Ok friend. Cut all wires behind the key switch. One red, one black, one green, one black with white stripe. Connect the red and black together. It starts. To stop motor, touch the black with white wire to the spliced red and black wires. Green wire does nothing. Now hit "like" if it helps. Im just curious as to how many people this video helps. Lol because i couldnt find one to help ME. Thats why i figured it out. Good luck.
where did you cut the wires the ignition side or the wiring loom side of the conector cos the conector with the little wire pushed in the side theres no wires got me cofused
Your video helped me to not only start my moped but helps to figure out that I had an ignition switch problem all along! Great video! Aloha and Mahalo from Hawaii!!!
Thanks a lot!! I lost my set of keys and had my scooter ignition key and I only have the trunk key now. So thanks like you said everyone's a hater and don't want to help anybody out because I think everyone is up to no good. I just did it a little easier instead of cutting the wires I used a jumper wire to connect the wires on the other side of the connector. But thanks to you I knew what wire did what. Because at first I wasn't thinking about shutting it off 😂😂 just getting started
The kill wire is black wire with a white stripe. Leave seperate and touch to the red and black which are spliced together to turn off motor when ready. Thanks for the feedback homie.
THANK YOU THANK YOU THANK YOU!!! Ive spent the past 30+hours googling and searching for an understandable diagram or instructions...luckily I came across your video!! Simple and correct...I have a 2009 jmstar Bali 250cc and the only difference is instead of black w/white stripe I have a brown w/white stripe...
My key cylinder flew out with my keys in it had to backtrack to find it getting sick of starting it with a screwdriver, I bought a three wire before seeing the fourth gonna try making it work thanks for the info.
Yo nice vid big dog. You down here in south Florida? I live in Pompano and used to work in a few motorcycle shops around Boca and I would handle all their scooter repair work. This is the method I would use if I didn't have a key and wanted to make sure the bike was worth saving before I got a whole ignition or new key made. Anyway stay up ride safe no matter what you drive
Hello Ellis can you tell me which ones to connect ? Red with white stripe/ Orange /Black /Blue Genuine Buddy Scooter .also which wires Start and which wires do I touch together to stop 🛑? Thanks in advance Bro
I need some help too yall , got a solana moped previous owner replaced the ignition bwcause he lost the key . Im not getting any electric power when i turn the key making me think there is a wiring issue somewhere . Any suggestions ?
so the info was very useful and appreciated but weren't you supposed to be going and hooking the tv up for your kids? why you just go sit back down? lol
I'll try it later I've lost my key and need to make a switch for the ignition at the moment it's not wired but I use a screw driver in the black box witch is annoying
' HEY ELLIS STALEY " those damn keys hard to keep track of sometimes the're already gone when i get hold of a scooter ' SO " i just go on ebay & for bout $10.00 get new ignition /key cause aint smart enough to follow your instructions " WELL " im from kansas city missouri where the simple folk live ( LOL ) THANKS-MAN-4-GOOD-VIDEO just what is a HOT bike anywey ?
too bad your "mama" can't say she didn't raise any ( FOOLS ) "oh well" you look good in jail clothes & i dont mind keepin yur ole lady happy while you visit the pokey & no you dont spice wires just plug in & start !
My neighbor found a scooter in a ditch with free written on it. No key, busted to pieces and a small bit of the wiring singed in the back, but the engine would turn over. I'm going to try this tomorrow and see if it works. (we've already contacted local authorities to confirm it isn't stolen.)
I cant understand this shyt. When expaining something such as this, Try giving complete instructions. Such as when rewiring, take red wire from ignition and connect to black wire on bike harness etc. I have no idea what wire im connecting to. fuking confusing.
Ok friend. Cut all wires behind the key switch. One red, one black, one green, one black with white stripe. Connect the red and black together. It starts. To stop motor, touch the black with white wire to the spliced red and black wires. Green wire does nothing. Now hit "like" if it helps. Im just curious as to how many people this video helps. Lol because i couldnt find one to help ME. Thats why i figured it out. Good luck.
Your the fucking man!
where did you cut the wires the ignition side or the wiring loom side of the conector cos the conector with the little wire pushed in the side theres no wires got me cofused
so the wiring loom
Ellis Staley .
Your video helped me to not only start my moped but helps to figure out that I had an ignition switch problem all along! Great video! Aloha and Mahalo from Hawaii!!!
