The easy way to remove a seized injector
HTML-код
- Опубликовано: 22 дек 2023
- business and permissions inquires bodgitandleggit@gmail.com
www.welzh.com/?home
Welzh Vibration Mate; Master Injector Removal Tool
www.welzh.com/?product=4590-ww
Instagram
/ welzh_werkzeug
If an Bodgit And Leggit Garage, Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE:
/ bodgitandleggitgarage
paypal.me/bodgitnleggit
ko-fi.com/bodgitandleggitgarage
/ bodgitandleggitgarage
bodgit and leggit garage
tips and tricks inside this video hopefully help you
don't forget get your hands dirty
www.bodgitandleggitgarage.com/
bodgitandleggitforum.editboard...
/ bodgitandleggitgarage
/ bodgitandleggitgarage
Disclaimer:
Due to factors beyond the control of Bodgit And Leggit Garage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Bodgit And Leggit Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Bodgit And Leggit Garage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Bodgit And Leggit Garage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained 
Авто/Мото
All in links in the video description
4590-WW
3963-WW
4956-WW
4985-WW
4998-WW
44823-WW
More adapter all on there website
www.welzh.com/?home
remember lads this is not a toy dont go out and buy your wife one for christmas lollol , merry christmas leon
😂😂😂😂😂
Wow, what an amazing bit of kit!
Merry Christmas to you and yours Leon. Thanks for another year of great, informative videos.
Glad you enjoyed it Thanks a lot you too mate
Nice tool! Great job as always. I wish you and your family a merry Christmas and a happy and healthy 2024❤
You to mate
I'm definitely getting myself one of these, I've just spent 2 days trying to remove one seized injector on a Range Rover Sport, the front and middle ones came out easy, but not the rear one, the hardest one to access as always, it finally gave up yesterday lunch time, and thankfully wasn't damaged. Great video. Happy New Year to you mate.
did you buy this tool? and what's the update?
I have heard that modern engines often suffer from not being able to release there injectors, I worked on plant and commercial vehicles back in the 70s and 80s and this was never a problem, it would seem to me that there is a design problem that is the root cause and I think it revolves around poorly designed aluminium heads
They don't make them like they used to lol
hope you and your family have a great Christmas and a happy new year and thank you for the videos for 2023
Same to you!
Thats going on the shopping list of tools to get!
😊😊
What an awesome piece of kit
Thanks mate
Merry Christmas guys! Wish this had been released last week, I'd have gotten one for Christmas.
Same to you!
Have a great Xmas Leon appreciate your uploads cheers buddy 👍
Thanks a lot make you too
Get ready for all the vivaros with stuck injectors… one on mine broke part of the engine case it was that stuck. Looks like the perfect tool for them…
Don’t you just love it when a plan comes together 👍🏻👍🏻
😂😂😂
Thanks excellent video 👍 need that tool kit 👌
Thanks mate
Great toy to have in the toolbox..
Happy Xmas Leon!!
Thanks, you too!
Amazing tool
It sure is!
great way to get out injectors well done you
Thanks mate
Nice and easy good bit of kit .Do the top of the injector not do the calibration ? Or can you just put it back on and it's as good as new ?
Thanks Leon, grest video as always, not sure why you had to fabricate/weld a fitting to fit the injector, surely it should come as part of the kit as it seems to be a common injector type!
Thanks again for sharing mate.
Kind regards Jay
Thanks a lot, mate. Yes I agree. I was thinking the same thing. It should definitely have been included in the kit But I have to say have used it a lot since and it is very , very good
I’ve got one of them. Still yet to try it on a properly seized one 👍🏻🇬🇧
Have fun
Well, that'll be added to my list
Boom sorted
I love you lol. Love at first sight that one brother ha ha.
😂😂😂😂
Min 2:40 A suggestion if I may: It would be a good idea to use an injector repair kit...
can you tell me does injector needs calibrating if you unscrewing the top off it ?
Thats great! Would this be able to pull out the dreaded renault trafic injectors in the m9r engine?
Hi mate most probably not
Bargain at £150 on ebay, US Pro Tool and some other brands. I can think of some other uses for it as a power slide hammer! Will be ordering one after the festive thing.
its on ebay? I cant find this one on it. :(
Did you get one, if so which one and did it work ok?
Theres not enought thread on 2l tdi injector when top of injector removed tool keeps pulling tbreads
Happy christmas to all😊
Same to you
can you still use the injector after opening the top?
I will be changing my BMW F11 cylinder head cover gasket next weekend and need to remove the four injectors. I bought a sliding hammer in case they are stuck. Good to know this tool exists, but very expensive for a home DIY body haha (granted, cheaper then a single injector). Are you local (Hampshire) just incase? :D
The best way i found to remove stuck injectors, pour red diesel over the injectors, loosen bolts that hold injectors, start engine and let the engine compression and heat loosen injector. Even go for a short drive..
