Super buraz! Svaka čast! Svidja mi se sto radis sa "obicnim" alatima, a ne neko cim dodje do 100k, odmah Festool, Milwaukee, Ryobi i ostalo. Kad neko zna posao moze i alat iz Lidl-a. 👍👍👍 Veliki pozdrav drug
I love the plastic box idea as drawers. I have one question 1 why the carpet, would it not be harder to clean and would absorb greases etc. Fun project looks great
I agree, a very nicely planned and executed job, but carpet made no sense to me as a bench-top surface. I found hardboard sheet (mason board in USA?) was a good, hard-wearing and ultimately sacrificial top over (in my case) plywood. I varnished mine with polyurethane and it’s still going strong several years later despite being the spot for soldering, using a miniature lathe, measuring and gauging metal and wood, hammering and punching, etc. But, as I say, a really nice job, thank you. Les in UK
@@leslieaustin151 I did the same but slightly difference. Used 1 layers 3/4 ply wood then a 3/4 layer of mdf as a sacrifice. Makes it super thick so I can use bench dogs and don’t mind if I sacrifice the too just swap it out every couple of years
Fabulosa idea, has tenido un acierto en el uso de los cajones de plástico, son duros y consistentes, seguro que te lo copió, para un garaje pequeño o en nuestro rincón, se puede guardar y organizar.
Hello This is a gread work with your Low-budget tools its nice to see its not the tools its the men behind the tools to make good work. Best whises for more projekts. 👍
Increible trabajo. Impresionantes herramientas para realizar cualquier cosa. Mas su creatividad y buen manejo de cada herramienta. Ojala tuviera todas. Serua de gran utilidad. Pero muy costosas. Desde Argentina, graciss por enselar y mostrar ese gran trabajo.😊
You are an excellent master craftsman, I’m trying to figure how I could incorporate some version of this in a tiny house for storage, if I can find some version of the plastic crates here in the United States. I also may have to use 80/20 aluminum to build the frame for the plastic bins. Excellent idea and construction.
He should have shown what the rest of us would have done at 16:51. Drill JUST out of reach, stretched too far, slipped, dropped the shelf, fell of the cabinet and spend the next 10 minutes swearing!!
Tolko si je dobro napravio da neces da izadjes iz nje ni kod frizera da odes nego mora on da dodje da te sisa unutra 😂😂😂 salim se extra kao i uvek, samo neznam koji je ono materijal sto si stavljao na stolove mislim da ce ti biti prilicno zajeban za odrzavanje. Pozdrav
It is always good to see someone create something, but I will say that unless you have the plastic crates and metal tubing laying around and no electric bill I can see this project costing 750-1000 euro? Do you have a price breakdown?
Todos tenemos en casa una cortadora laser!! Fácil, barato y para toda la familia!! Te tenías que haber hecho la plantilla a mano que tampoco cuesta tanto...
Сделано красиво и мастерски, я только не понял зачем столешница была покрыта ковром? Там будет скапливаться вся пыль и жидкость пролитая на стол в процессе работы!
Nije loša ideja, baš tako nesta i meni treba. Gdje si nabavio te plastične sanduke i koliko su te koštale ove vodilice? Te su malo bolje nego one sa plastičnim točkićima.
Günstig ? Allein die Auszüge, haben einen mehr als sportlichen Preis und versuche mal günstige aber stabile Kunststoffboxen zubekommen. Aber sonst eine tolle Arbeit.
Olá vc teria algum plano para mini escritório para professora ? E assim era o quarto das bebês mas agora vai virar o escritório dela estiver poderia vender o projeto 😊. Des de já muito obrigado.
Какой странный лобзик без подошвы. О непонятен выбор материала для покрытия рабочей поверхности. И герметик на уголках верхней полки. Нопри этом аккуратно 👍
Looks really clean. Though don't know why you cut corners on painting the boxes. You also did the front and back of the frame and everything. But that's me. I would've finished those too. Great job otherwise!
Remember to click LIKE and SUBSCRIBE to the channel, it helps a lot. THANK YOU. 🤗
Gde si nabavio plastične kutije po toj ceni?
Klasse gebastelt. Danke für das Teilen deiner tollen Ideen. LG Christoph 👍 👍 👍 👍 👍 😊
Well done, it turned out no worse than expensive factory options. It looks great.
Super buraz! Svaka čast!
Svidja mi se sto radis sa "obicnim" alatima, a ne neko cim dodje do 100k, odmah Festool, Milwaukee, Ryobi i ostalo. Kad neko zna posao moze i alat iz Lidl-a. 👍👍👍
Veliki pozdrav drug
И идея хороша, и исполнение.
