You got a sub from me for the jasno x50 mods. Not many people making videos on it. Putting some 3 inch tires on the rims would be an interesting video, something I'm thinking about doing to it
@@BRichSolution Better range and hopefully also better handling on roads and gravel. I might only go down to 3.5, the suspension might feel pretty rough if you go much smaller
B Rich, thank you for this super helpful video. I purchased a Jansno x50 back in August, 2023. It is the older model that doesn't have a key lock on the throttle. Recently the wire harness melted and now the bike is in the shop awaiting a new controller, motor, and the newer locking throttle. I recently acquired a Bafang 48v 17 Amp battery that I would like to add as an extra battery. Will the newer controller have the right connectors to work with the battery pack balancer you used in the video?.
I did this install on my happyrun g50, but after a few months the secondary battery will not give any power to the bike. Original battery is running through the parallel combiner fine. Tried swapping out the inline switch but still no power from second battery. Battery shows fully charged when plugged into charger. Any thoughts? Is it worth trying a new(possibly better) battery combiner? Is it even possible that one lead burnt out but the other is fine? Or is my second battery just a brick? Any help/insight would be much appreciated. Thank you for your time
Sounds like battery combiner is burnt out. Try pluging in extra battery to factory controller bypassing the combiner to prove battery is okay and combiner is bad
@@BRichSolution thank you I will have to give that a try on my day off this week. Very hopeful it's just the combiner and not the battery lol. Have a great day man!
Hi, i'm french and discover your channel ! Good job ! I need upgrade my jansno x50 but you use a second battery of 10Ah, i need install a battery of 40Ah, u think it's possible for compatibility with the manufactury battery ? Thanks 💪
Yes, any size 48V battery can be combined with the factory battery 10Ah or 20Ah or 40Ah. The challenge with the 40ah battery will be where the mount it on the frame? Also 40Ah battery will add 8kg of weight
So I was wondering why you didn't get two factory batteries instead of aftermarket It's funny I was talking about this a lot to a few friends but with two of the same battery Also whats the range ?
No where to mount the second factory battery; the mount is too big. Range with 10ah gives me extra 13 miles or 20km full throttle no pedaling longer mixed ridings
B6 is cool bile but priced for high at $1200-$1300 you can get a lot of other bikes for less. Ridstar Q20 with 20Ah battery peaks 1500w and longer rides then b6
hard to find a rack that will work with full suspension but link to this cargo rack should work and bolt onto the frame: s.click.aliexpress.com/e/_DBbK4Cr I will post video of cargo bag Monday that work
Hey rich, but in order to remove the extra battery (to recharge) you will need to remove the seats, then unplug and undo the straps. A battery base could have been a good idea right ?
Can I use a 40amp battery combiner ? Instead of the 30amp? I bought a 20ah hailong battery a little bigger than yours and the toggle switch - I accidentally ordered the 40amp? Will it work and be ok to use?
I was going to do the same thing but we can't get that battery in Canada unfortunately. I just bought the 17amp battery and keep the 14amp battery in a backpack as it's light. I guess I could order something similar from China but I don't want my ass burnt from thermal runaway on a battery from the Ho Chi Mihn trail....
Here are links to buy the battery and combiner via internationally 48V 15Ah Battery: s.click.aliexpress.com/e/_DDfI3Nl Link to 30A Battery Combiner: s.click.aliexpress.com/e/_DdJxKQx Link to inline switch: s.click.aliexpress.com/e/_DCi8oBl
Switch allows you to give one battery a rest and chemistry to level load the cells. Also you have better idea of range when stock battery is down to one 1-2 bars you know its time to turn around
Xt60 connector. It would be difficult to mount another hardshell battery on Jansno x50 frame as there is bot a space and single tube would not be stable
bro I'm planning to add batteries it is possible to combine stock (48v14ah) + new battery (48v 20ah) what switch balancer i can choose 30A or 40A? Thank you in advance!
30a combiner is sufficient 48v / 20ah will be hard to package under the seat. The 15ah version will fit and with stock battery give you over 50 miles if throttle only range at 28mph
@@BRichSolution thank you bro rich. I’m planning to look some welding shop and make a plate more stable and i know the weight of my bike would be sacrifice.
See links in the description below the video or here Link to products used: www.amazon.com/shop/brich/list/2F841N8TMSTOD?ref_=cm_sw_r_apin_aipsflist_aipsfbrich_TP7W7EPC69117EQ0BA2Z_3&language=en_US
Man I'm so glad you're making content on this bike! I'm about to buy one and mod it.
You will enjoy it
I just recently purchased the same bike as my first E Bike, would you be able to let me know where to purchase the backup battery?
You got a sub from me for the jasno x50 mods. Not many people making videos on it. Putting some 3 inch tires on the rims would be an interesting video, something I'm thinking about doing to it
I will have more Jansno X50 upgrade content in coming weeks. Why go to narrower tire? Try to increase range?
@@BRichSolution Better range and hopefully also better handling on roads and gravel. I might only go down to 3.5, the suspension might feel pretty rough if you go much smaller
@BRichSolution which combiner do I need if I have the 14 and 17 ah batteries from jansno?
Hey man, awesome upgrade. Do you think the larger 15Ah or 20Ah batteries would fit in that space ?
15ah soft shell battery will fit see link to battery amzn.to/4aNQuIl but 20ah would be tight
That's genius thanks B Rich!
