberBiscuitWoodworks lucky, I was going to stop by and borrow the bandsaw…
Just kidding. Enjoy your videos. Keep up the good work!!
Haha, thanks glad to hear it!
Consistency for sure. Excellent work!!
Appreciate it!
Outstanding work 😍😍
Thank you! Cheers!
This is awesome! I love all the little details!
Glad you like it, thank you!
Khantrast is one of my favorite rappers
And Wrath of Khan is the best Star Trek film
How about consistent contrast?
oooh well played!
Consistency. But it's close. My initial response is that the single contrasting draw gives me "car with one primer fender" energy. But the more I look at it, the better I like it.
Haha, the Mere exposure effect is real.
magnifique bravo👏
Thank you!
Beautiful
Thank you! Cheers!
consistency - really like the draw handles!
Yeah, I'm glad I found them.
Cool build.
I appreciate it