Особенно порадовала правильная высота рабочей поверхности стола - на ладонь ниже пупа.
Молодец.
Espectacular trabajo! felicidades!!! por cierto menudo crack con la caladora eh, ni con una tronchadora o mesa de corte dejo los cortes tan limpios!
MM77 Approved 👍🏼👍🏼……………………………………………….AWESOME idea for using the plastic boxes as drawers! You created a ton of usable space. 👍🏼👍🏼
Bravo !
Un conseil pour récupérer des caisses en plastique?
Merci. Bonne continuation.
Cool idea and great implementation, perfect for small garages, I'd love to see more videos like this, Greetings from Germany
Good work 👍❤️
I love the plastic box idea as drawers. I have one question 1 why the carpet, would it not be harder to clean and would absorb greases etc. Fun project looks great
I agree, a very nicely planned and executed job, but carpet made no sense to me as a bench-top surface. I found hardboard sheet (mason board in USA?) was a good, hard-wearing and ultimately sacrificial top over (in my case) plywood. I varnished mine with polyurethane and it’s still going strong several years later despite being the spot for soldering, using a miniature lathe, measuring and gauging metal and wood, hammering and punching, etc. But, as I say, a really nice job, thank you. Les in UK
@@leslieaustin151 I did the same but slightly difference. Used 1 layers 3/4 ply wood then a 3/4 layer of mdf as a sacrifice. Makes it super thick so I can use bench dogs and don’t mind if I sacrifice the too just swap it out every couple of years
@@leslieaustin151 He chose carpet, it's a specific workshop. for clean work without oil and dust
Nice ! Make some worklights in the top shelf!!
Fantastic build. You are an excellent craftsman!
Tnx👨🏭
Sve pohvale🏅👍👍👍
Hey mec, ta video est terrible, et ce que tu as réalisé.....j'en suis jaloux !
Excellent video, gave me some ideas for a plastic beer crate mobile rack I intend to build, why felt for the surface of the desk though?
I've just find out your channel and I'm loving your videos.
I subscribed.
Thank you and greetings from Portugal.
Fabulosa idea, has tenido un acierto en el uso de los cajones de plástico, son duros y consistentes, seguro que te lo copió, para un garaje pequeño o en nuestro rincón, se puede guardar y organizar.
Brilliant work young man👍
Zaje-fajnie to wyszło, pozdrawiam i dzieki za kolejny filmik
Nice high quality work. Great attention to detail.
Slainte,
DC🍀
Tnx 🧑🏭
Great idea! Excellent craftsmanship!
Tnx👨🔧
Nice workshop
Hello
This is a gread work with your Low-budget tools its nice to see its not the tools its the men behind the tools to make good work.
Best whises for more projekts. 👍
Браво Пешо.👍👍👍
😮 Ne ne čudim se ,to je tvoj rejting.👏💯👍
Congratulations, you are truly a good craftsman.
But I would really like to know where you bought those $2 cassettes!!! 😀
Ficou muito bom e prático. Parabéns pelo serviço bem feito.
Really impressive to put down so much work to have your own at-home barber shop 😊
Pero svaka čast...dobra ideja za moju garazu..
excelente trabajo!!
el laser ese de donde compraste.. esta muy bueno tambien..
Increible trabajo. Impresionantes herramientas para realizar cualquier cosa. Mas su creatividad y buen manejo de cada herramienta. Ojala tuviera todas. Serua de gran utilidad. Pero muy costosas. Desde Argentina, graciss por enselar y mostrar ese gran trabajo.😊
where can we find this type of boxes?
which model of STAHLWERK machine you used ? results looks perfect.
More videos from your workshop!!
Regards from Spain! 👏🏼👏🏼
Awesome!! 🎉
2:21 2:22
Brilliant idea! What kind of plastic crates are these? Where are they from?
You are an excellent master craftsman, I’m trying to figure how I could incorporate some version of this in a tiny house for storage, if I can find some version of the plastic crates here in the United States. I also may have to use 80/20 aluminum to build the frame for the plastic bins. Excellent idea and construction.
He should have shown what the rest of us would have done at 16:51. Drill JUST out of reach, stretched too far, slipped, dropped the shelf, fell of the cabinet and spend the next 10 minutes swearing!!
Really cool idea!
