That's way way cool👍🏽 I thought about making a balancing man with these metal bearings I have out of metal? I like to weld thing's up that have moving parts and let people interact with my art sculptures if people want to call it that. I usually make my stuff out of scrap metal.
@@2muchsawdust yes I need to get a better video camera to record making stuff, with my phone all I would be able to do is record finished product of maybe 4 to 5 minutes? With a go pro I could record longer video's. You are right I do need to make video's of my art work I made from welding. I have been saving a lot o odds and ends metal that I'm going to make little art project's. Might as well start now Christmas is in a few month's. I'll have something to give away.
Back in the 1950s the barber shop I went to in Detroit had a little guy on a bike that would go back and forth by itself on a line clear across the shop. I don't know if it had a motor or if the line was raised and lowered some way.
Hmm. If you were to attach that one end of the string to a whiligig wheel, then the wind would cause it to move the string up and down. Just a thought.
Good work that's worth watching and sharing Please Can u explain the mathematical formula u made for leg and thigh cuz it's not clear in thé vidéo. Thanks
All you need to know is the distance from the hip pivot point to the pedal at its lowest rotation point. Once you have that distance you make the lower and upper leg lengths appropriately. The total length of the leg must be slightly longer than pedal to hip distance. Imagine riding a bicycle that’s too big for someone, or riding a bike that is too small. You either can’t reach the pedals with your feet or your knee hit the handlebars. Hope this helps.
Hi! I love the toy! Do you know if I could get it or buy it anywhere? My dad is a Physics teacher at University and would like the toy to show a few concepts to his students😊
I don’t have any plans on paper. As you see in the video I just made it up as I went along. I will give some rough measurements: 10-11” tall, 3” dia. Wheel.
The little guy is about 10 inches tall. The wheel diameter is 3 inches. Things like this I don’t measure everything, I just guess. Happy woodworking to you.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
That is so cute! I used to watch Roy's show back in the 80's, so fun!
Carinissimo !!!
E come sa anche pedalare in retromarcia !!!
Complimenti !!!
I don't always watch Roy, but when I do, something cool always seems to be coming out of my shop . My grandson is gonna love it.❤
i have ALWAYS loved watch the woodwright's shop. thank you for this video!!
SELVA!
Saudações ATLETICANAS!
Amazing! Beautiful work! And that!
That was a blast from the past thanks
Excellent build..!
Great job!
Very cool ...I'm going to give it a shot 😊
Amazing job!!! Congratulations from Argentina 😊
Cute little toy!👍👍👍
What a great toy from the past. I'm adding this to my to-do list.
😂beautiful toy.pozdrav from Slovenija.
Increible! Maravilloso trabajo! Felicitaciones y un Saludo desde argentina
Perfectly! A real master! My respect to you!👍
WOW!!! awesome toy!!! thank you!!!
Brilliant! 👍🏻
Excellent, Congratulations.
great job!
Muy buen trabajo felicitaciones desde Uruguay
Very nice work.
Good job. I like it. Good luck
Thank you very much
Good work ❤
Muito legal a idéia, parece que o boneco realmente está pedalando 😊. Parabéns
That's way way cool👍🏽
I thought about making a balancing man with these metal bearings I have out of metal? I like to weld thing's up that have moving parts and let people interact with my art sculptures if people want to call it that. I usually make my stuff out of scrap metal.
I would love to see your creation. Good luck
@@2muchsawdust yes I need to get a better video camera to record making stuff, with my phone all I would be able to do is record finished product of maybe 4 to 5 minutes? With a go pro I could record longer video's. You are right I do need to make video's of my art work I made from welding. I have been saving a lot o odds and ends metal that I'm going to make little art project's. Might as well start now Christmas is in a few month's. I'll have something to give away.
Bsck in the 50's one of the tv stations in the Phila. area used one these to bring out the weather for the day,it was called Elmo with the weather😊
love it well made
Very clever!
