Thank you for making this video! Its a pure example of DIY plus making best out of waste😃. My mobile holder was lying unused for so long, as its connecting portion was lost. I used the bottle cap & neck idea to fix it and now I can use it again!!! It looks cool as well. Thank you.
Thanks so much! I dont really wanna go through the process of removing that handlebar cap and all, but i figure you can just use a bike bell mount and hot glue it there.
This is very good. The only thing I would do is cut a hole in the black plastic, screw the bottle part in some how and then glue it. That way it can never detach, as its trapped between the bottle neck and lid. Also you have access to headset bolt.
Thank you for watching and commenting! Be careful, it's just an idea. The adhesive may not hold the plastic parts securely enough. The purchased holder will be better.
The length people would go to save little bit of money for proper bike mount. Really hope people make something like this for funsies, not for actual use. Phone is actually expensive.
Ingenious idea you came up with, great craftsmanship right there. Too bad you damaged your screen on the making ;-( Maybe there is a way of making a template of your phone or just put something thin and soft to protect the screen.
I spent a few days developing ideas and experimenting. Even there was an option to use a paper clip, just it damaged the protective glass on the phone screen. The paperclip was a metal without a plastic shell. Now you only need to replace the protective glass. The screen itself is not damaged. The latest version of the holder (the one on the video) is safe for the phone. It is desirable that the phone was in a simple silicone case, and the screen protective glass. If you're still nervous, you said you could put something soft on it. For example, glue pieces of rubber. Thank you! I am glad to your comment! Godspeed! :)
general build is ok, with the exception of the arms, I would pre-bend them so that they would be pushed out when the phone is locked in, NOT away an friction held in place, one bump an they could de-clip an bye-bye phone. If they were pushing in (because resting state was narrower then phone) on the sides at all times then this would not happen.
make video about real time GPS tracker..... waiting.....................................................................................................
Nice build, altho the lifting by the cellphone was a bit painful to watch :P I might make such a device for holding my phone with navigation in the near future
Gj on nails. Also I feel one piece bolted to frame would be more secure.No need for screw cap... Impossible to melt both plastics togetger in the oven instead of superglue? I feel like superglue can easily break if the bike falls or goes over a big bump.
If there is any doubt in the usual superglue, you can use special plastic. It kinda melts the plastic and better glue. I recently fell off my bike)) Mount in place. The phone is a little out of the seats. I think only a direct impact force on the holder may be damaged. Some of the shortcomings I mentioned in the description. Thank you for your feedback and questions! :)
Dial, great video, very impressed with detailed and clear progression in all steps of make. Especially pleased to see excellent work practice with the use of CA glue (super glue). It amazes me how little attention others pay to this particular detail, the result of which is, people all over the world are failing to get best performance from their glues.
This could be improved by cutting a portion of neoprene (for example, from an old waterproof CD holder) and placing it such that it grips the back of the phone and also offsets the impact of the road.
Joachim Amoroso stop this bro, dat was just a mistake, and like c'mon now who doesn't know the spelling of wheeler, it's just a mistake while typing so stop abusing him
Friends, ATTENTION!!! The video is entertaining, shows personal experience and IS NOT A GUIDE TO ACTION! You are responsible for all your actions!
idiot
love your vid man
Thank you for making this video! Its a pure example of DIY plus making best out of waste😃. My mobile holder was lying unused for so long, as its connecting portion was lost. I used the bottle cap & neck idea to fix it and now I can use it again!!! It looks cool as well. Thank you.
You have a lot of faith in super glue.My phone would go flying on the first bump I hit. Nice job though.
Thanks so much! I dont really wanna go through the process of removing that handlebar cap and all, but i figure you can just use a bike bell mount and hot glue it there.
This is real diy.
The superglue is very unreliably method! It glues hard but it's pretty fragile, it can break down because of vibrations.
Thanks for idea, i just finished my version. This video help me so much. Btw i secure it on old light holder and its very good. ✌
Great! I am glad that my video was useful for you. Very nice. That's right, let the old holder work further! Thanks for the comment!
@@dial2277plz suggest which bottle cap i can use for this phone holder
That clicking sound so satisfying
I like it too))
Superb idea... much appreciated....
bikes ready for the road
This is very good. The only thing I would do is cut a hole in the black plastic, screw the bottle part in some how and then glue it. That way it can never detach, as its trapped between the bottle neck and lid. Also you have access to headset bolt.
Thanks for the comment! Very good idea!
I like it...it looks very strong and rigid....i would try it
great job bro!!! 👍🏼👍🏼👍🏼👍🏼👍🏼
Awesome bro.. 👍✌️ wats ur profession btw ?
Thank you. its a very good idea. I olso will make.
Thank you for watching and commenting! Be careful, it's just an idea. The adhesive may not hold the plastic parts securely enough. The purchased holder will be better.
The length people would go to save little bit of money for proper bike mount. Really hope people make something like this for funsies, not for actual use. Phone is actually expensive.
Ingenious idea you came up with, great craftsmanship right there. Too bad you damaged your screen on the making ;-( Maybe there is a way of making a template of your phone or just put something thin and soft to protect the screen.
I spent a few days developing ideas and experimenting. Even there was an option to use a paper clip, just it damaged the protective glass on the phone screen. The paperclip was a metal without a plastic shell. Now you only need to replace the protective glass. The screen itself is not damaged. The latest version of the holder (the one on the video) is safe for the phone. It is desirable that the phone was in a simple silicone case, and the screen protective glass. If you're still nervous, you said you could put something soft on it. For example, glue pieces of rubber. Thank you! I am glad to your comment! Godspeed! :)
I tried
It's amazing
Dude awesome build!
general build is ok, with the exception of the arms, I would pre-bend them so that they would be pushed out when the phone is locked in, NOT away an friction held in place, one bump an they could de-clip an bye-bye phone. If they were pushing in (because resting state was narrower then phone) on the sides at all times then this would not happen.
