you are the best modeler on internet... i got an idea... why dont you scan piece by piece your models and sell us your models to 3d print... but... a reasonable price sold 3d models are so expensive.... (i saw that you sold some 3d parts you made... i would like to by them... but your robots are just grate!
It's an awesome looking model. Like something that should be on a Terminator Hunter Killer. I would replace the gears for an o-ring and pulleys to get rid of the tinny sound of the gears. Add a sound chip, leds in the barrels and a smoke generator for the leds to flash off of. Also think about a rod and couple bearings to support the barrels better.
Something needs to be done to the ends of the barrels. As is, it's easy to tell the barrels are thin walled tubes. With some type of an insert you can make the ends of the barrels look like real thick walled rifle barrels with proper crowned ends.
One of the coolest pieces you’ve done. Maybe some grease to make the gears quiet. But you’ve probably already came up with some other method better than lubrication 😂
You missed a great opportunity! Cut a bunch of brass tube, put them inside of a compartment on the gun body, then when the barrels spin have the brass tubes eject like spent casings. :P Well done, though.
Think the Motor and Ammo drum should be switched around. Gatlings eat ammo and the current ammo drum is tiny compared to the Motor / feeding unit. BUT! Damn noice
That's super awesome! I.love the idea. I also would like to see lights on your models. Now i would like to suggest u to change the momentary button u used by a simple on/off switch, otherwise uw I'll need to keep your finger on the model to make it work
Very cool man!!! Although it could be even cooler with a bit more electronics going on. If you want to add more movement to the final model you could add a 'Beam Bicore Headbot' to the waist. Just use a motor / gearbox with a high ratio to make the turning side to side quite slow (you can also tune the movement by using ceramic capacitors with different values. The higher the value of pico Farads the less it would sway back and forth (I think that's right / might be the other way around). Also a few LEDs or flashing LEDs would add even more of a cool factor to something that is already pretty damn cool. Edit: once I've finished my current ongoing projects I might try to build something similar. You've Inspired me!!!
One of your best builds yet, fantastic design and wonderful problem solving! Can't wait to see the future chunky boi Kombat robot that is going to lug this one around ;)
Seriously cool man, this needs to go onto a tank like platform as the enemy to the Robot you've built, Or it would even be cooler if you could duplicate this gatling gun and put them on another robot in place of its hands, oh yeah! perhaps add a multi tube missile launcher on the current robot that way you can make a diorama that would make any Mecha game programers jealous! LOL well done dude, keep up the great work!
I see the ammo drum and the belt but how does it get to the gun? Your work is far superior to my own no question but the first gun you made for this project it follows the premise of real world design for a gatling gun.
Its a great work but as a learned industrial mechanic have tried to print the gear not like this in the straight form, what is much easier to make and like in RL are much cheaper in cost. But like you heard it even so much louder against not stright one can you maybe print in a curved form the gears, that the contact beetwen both are much more smoother to grip in each other. And so they are in the steel variants are much more quiter as straight ones.
Love the shape language but I feel like ammo box is too smol for barrel size? Especially for a Gatling gun. And how would the ammo feed into the gun? Only poking holes cos I love
Actually Rhys, just fyi is normally Said like "Reese" LIke Rees's Peanutbutter Cups", Normally anyways. It is not a normal Name by any means even here in the US, so I cant fault you for that, it is a real British name, which I find cool AF. I only know this cause of, sadly, Torchwood Series, and a few other British TV series I watch. Dont worry it is prob first time you ever seen it like that....first time I said it that way too when i say it spelled out. Over all Dang good build thank you for working it out the way you did and almost a tutorial I love it, keep it up!
I only see One problem and Is the Chain... Is goes from nowhere to nowhere, the Chain must goes from the magazine yo the gun, not from a tiny barrel to a wrong part of another barrel that Is not in the main gun... Also... You can make bullets with toothsticks and Golden paper for gifts to add in the Chain because... A Chain gun (minugun or totative cannon gun) needs a Chain of bullets yo Work.
Very good project! I love that you decided to add the motion of the rotating barrels.
Inspiring work as always!
Love ur channel
Thanks buddy!!
the thumbnail alone won my like =D
you are the best modeler on internet... i got an idea... why dont you scan piece by piece your models and sell us your models to 3d print... but... a reasonable price sold 3d models are so expensive.... (i saw that you sold some 3d parts you made... i would like to by them... but your robots are just grate!
Looks awesome. Adding a row of clipped brass rounds in the carrier would definitely be a benefit.
It's nice to see that you still using used plastic and stuff, and not 3d printed all the things
Aw man, this new robot is gonna be so cool!
Awesome!!
Awesome 👌
It's an awesome looking model. Like something that should be on a Terminator Hunter Killer.
I would replace the gears for an o-ring and pulleys to get rid of the tinny sound of the gears. Add a sound chip, leds in the barrels and a smoke generator for the leds to flash off of.
Also think about a rod and couple bearings to support the barrels better.
This dude is a God I swear it
Something needs to be done to the ends of the barrels. As is, it's easy to tell the barrels are thin walled tubes. With some type of an insert you can make the ends of the barrels look like real thick walled rifle barrels with proper crowned ends.
One of the coolest pieces you’ve done. Maybe some grease to make the gears quiet. But you’ve probably already came up with some other method better than lubrication 😂
I enjoy watching you so much!! It’s so inspiring!!
Pretty awesome there!
Artistry combined with craftsmanship. You sir are very talented and inspirational. Thank you for these videos.
You missed a great opportunity! Cut a bunch of brass tube, put them inside of a compartment on the gun body, then when the barrels spin have the brass tubes eject like spent casings. :P
Well done, though.