Wouw,fantastic creatives
Engenhoso , muito bom , parabéns 🎊
Back in the 1950s the barber shop I went to in Detroit had a little guy on a bike that would go back and forth by itself on a line clear across the shop. I don't know if it had a motor or if the line was raised and lowered some way.
I’ve seen them on string tied tied to the door, so every time the door opened and closed the little bike goes back and forth.
Parabéns, grande profissional , abraço aqui do Brasil 😉👍🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Maravilloso, gracias por compartir,
Puede compartir los planos?
Gracias nuevamente
Excelente... donde puedo conseguir mas ideas.... o planos.... felicitaciones... desde Antofagasta, Chile
Hmm. If you were to attach that one end of the string to a whiligig wheel, then the wind would cause it to move the string up and down. Just a thought.
Your activity is an admirable and joyful voiage to chilhood , congratulation
🇺🇦 ВАУ !!! Ну ти як папа Карло. І Буратіно.
👍👍👍👍👍👍
Отличная игрушка, спасибо! В детстве, был такой кот, на колесе. Хвост трубой, шляпа, и усы.))
Это шедевр!!!
Amazing
É show de bola é só sucesso parabéns pela sua dicas muito legal parabéns mesmo ficou muito legal
Прикольная игрушка!
Muito bom parabéns nota 10000000❤❤❤❤❤❤
Good work that's worth watching and sharing
Please Can u explain the mathematical formula u made for leg and thigh cuz it's not clear in thé vidéo.
Thanks
All you need to know is the distance from the hip pivot point to the pedal at its lowest rotation point. Once you have that distance you make the lower and upper leg lengths appropriately. The total length of the leg must be slightly longer than pedal to hip distance. Imagine riding a bicycle that’s too big for someone, or riding a bike that is too small. You either can’t reach the pedals with your feet or your knee hit the handlebars. Hope this helps.
Excelente gostei parabéns 👏👏
Ого, вот это тема.))))))))))
Nice!
Funcionou perfeitamente gostei
Hi! I love the toy! Do you know if I could get it or buy it anywhere? My dad is a Physics teacher at University and would like the toy to show a few concepts to his students😊
@@migueljimenez8337 I have never seen one for sale.
Nice
Are plans available?
I don’t have any plans on paper. As you see in the video I just made it up as I went along. I will give some rough measurements: 10-11” tall, 3” dia. Wheel.
Top das Califórnia gostei
Очень милая игрушка
Excente! Gracias!
Kamala and Linda Burney,
Lydia would almost make
a threeway first place,
but it'd be close, photo finish.
Hi!!!! Como faço para obter o molde do equilibrista?
Прикольная штука, но так как всё вручную, каждая игружка индивидуальная, а значит, дорогая. Можно делать в цветах города или штата - как сувенир.
สุดยอดครับ
Esses bonecos e da hora
👍👍👍
Show gostei
Muito legal gostei
🇮🇩🇮🇩🇮🇩👍👍👍👍👍👍👍👍👍
Que legal
😂😂😂 👏👏👏 💖💖💖...!
😄😄👍
💯💯💯💯💯💯👍🤝
👉💯👍
Onde conseguir o tutorial
Salam,,,sayang tidak tertulis ukuran,satu persatu jadi tidak bisa meniru,harusnya kasih.salam kreatif sangat super sekali,saya suka.
The little guy is about 10 inches tall. The wheel diameter is 3 inches. Things like this I don’t measure everything, I just guess. Happy woodworking to you.
Tempelet?
I didn’t use a template. Hardly ever do unless I am making multiples.
يتعذر التعلق لا أعلم .
Интересны только последние 15 секунд.
🍪
you wasted all that time making the main wheel - it would have been simpler to use the lathe that you use to make the top hat .............. ???
You are probably right. I think if I make another, I’ll try and make the body on the lathe as well.
That didn’t take that long to file that wheel groove.
I cannot get the metal rod in the wheel not to spin
Что это еще за дроби?? Выглядит, как издевательство. Попроще нельзя было?
I filmed this for my middle school students. The fractions were trying to convey the length of the legs segments.
Good thing you're not God.........trial and error creationism???????????
Nice
Nice!