always start bolts by hand and use locktite and grease axles rear axle too cause they dont put grease on them when you need to remove axle it will be easier
I know you bolted it together fast for the video. If I was a buyer, I would take my time, put medium anti vibration thread locker on bolts just to be sure. You don't want anything vibrating loose at 50+ mph. Also, I would check other bolts all over the bike they are tight, engine bolts mounting bolts, etc.
how do you get to the air filter to clean it? it seems like its unnecessarily difficult to access it considering it needs to be clean around every 2000 miles and I cant get into it to clean it without taking the side panels off and possible the gas take as well. there has to be an easier way to access it. @161powersports4
I know this is an old video but im ordering this bike tomorrow and was wondering if the quad lock stem mount works on this bike or not. I dont like the handlebar mounts on sportsbikes
Looks like could've cross threaded that top bolt. Should use a T handle Allen tool to start bolts. Might suggest a rubber mallet instead of that hammer. That hammer can chip away finish causing rust.
I don't think I'd want anything from this dealership yikes scary I was thinking about and been looking at the Asian stepped through scooters motorcycles so forth and so on and my hobby is working on airguns I hunt with them do backyard plinking and I do quite a bit of tuning on them but if I worked on my airguns like you work on these motorcycles I would probably be dead by now
![Vitacci Titan 250 - Chinese Motorcycle - [Full Review] - Max Speed - Mods & More!](http://i.ytimg.com/vi/AgBktNfq-MU/mqdefault.jpg)
always start bolts by hand and use locktite and grease axles rear axle too cause they dont put grease on them when you need to remove axle it will be easier
I know you bolted it together fast for the video. If I was a buyer, I would take my time, put medium anti vibration thread locker on bolts just to be sure. You don't want anything vibrating loose at 50+ mph. Also, I would check other bolts all over the bike they are tight, engine bolts mounting bolts, etc.
Doesn't this bike come with an issue stalling, and why change the oil right away , what other problems are with this,
Nice looking bike but I don't have a fork lift
Can you please make and overview and test drive video of the Safari 200(DF200GKV)?
Where can I find spare parts for this type of bike
G street performance, they offer a stage 3 tune also
@@TheRealQ7ways where is that at
how do you get to the air filter to clean it? it seems like its unnecessarily difficult to access it considering it needs to be clean around every 2000 miles and I cant get into it to clean it without taking the side panels off and possible the gas take as well. there has to be an easier way to access it. @161powersports4
Proceeds to strip threads by not leading bolts 2:10
I can't work like that. Everything has to be started by hand and tightened by hand.
I thought I was the only one who saw that😅
you would think these bikes should come with a center stand
Can you do a test ride in this exact motorcycle?
We do a short test drive on this video
ruclips.net/video/7Zbo2qnWKpc/видео.html
What is the silver piece under the bike is that a vent
I know this is an old video but im ordering this bike tomorrow and was wondering if the quad lock stem mount works on this bike or not. I dont like the handlebar mounts on sportsbikes
If its for a phone mount, it should work. Please call us at 469-669-1313 for more details.
It only took as 20 or so mins! Wow!!
Me: *don’t have a fork lift* *looks at sibling*
Is the speed calibrated
Are you using hex or torx bits?
Looks Great and the video looks very good and easy to follow
Please if you’re watching this for help start your bolts by hand or you mess up your threads
is that a metal gas tank?
Yes
will this be available on your website
yes we do. Please give us a call at 469-669-1313 for more details.
Just updated the listing on the website, it should be there now to be able to purchase.
Do you still have this in stock?
yes we do. Please call us at 469-669-1313 for more details.
Just updated the listing on the website, it should be there now to be able to purchase.
I want this bike and it can only be shipped I wonder if I have to assemble it
We can have it shipped assembled. Please call us at 469-669-1313
Does it come assembled already?
Yes sir, we now have a way to have it shipped fully assembled turn key
Looks like could've cross threaded that top bolt. Should use a T handle Allen tool to start bolts. Might suggest a rubber mallet instead of that hammer. That hammer can chip away finish causing rust.
5 Speeds? Total how much + taxes + Discounts...?
This has 6 speed m, Please call or text us at #469 669 1313 and ask for Shawn and we can work out the deal for you.
Spend another 6 hours loctiting everything.
5 yall say its a 5 speed but website say 6 speed
It’s a 6 gear bike
Cross threaded the first bolt. Do by hand and use a torque wrench. Yikes
I don't think I'd want anything from this dealership yikes scary I was thinking about and been looking at the Asian stepped through scooters motorcycles so forth and so on and my hobby is working on airguns I hunt with them do backyard plinking and I do quite a bit of tuning on them but if I worked on my airguns like you work on these motorcycles I would probably be dead by now
Dude definitely cross threaded putting in that second handlebar screw. Smh brand new bike and now needs a new triple tree
The handlebars....cringe soooo hard. that is why i looked for self assemble. never know what the last guy or tech actually did.
I got a 24 and many bolt threads messed up
Send me one for free please: I’m trying to get out and have fun on a bike frfr
Hack job