Unfortunately, I cannot think of many cars where you can do this with like this car, you cannot take the rocker cover off without taking the injectors pouring diesel into or on the injectors will just go into the head and will not go into the righreplace. And a lot of injectors will snap inside the Taking the bolt off and starting the engine when the injector is seriously. Seized will not do anything.
That'll keep any housewife happy. Great stuff mate
Yes And you will be demoted to the doghouse😂😂
Do this work for gas engines?
Question, the wrench / spanner you were using was that a Toptul brand ?
Yes mate
You need to try it on one of the M9R Traffic/Vivaro injectors
Or a 2.0 transit😢😢😢
Like I said in the video. This will not do everything. But it is a hell of a lot cheaper than the hydraulic press tool
Be interesting to see if this would work on a Vauxhall vivaro m9r injector
If you explore the website it lists all the injectors it works for. Given that injector is a European one, I’d imagine it will be suitable
It all depends some of them. Need the fifteen ton hydraulic press and even that doesn't get them all out
once had a mercedes vito with stuck injectors and if you loosen the bolt to the fastener(holder) a few turns and drive around you closest area then you can hear when it comes loose and just drive home and remove it while hot.
Doesn't always work that way. Especially when the injectors are completely seized, you will see videos on RUclips of hydraulic presses, putting over 15 tonnes on injectors and still not budging. No way your engine can do this and also sometimes you can cause damage. It will work sometimes just not all the time
Worked for me , vw1.6.
Would budge, loosen bolt. Good hard rev. Popped out.
Replaced and all good
lucky youve got that tool,you need it with them siemens pizo crystal injectors .ull be replacing them constantly
That's some job only small disappointment was the right adaptor for the injector
Mates I must have met I was disappointed too
so. you buy a kit and immediately have to bodge up a connector?
Lol yep
Where are you based mine needs doing ☘️🥃💚👍
The many uses of a pnumatic slide hammer.
Used one of these on my sprinter and all 4 injectors did not move
drip oil of wintergreen on stuck parts let sit and it works
Unfortunately most injectors you cannot do this with The reason is the rocker cover is in the way and half of the injector is inside the head. So doing this will just pour all that stuff into the head and the oil. And you cannot take the rocker cover off without removing the injectors first
This tool is good and had great success but 2010 Renault traffic injectors are a cock to get out it normally takes a lot of swearing and drilling grinding and a week to get all 4 out . The cap nut left in bottom takes finesse and a little bit at a time or it cracks the head if you try to pull out from the bottom which happens to me once I have got better over the years
All the joys of modern vehicles lol
Like many have said I would like to see it take out M9R injectors I have seen pneumatic pullers explode into pieces trying to drag them out even the Pichler.
Hi mate like I stated in the video. This will not do everything. If they are completely seized this machine will not do it. You need the hydraulic one, but unfortunately that costs a 100 times more.
Was excited to see this video, and the speedy results in getting the last b****d injector out with the new tool that arrived. NOPE - didn't shift it a mm even having drilled the entire sleeve out around the injector and having soaked it in WD40 pentrant for a week... :(
Note to all - it may not be as easy as shown here... 😢
So there's not an adapter provided in the kit that's suitable for a VW 1.6? Hmmmm?
I must admit I was disappointed with that as well
if you had only slackened all the injector anchor nuts half a turn and fired up the engine they w0uld usually break free it's an old fitters trick
If you know anything about modern injectors when they get seriously, see some of them Snap inside the engine with the hydraulic press. Putting over 15 tonnes of pressure on them starting the engine just will not work in these scenarios. It will work sometimes but can also cause a lot of damage
External injectors make a putty well around it fill with vinigar
Hope you didn't take it home Leon 😂😂😂😂
😂😂😂😂😂😅
it's not a solenoid , it's a piezo stack
Lol ❤
Thank goodness have a 1.4 VW engine! 🙄
lol try that on a vaviro injector won’t make a dent
From 3m 25s in.. there's a freakin face looking at you on the washer bottle.. anyone see it or do I have a need to see a shrink?!
Shrink time buddy.
😂😂😂😂😂
other brands $200 on amazon
👍
😫🥺😳 Volkswagen engine with faulty seized injectors? No just no it’s not possible it doesn’t happen! Next you will be trying to tell us Mazda mx5s rot and rover k series engine blow head gaskets.
😂😂😂😂😂😂😂😂😂😂😂😂😂 Wait what k series engines with blown head gas kits what have you been drinking
If it's an American tool then the spanner size will be 1". Hence the 25mm odd size. Lingering colonialism, don't you love it.
😂😂😂😂