That's pretty cool.
It's the best idea of i never seen
Thanks bro!
Simply amazing ❤️👌
Very nicely done 👍🏻
Thank you
Thats amazing good jub 😍😍😍🥰🥰🤩
Friends! What do you want to see in my next videos? What you like? Write your ideas.
make video about real time GPS tracker..... waiting.....................................................................................................
Plz show how to make bottle stand for cycles
How to style a cycle
nice video😎
really really cool !
Good stand
I like your work
Thanks
Nice as idea as well but some bikes don't have that mount on the steering wheel and other video ideas don't require so much work
Thanks for the feedback! Maybe I'll figure something else out!
Hello, friends! Do you like to ride a bicycle? :)
Yes
Plzz subscribe my channale
Yesssss!!!!!!!!
Dial Yes, and unlike Freddie Mercury, i DO like Star Wars
Dial yes
Nice build, altho the lifting by the cellphone was a bit painful to watch :P I might make such a device for holding my phone with navigation in the near future
Thanks for the comment! I was afraid of :) I wanted to demonstrate that plastic cards are a good material for a homemade.
Good work ..
What material
you using in side for hold the mibile
kalo kata emak gue, ngapain capek2 kaya gitu, mending beli ada yg harga 20rb
Some metal for background would be better
thanks for idea!
Very nice idea but fhone base for bikes he have only 3euro
Gj on nails. Also I feel one piece bolted to frame would be more secure.No need for screw cap...
Impossible to melt both plastics togetger in the oven instead of superglue?
I feel like superglue can easily break if the bike falls or goes over a big bump.
But apparently superglue is magical. Good tests.
If there is any doubt in the usual superglue, you can use special plastic. It kinda melts the plastic and better glue. I recently fell off my bike)) Mount in place. The phone is a little out of the seats. I think only a direct impact force on the holder may be damaged. Some of the shortcomings I mentioned in the description. Thank you for your feedback and questions! :)
Dial, great video, very impressed with detailed and clear progression in all steps of make.
Especially pleased to see excellent work practice with the use of CA glue (super glue). It amazes me how little attention others pay to this particular detail, the result of which is, people all over the world are failing to get best performance from their glues.
Thanks for the nice words! I'm glad you appreciated my work. I often use this glue at home. The composition of the adhesive: ethylcyanoacrylate.
Not true I tried it with the on bike on a city bus also took the bike on gravel roads worked unitil the glue lost it's bond due to contact points
Genius like me. Haha great job
Holy shit you made an odyssey from something that could be really easy. Not even building your own bike is so damn elaborate
Thanks bro
This could be improved by cutting a portion of neoprene (for example, from an old waterproof CD holder) and placing it such that it grips the back of the phone and also offsets the impact of the road.
Thank you for the addition!
very nice project! THX
thank you very much!
Why there is not a clip in the front? It's gonna come off when you brake. Plus superglue is not the best for this. Use epoxy.
How to get smartphone bike mount for cheap:
1) Walk around bike parking lot and look for phone mounts
2) Steal the one you like
so satisfying
Plz anyone tell meh which bottle cap i can use for the phone holder
I Wonder All this Materials Can buy a new one at the store...
Awesome
Nice
Amazing:)
Saan mu na kuha young cup???
Nice idea
Thanks! :)
Which glue ur using name pls
Osm idea
Better to buy mobile holder from shopping websites
Cool man
That's Cool
Thank you very much
If you go over a bump it’s gonna come off
Instead of the computer part, what else can I use?
Can be a flat piece of wood (laminate or veneer).
Dial Tks 😉
Best to use your own mobile cover/case instead of computer part
Your phone screen get damaged
What world do you live in that this is simple? Lol
I meant that everything is made from available materials and does not require special tools. Well, I agree, the average level of complexity))
Ek bump me na mobile rahega na holder..... Never want to try this
way to make scratches all over your phone bud.
Where do you get the cup?
Uh, what cup?
ANIME BAD PLAYER it's a Gatorade bottle top idiot
R.I.P. phone.... LOL!!! I wont trust that with my £800 phone
"Tip"
~YOU CAN ALSO DO THIS ON YOUR CASE
Or you just go and buy one
Or just go buy one
well, its nice and all... but i'm not gonna trust a $900 phone to creditcard pieces :)
I understand you))
I can picture a stupid kid tryin to do this and ends up burning his house down
this is not gonna fly! super glue will not keep it in place for a long time. No way I would put my iphone on this thing lol
God dam....just buy one ,there like 10 to 14 bucks
Nice m'y brother
Thanks
👍😍👍👍
If u r cycling in a rainy day!!!! Your phone will die!!!!
Why would you in rainy day
Ar u thinking???
Are you just encouraging people to use phones while driving?
Do you use the Navigator in the car? It's the same :)
Dial a car is way safer than a 2 wheller
DarkoMon hhahah 2 wheller😂😂😂
Joachim Amoroso stop this bro, dat was just a mistake, and like c'mon now who doesn't know the spelling of wheeler, it's just a mistake while typing so stop abusing him
PLANET MINECRAFT have you ever heard of a bike computer? To keep track of time spent, location, and distance riden?
No secure at all.
That's a waste! Only works on RUclips not real life.
🤓👍👍👍👍👍👍
Easy? Pffff
too much work, would just buy
It's just an idea.
O celular dele tava inteiro no início do video. Quando finalizou o celular tava trincado justo onde fica preso kkk. Tem um risco ai
Like
Scrap 😂😂😂😂😂
0:34 this hurt my soul
Andrius Daraškevičius same