Where's the lasercutter from?
hola el video está Genial muy bueno:
🤜🤛👍👊💪👌
how do you pain the plastic storage bin ? Special Paint ? Special prep? PLastic is kinda nautorious for paint not sticking to it. thanks.
繼續加油！fighting！😉😉😉🎉
Zajefajne, możesz powiedzieć gdzie dostałeś takie skrzynki i jaki mają wymiar?
pozdr
Amazing, you are so Brillant
Gde si kupio ove plastične kutije ?
He is highly skilled in manipulating small tools with precision and finesse.
Tolko si je dobro napravio da neces da izadjes iz nje ni kod frizera da odes nego mora on da dodje da te sisa unutra 😂😂😂 salim se extra kao i uvek, samo neznam koji je ono materijal sto si stavljao na stolove mislim da ce ti biti prilicno zajeban za odrzavanje. Pozdrav
Finally a RUclips person that can Fab and Weld properly lol.
Jakiej spawarki używasz?
Hi, what size steel do you use?
bravo tres bonne idée 🤩
Me gutaria saber cuales son los guantes que usa, parecen comodos,
Super cool 🙂
Встаёт вопрос,а где же взять столько ящиков и труб,ведь они не каждому по карману
❤ класно
Boa ideia , gostei. Deus abencoe. Moises. Campo Limpo Pta S.P.
skąd kupowałeś skrzynki ?
Parabéns muito bom mesmo este ideia
Which laser did you use? Can you share a link? Thank you
😊👌
Bravo
great job
Мне очень понравилось!!! Только я бы сделал светлее!!!!
Jakiego jesteś pochodzenia? :D pozdrawiam
Is his to shelf upside down?😊
This is fire
Bella idea
Perfektní video a práce jako vždy
Vypadá to náramně pěkně
Klobouk dolů
Pozdrav z Čech
Ať se daří :-)
Gde si pazario gajbice? Koja cena?
Свака част мајсторе!
Ја направи бонбона
Svaka čast majstore
👍
P.S. nešto mi govori da ćeš nabaviti 3D printer.
Very nice
Respekt👍👍
J'ai apprécié ton travail .cool !!!!.je te donne un nom : le solitaire ça marche??
Me gustó la idea.... Buen trabajo!!! 😉👌
Just like Doctor DS 👍🏻
Don't know if I have the patient to paint all the crate man... Nice setup
Mega 👍🏻👍🏻👍🏻
Ciao, dove si possono procurare queste cassette in plastica?
It is always good to see someone create something, but I will say that unless you have the plastic crates and metal tubing laying around and no electric bill I can see this project costing 750-1000 euro? Do you have a price breakdown?
Todos tenemos en casa una cortadora laser!! Fácil, barato y para toda la familia!! Te tenías que haber hecho la plantilla a mano que tampoco cuesta tanto...
total costs?
400$
Svaka cast pero 🫡🫡🫡
Сделано красиво и мастерски, я только не понял зачем столешница была покрыта ковром? Там будет скапливаться вся пыль и жидкость пролитая на стол в процессе работы!
How much did all this cost you?
What are the size and colours
Nije loša ideja, baš tako nesta i meni treba. Gdje si nabavio te plastične sanduke i koliko su te koštale ove vodilice? Te su malo bolje nego one sa plastičnim točkićima.
Günstig ? Allein die Auszüge, haben einen mehr als sportlichen Preis und versuche mal günstige aber stabile Kunststoffboxen zubekommen. Aber sonst eine tolle Arbeit.
Nice
Trabalho profissional!
Из под чего ящики?
Ящики для инструмента чтобы делать ящики для инструмента )))
💪💪💪👍👍
Olá vc teria algum plano para mini escritório para professora ?
E assim era o quarto das bebês mas agora vai virar o escritório dela estiver poderia vender o projeto 😊.
Des de já muito obrigado.
Bạn nên để kích thước chi tiết của Kệ để mọi người biết thông tin❤❤❤
19:10 best part !
Какой странный лобзик без подошвы. О непонятен выбор материала для покрытия рабочей поверхности. И герметик на уголках верхней полки.
Нопри этом аккуратно 👍
Очень интересно и ничего не понятно. Для каких целей столешница оббита напольным покрытием?
I don’t think this word “cheap” mean’s what you think it does. Great build.
Looks really clean. Though don't know why you cut corners on painting the boxes. You also did the front and back of the frame and everything. But that's me. I would've finished those too.
Great job otherwise!
me too... I'm obsessed with the fact that he didn't paint the whole box... only the visible parts.
👍👍👍👏
Хороша идея.