Yea I’m 100 percent doing this because I lost the keys
I'm totally not going to do this to get money for tomatos
Thanks a lot!! I lost my set of keys and had my scooter ignition key and I only have the trunk key now. So thanks like you said everyone's a hater and don't want to help anybody out because I think everyone is up to no good. I just did it a little easier instead of cutting the wires I used a jumper wire to connect the wires on the other side of the connector. But thanks to you I knew what wire did what. Because at first I wasn't thinking about shutting it off 😂😂 just getting started
@@mikedee4399 glad to help God bless you friend
I was looking for a video with a blunt in my hand and I find the right teacher with another blunt 😂😂🤣🤣
Thank you Mr. Staley! I'll be trying this on my kid's scooter tomorrow. I wish I could have seen another good close-up of the kill switch though.
The kill wire is black wire with a white stripe. Leave seperate and touch to the red and black which are spliced together to turn off motor when ready. Thanks for the feedback homie.
I love this foo, he's definitely someone's dope ass uncle
THANK YOU THANK YOU THANK YOU!!! Ive spent the past 30+hours googling and searching for an understandable diagram or instructions...luckily I came across your video!! Simple and correct...I have a 2009 jmstar Bali 250cc and the only difference is instead of black w/white stripe I have a brown w/white stripe...
Good job you explained it very carefully you got my vote
Your a bit random, but u solved my problem of no keys, thamkyou
Who is here from London trying to Learn how to do it so they can get free peds (who does road here)
PSYCHO PSYCHO yea g
me
PSYCHO PSYCHO me
PSYCHO PSYCHO lool you don't do road
If you tell people you do road, you don't do road.
Hell yea man ive been lpoking for a video exactly like this thank you
hell yeah man!!!! thx for the feed back
yea bro shit worked perfect. just like u said.
Thanks that helped me take a brand new bike home with me for free u the real mvp
+Ellis Staley I'm joking I was saying his a twat for saying the vid , my dirt bike has been stolen , check the vid out on my Chanel
Thanks for the advice. I just lost my key too and you made this easy to understand. Thanks Ellis
very helpful. had a bad switch.hooked up a toggle switch. works great!!!
My key cylinder flew out with my keys in it had to backtrack to find it getting sick of starting it with a screwdriver, I bought a three wire before seeing the fourth gonna try making it work thanks for the info.
Actually solid video thanks man
hope you doing good in 22 man, thanks uncle.
Yo nice vid big dog. You down here in south Florida? I live in Pompano and used to work in a few motorcycle shops around Boca and I would handle all their scooter repair work. This is the method I would use if I didn't have a key and wanted to make sure the bike was worth saving before I got a whole ignition or new key made. Anyway stay up ride safe no matter what you drive
Thank you!!from augusta ga
Hell yes thank you so much brother thank you
dude i am not kidding but i could actually smell the cigar, that is a rum dipped stoggie, i couldn't tell you the brand.
Hello Ellis can you tell me which ones to connect ? Red with white stripe/ Orange /Black /Blue Genuine Buddy Scooter .also which wires Start and which wires do I touch together to stop 🛑? Thanks in advance Bro
Thanks for that part
thank you man good video
thanks for the feedback sir.
Aye big dawg if i hot wire like yours will my lights still work
I need some help too yall , got a solana moped previous owner replaced the ignition bwcause he lost the key . Im not getting any electric power when i turn the key making me think there is a wiring issue somewhere . Any suggestions ?
All you need is a couple toggle switches and you're all set. 😁
Real shit, thanks 🙏🏼
I'm your Biggest Fan
these scooters are fit for the scrap
Why don't you buy a new set of locks and keys for under $15.00 for all 3 locks and 2 keys
thanks to u i dinged like 5 peds :)
O16 Aaaand ?
What you do with them ?
What model as year were they ?
Yeah.. guessed so.
@@etunimi4206 r/woooosh
LOOOL init bare peds
Listen mate does the front cover require lots of force to take off or is it easy ?
izzy khan it take force
The year 7s won’t be on a scooter no more they’ll be on the back wheel of a ped😂
I got it ranger scooter 250cc I lost my keys and I don't know which wire's to put together now if I send you a photo can you help me???????
Thank you 😊
Yeah bro, i *lost my keys too* 😎😎
thanks i now have 5+ scooters
Hey so if the batter is dead it still want start bto
Trying to look all thuggish an sexy talking about his moped
Lmao!!! Good one!!!
