Everything That Went Wrong With The Toro Proline (New Mower Reveal At The End)
HTML-код
- Опубликовано: 8 сен 2024
- *AFFILIATE LINKS*
Dulin Cut & Trim Amazon Storefront
www.amazon.com...
Protective Gear I Use:
www.amazon.com...
My Lawncare Uniform
www.amazon.com...
Lawn Care Equipment I Use
www.amazon.com...
Business Books I Recommend
www.amazon.com...
Lawn Mower Repair Tools
www.amazon.com...
Cool Lawn Equipment
www.amazon.com...
My Home & Truck Office Equipment
www.amazon.com...
Stuff I Think Is Awesome www.amazon.com...
I love these toro belt drives
Congratulations on the new mower brother! I bet that thing is an awesome machine 23 hp on a 36inch mower is crazy over powered and more power is always more better!
Awesome!!! So glad you decided to go with a hydro walk behind. Out with the old and in with the new. Your Toro served you well. Hopefully you will keep it as a backup mower.
The Goatster well I’ve noticed you have a habit of usually being right and that definitely played a part in the decision lol
Nice,...Note* Bradley hydro walk behinds are very good on slops. Smart purchase.
Very nice! Can't go wrong with a 36 hydro! Most versatile mower made. Can get in gates, can do a field If you have to, great on hills. Can't do hills with a 36 stander. 61 stander can, but a 36 slides right down, but you needed a 36. Probably the wisest move getting a Walk behind. Congrats my man!
Team Metal yeah the walk behind fit my long term strategy much better
Yay! Congrats man, excited to see the future videos on it.
Copper Creek Cuts Lawn Care thanks man
The Bradley looks good Randy, I also have a 36" Exmark but it's a Stander. I've always thought I would like to add a walk behind to my arsenal so looking forward to hearing about your new Bradley and your feedback on it. Happy Mowing and best of luck and thanks for sharing
I got one of these 37 pros mine has a Kawasaki 460 v and I'm looking for a replacement deck.
What is the bucket used for?
Congratulations, awesome. When you go to pick up the new mower make sure you bring tools with incase it is easier to uncrate before loading. You don't want to get home and not be able to unload.
Tony Falcone yeah I uncrated it at the fedex distribution center
@@DulinCutAndTrim oh sorry. I forgot you posted this last week.
I have a toro proline that has electric problems won't start where do I start
Good for you man. The particular briggs on that mower isn't awesome but a v-twin wont hardly work on a tiny 36 inch deck so I think it should do you well. Would rather buy an American machine personally but I honestly have looked into bigger WB from Bradley with the Vanguard
What do you mean by "American machine" They assemble it in Illinois
My dad gave me one of these with the kohler 14 he i just havnt gotten around to get it running
Hey Randy You Made it Work Rock On😎🤙
Glenn Evitt yessir!
Congrats on the new mower my man.
Btw, could you do a video on mowing the same lawn with the 30 timemaster vs 36 proline vs 36 Bradley? If I'm not mistaken you jot down the time you spend on each lawn. I'm curious to see a productivity difference. If you get the chance.
Btw, do you plan on keeping or selling the proline?
Ousama Abdu Ousama Abdu I’m gonna sell it. I have the data in my system for that comparison. I’ll dig it up and see what we get
I’m gonna sell it
Great video cool mower
Congrats dude, do you still have the 52, maybe as a parts mower?
Very nice man
I called it i knew you were getting a walk behind.
David lee lol you did!
Hi, I have issue with drive spindle assembly on my toro (same model as yours), what after market spindle drive did you use. The groves on the spindle shaft on mine are worn out. Would appreciate if you could let me know make and part no of the after market spindle drive that you used, did you have make modifications to fit it. Thanks in advance
I believe I used the one in this link but I had to reuse the existing pulley if I remember correctly www.ebay.com/itm/Toro-Spindle-105-1688-Fits-62Z-Center-/382527219393?_trksid=p2349624.m46890.l49286
@@DulinCutAndTrim - thanks,
I got one of these mowers given to me and it has not run in a few years at all. Not sure where to start. Any advice
Make sure it has oil, drain the old gas. Put in some new gas and see if she fires up. If she won’t then spray some starter fluid or carb cleaner in the air intake. If she fires up then dies you know your carb is gunked up and either needs to be cleaned or replaced. That’s how I would start
Thank you sir
@@DulinCutAndTrim now it’s not wanting to pull start. Any ideas
Where would the dom number be located also. Supposedly a date of manufactuee
Pull cord won’t pull. Any ideas
How hard is it to change cutting heights on the new mower? I was looking at that one too.
lsuman38 not as bad as I expected. I’ll cover that in the overview
Do you know where you got the spindle pulley from?
I believe I used the one in this link but I had to reuse the existing pulley if I remember correctly www.ebay.com/itm/Toro-Spindle-105-1688-Fits-62Z-Center-/382527219393?_trksid=p2349624.m46890.l49286
Good Stuff
Hargrove Lawn Care thanks man
How’s productivity in comparison? Any noticeable difference?
Zachary D time will tell because I’m still an amateur on a hydro but after 4 days I see a very minor increase in productivity on lawns under a quarter acre but on lawns larger than that I’m seeing a 24 percent increase in production rate
That’s awesome
Randy, how do you charge? Do you have a minimum for mowing?
Search "easiest way to price lawn mowing for beginners" I have a video on the topic that covers the basics of how I do it
I need your help I just got one or does mower but it doesn’t work do you know what’s wrong with it or how to fix it?
What’s it doing?
@@DulinCutAndTrim well I just got it yesterday and the guy who sold it to me doesn’t know what’s wrong with it and he gave it to me without a key
Kenny Moreno sounds like step one would be to get a key and try and start it
@@DulinCutAndTrim good morning sir so I bought a new key and it looks like it needs a oil and a new carburetor do you with kind of carburetor it is bc I look and i don’t know witch one it is
All I saw was a name on the carburetor walbro
Looking forward to learning more about the Bradley. I'd keep the Toro as your backup just in case.
george davis not sure I’m gonna keep the toro, I kind of see it as a money pit now
@@DulinCutAndTrim
I think keeping it as a backup is a pretty good idea, ya never know. There might be times when you take on a rough job that you don't want to put your new mower in, maybe something a bit too brushy ya know. Some of my mowers never see some yards, haha, they're just too rough.
Well you got your money out of it for sure I'm the same way buy used and fix.
R H yep fixing instead of buying new is my preferred method
$3600 divided by 20 yesrs= $180.00 not a bad deal.
Backyard Grill Master exactly what I said to my wife. I intend to own this machine for 15-20 years
If you keep the wet grass off the deck.....it will last much longer.
So the big question.. how much do you want for it?
My intention is to list if for $500 OBO
Dulin Cut & Trim that seems fair! I don’t have that right now but maybe if you still have it in a few months I’d be able to buy it.
Dulin Cut & Trim if you end up deciding you might take $350 for it please shoot me an email. I could most likely come up with that pretty soon. If not, that’s cool I understand man. Thanks.
Katrina Campbell email me at randy@dulincutandtrim.com and I’ll talk to you about it.
First off clean and dry your mower after used and it won't rust like that. Smh
Great tip smh 😁