Your work is ridiculous. U should be working in the film industry for someone like Weta if u aren’t already!
your on some next level of scratch building🤯
a cheap china laser gun for sounds would be cool if you ever do another one🤔🍺
That is... perfect!
Cool I want to do this
Such great shape language and engineering... can't wait to see it painted!
This really activates my ape neurons.
BEAUTIFUL! Great video of the build. Thank you!
Super hyped for this one. I've also never used motion in models and I'm very inspired!
I'd love to just see the stockpile of odds and ends you have, i keep running out of room for mine.
Think the Motor and Ammo drum should be switched around. Gatlings eat ammo and the current ammo drum is tiny compared to the Motor / feeding unit. BUT! Damn noice
Could you add a red or white LED behind the gun barrels so it flashes through the barrels as they spin past?
The ingenuity that goes into each piece is mind-blowing! Fantastic outcome!!
Next level building!
Looks astonishing beautiful!
Great work! Glad to see your working process here.
MASSIVE, BADASS, Very cool loking! When will we get some "Gribliz?!" mugs and merch on your page?
Wonderful project. Your builds just look so professional; gorgeous to look at.
Super cool! Love your integration of different techniques (laser cut, 3d printed, and found objects)
UAU!! AMAZ!NG glad to follow you brother!
Very creative!
Fantastic Model
Genuinely fantastic build dude!
Oh no I've gotta start doing that.
Very cool
I love the last bit you added (the belt). Awesome project. Liked and subscribed
So awesome. Could the gun have been belt driven to avoid the rattling sound?
Ohhhhh mate! That is crazy cool, love it! 👍❤️👍❤️
Love your work. Have you considered using the ammo belt components with thicker wires to make highly articulated arms/tentacles/spines?
I wonder what size you could use for 1/100 Master Grade Gundam Heavy Arms
Looks super dope
that would work awesomely for a fallout powerarmor chaingun.
THanK GOD I FOUND YOUR CHANNEL! and your Advises! COOL!!! STUFF BRO!!! i do some of this also!
That's super awesome! I.love the idea. I also would like to see lights on your models. Now i would like to suggest u to change the momentary button u used by a simple on/off switch, otherwise uw I'll need to keep your finger on the model to make it work
Dude, great job!
Very cool man!!! Although it could be even cooler with a bit more electronics going on.
If you want to add more movement to the final model you could add a 'Beam Bicore Headbot' to the waist. Just use a motor / gearbox with a high ratio to make the turning side to side quite slow (you can also tune the movement by using ceramic capacitors with different values. The higher the value of pico Farads the less it would sway back and forth (I think that's right / might be the other way around). Also a few LEDs or flashing LEDs would add even more of a cool factor to something that is already pretty damn cool.
Edit: once I've finished my current ongoing projects I might try to build something similar. You've Inspired me!!!
One of your best builds yet, fantastic design and wonderful problem solving!
Can't wait to see the future chunky boi Kombat robot that is going to lug this one around ;)
Another great scratch build, Love to watch you work.
Nice one
Awesome!
Love from India 💐👌🏻🚩🇮🇳🙏🏻❤😍👍🏻😊
I would that kit👍
Amazing work 😁
Bloody marvellous Dude, I like a LOT! TFS, GB :)
Thank you so much! Your videos have taught me so much! Keep up the amazing work :)
I don't build models or anything myself..but this is very interesting to watch
Seriously cool man, this needs to go onto a tank like platform as the enemy to the Robot you've built, Or it would even be cooler if you could duplicate this gatling gun and put them on another robot in place of its hands, oh yeah! perhaps add a multi tube missile launcher on the current robot that way you can make a diorama that would make any Mecha game programers jealous! LOL well done dude, keep up the great work!
"choo double A batteries" nice
Cool
Earned a like and subscription
Now make a Feldreẞ :)
Muito bom. Parabéns!
I see the ammo drum and the belt but how does it get to the gun? Your work is far superior to my own no question but the first gun you made for this project it follows the premise of real world design for a gatling gun.
You Rock!!!!
Does it cost $400,000 to fire it for 12 seconds?
😮👊🏼
Obrigado meu lindo gatinho.
Voce é brasileiro? Que legal!
Its a great work but as a learned industrial mechanic have tried to print the gear not like this in the straight form, what is much easier to make and like in RL are much cheaper in cost. But like you heard it even so much louder against not stright one can you maybe print in a curved form the gears, that the contact beetwen both are much more smoother to grip in each other. And so they are in the steel variants are much more quiter as straight ones.
when will we see what this piece ends up going on o:
*Big gun*
Love the shape language but I feel like ammo box is too smol for barrel size? Especially for a Gatling gun. And how would the ammo feed into the gun? Only poking holes cos I love
Actually Rhys, just fyi is normally Said like "Reese" LIke Rees's Peanutbutter Cups", Normally anyways. It is not a normal Name by any means even here in the US, so I cant fault you for that, it is a real British name, which I find cool AF. I only know this cause of, sadly, Torchwood Series, and a few other British TV series I watch. Dont worry it is prob first time you ever seen it like that....first time I said it that way too when i say it spelled out.
Over all Dang good build thank you for working it out the way you did and almost a tutorial I love it, keep it up!
you have a brazilian accent, am i right?
Siêu phẩm
incredibly based
Que isso cara fico foda de mais.
I only see One problem and Is the Chain... Is goes from nowhere to nowhere, the Chain must goes from the magazine yo the gun, not from a tiny barrel to a wrong part of another barrel that Is not in the main gun... Also... You can make bullets with toothsticks and Golden paper for gifts to add in the Chain because... A Chain gun (minugun or totative cannon gun) needs a Chain of bullets yo Work.
actually.....
Nice job but your amo box is totally impractical.
Awesome!