Hahaha
cheers mate much help
"Lost my keys a scooter o two back in the day"
thank you broski
How do I do it with my swing 125cc
so the info was very useful and appreciated but weren't you supposed to be going and hooking the tv up for your kids? why you just go sit back down? lol
😂😂😂😂 I guess you're right about that
I have one red one black one green and one red with white strip when I touch the red and black it sparks and gets hot
Mr T has put on weight
I'll try it later I've lost my key and need to make a switch for the ignition at the moment it's not wired but I use a screw driver in the black box witch is annoying
exactly why I made the video. let me know how it works out.
+Ellis Staley I took an old switch off my printer and put the two wires to a switch
+noberts2k9 dude you made me put on shades because that was BRILLIANT!!!!
' HEY ELLIS STALEY " those damn keys hard to keep track of sometimes the're already gone when i get hold of a scooter ' SO " i just go on ebay & for bout $10.00 get new ignition /key cause aint smart enough to follow your instructions " WELL " im from kansas city missouri where the simple folk live ( LOL ) THANKS-MAN-4-GOOD-VIDEO just what is a HOT bike anywey ?
too bad your "mama" can't say she didn't raise any ( FOOLS ) "oh well" you look good in jail clothes & i dont mind keepin yur ole lady happy while you visit the pokey & no you dont spice wires just plug in & start !
+Chad Simmons sounds like your wife.
yep were both "from the hood" & i hope were "all good" glad to meetcha ellis
+Chad Simmons not as glad as your wife is.
She prays you get a super fast acting cancer. That's why she keeps you with plenty of smokes. Smoke up buddy.
Can I ask ua questions
ok thanks i ain't getting spark to the plug chking the ignition coil
Leave a comment if this is helpful
Also PLEASE HIT THE LIKE AND SUBSCRIBE!!!!
+Ellis Staley worked man
+Jacki z thanks for the feedback!
My neighbor found a scooter in a ditch with free written on it. No key, busted to pieces and a small bit of the wiring singed in the back, but the engine would turn over. I'm going to try this tomorrow and see if it works. (we've already contacted local authorities to confirm it isn't stolen.)
Ellis Staley Was that even English?
Ellis Staley aint that true
Thanks!
Make a brand video with Better quality
This is my type of video
Does is work with a Honda ps 125
Good job now help lil homie.
Update from 5min ago.
Thanks now I instantly need a fuse. Black and Red yeah rt
Thanks, you aren't the only one who red and black. THANKS. Instantly need a fuse. Thanks a lot
@@deadmic5037did blow my fuse too so this not working
will all the lights and turn signals still work
yes
mine dont and the only thing that works is the bright lights no brake lights no turn signals and no horn
can u tell me what wires go together and is there any way to make it faster
+jason smith you mean AFTER hotwiring?
yes
scooter has kick start lever and no battery...guessing this wont work?
Thats exactly the situation it will work in
for that your gon need to just bypass the key. hella easier
Riley Pilot yeah I figured it out thanks
could of just took the tumblers out of the ignition and then you wouldn't have to cut or splice anything
Could you put in toggle switches to the kill switch and the starting wires?
BTW, asking because I'm about to buy a scooter that was abandoned at a landlords property. They never came to get it.
Yes u can
he said sexy huh SIKE
ok I have a Yamaha w brown red black grey how do I do this w those
Mary Thornton red to red and black to black. Once running try each of other wires one by one to see which kills it. Good luck to you.
ty very much
Who’s here from manny tryna chief a ped😂😂
Yo bro did u got it does it work its so confusing could u tey explain me?
Bo2 And Mw2 Trickshot Hub yes brudda bare peds
Taufik El Farjani just do what he says its all just wires just get a angle grinder n some discs n cut that lock off n do what this guy says
thank you
Bro all you had to do was in plug the ignition and touch the ignition thingy with a screw driver
Chriss Td Up wym plug teh Ignition like plug it wit da screw driver?
i dont have the green one i have black and red.
GigantGaming twist black and red together
Lmao 🤣 🤣 🤣
I cant understand this shyt. When expaining something such as this, Try giving complete instructions. Such as when rewiring, take red wire from ignition and connect to black wire on bike harness etc. I have no idea what wire im connecting to. fuking confusing.
Go get an education Simon
I couldn't understand this shit
Because you're a fucktard.
Ii me
Its people like this teaching theifs how to steal 😠😠😠😠
stfu
Welcome to 2020 wide wide web . Stolen mopeds should be your least concern ..