Glad i can help other owners out
im thinking of side by side dual jansno batterys on the same mounting plate (2 plates)!14 Ahand 17Ah ....so 48v 31Ah! ...on l'fait 🤨
Interesting solutions if you can package it
B Rich, thank you for this super helpful video. I purchased a Jansno x50 back in August, 2023. It is the older model that doesn't have a key lock on the throttle. Recently the wire harness melted and now the bike is in the shop awaiting a new controller, motor, and the newer locking throttle. I recently acquired a Bafang 48v 17 Amp battery that I would like to add as an extra battery. Will the newer controller have the right connectors to work with the battery pack balancer you used in the video?.
yes newer controller should have XT60 connections and the battery combiner will work. make sure to buy 30A battery combiner
I did this install on my happyrun g50, but after a few months the secondary battery will not give any power to the bike. Original battery is running through the parallel combiner fine. Tried swapping out the inline switch but still no power from second battery. Battery shows fully charged when plugged into charger. Any thoughts? Is it worth trying a new(possibly better) battery combiner? Is it even possible that one lead burnt out but the other is fine? Or is my second battery just a brick? Any help/insight would be much appreciated. Thank you for your time
Sounds like battery combiner is burnt out. Try pluging in extra battery to factory controller bypassing the combiner to prove battery is okay and combiner is bad
@@BRichSolution thank you I will have to give that a try on my day off this week. Very hopeful it's just the combiner and not the battery lol. Have a great day man!
Hi, i'm french and discover your channel ! Good job ! I need upgrade my jansno x50 but you use a second battery of 10Ah, i need install a battery of 40Ah, u think it's possible for compatibility with the manufactury battery ? Thanks 💪
Yes, any size 48V battery can be combined with the factory battery 10Ah or 20Ah or 40Ah. The challenge with the 40ah battery will be where the mount it on the frame? Also 40Ah battery will add 8kg of weight
@@BRichSolution Thanks, i will install the battery DIY on the top, so no problem for me 👌
I have the same bike as well...
Excellent review!
Where did you find/buy the extra battery and additional harness/wiring?..
See link for all the parts to add extra battery amzn.to/4aNQuIl
So I was wondering why you didn't get two factory batteries instead of aftermarket
It's funny I was talking about this a lot to a few friends but with two of the same battery
Also whats the range ?
No where to mount the second factory battery; the mount is too big. Range with 10ah gives me extra 13 miles or 20km full throttle no pedaling longer mixed ridings
Will this also work with the bigger 48v 15ah battery by the same company?
Yes it will work with the larger 15ah battery
U need check, new moped E-bike: Hidoes B6!!
Cheap, nice frame and red color and 1200w motor with 1500w peak power
B6 is cool bile but priced for high at $1200-$1300 you can get a lot of other bikes for less. Ridstar Q20 with 20Ah battery peaks 1500w and longer rides then b6
@@BRichSolution yeah but this bike is very high, nice frame and color + in my country worth around $1050
In Poland + 1200w nominal
Hi bro, could you tell me a link for a battery charger (for Europe) from Aliexpress that is compatible with the Jansno X50? Best regards
You want 48V 2A or 3A ebike charger with 5.5mm DC plug see aliexpress ad s.click.aliexpress.com/e/_msBO7ao
Very interesting video. I have the same bike.
Right on
Hello mr. B rich, can you please help me to find a good and proper rear rack for my ebike ridstar Q20, thank you in advance
hard to find a rack that will work with full suspension but link to this cargo rack should work and bolt onto the frame: s.click.aliexpress.com/e/_DBbK4Cr I will post video of cargo bag Monday that work
Hey rich, but in order to remove the extra battery (to recharge) you will need to remove the seats, then unplug and undo the straps. A battery base could have been a good idea right ?
Charge in place or remove battery from pouch and disconnect xt60 connection
Can I use a 40amp battery combiner ? Instead of the 30amp? I bought a 20ah hailong battery a little bigger than yours and the toggle switch - I accidentally ordered the 40amp? Will it work and be ok to use?
Ya 40amp combiner will work too
Awesome - thank you for the quick response
I was going to do the same thing but we can't get that battery in Canada unfortunately. I just bought the 17amp battery and keep the 14amp battery in a backpack as it's light. I guess I could order something similar from China but I don't want my ass burnt from thermal runaway on a battery from the Ho Chi Mihn trail....
Here are links to buy the battery and combiner via internationally
48V 15Ah Battery: s.click.aliexpress.com/e/_DDfI3Nl
Link to 30A Battery Combiner: s.click.aliexpress.com/e/_DdJxKQx
Link to inline switch: s.click.aliexpress.com/e/_DCi8oBl
@@BRichSolution Thanks.
does the switch not limit your overall range? Load on two batteries is much less than one.
Switch allows you to give one battery a rest and chemistry to level load the cells. Also you have better idea of range when stock battery is down to one 1-2 bars you know its time to turn around
did you ever consider drilling into the top frame and just installing a regular battery?
I did but single tube the battery mount would not be stable
Battery not available inn uk, what other could work thanks, just subscribe.
How about the aliexpress link is that available in UK s.click.aliexpress.com/e/_DDfI3Nl
How much range would I get if I’m going an average speed of 20mph or 28mph with the extra battery installed. Thanks
20 mph with extra battery on flat ground throttle only should get 50 miles or more
Does this also give the bike more speed? If so how much? And if not what’s something u could do to give it more speed to at-least high 30
Not more speed but the top speed last long with 2nd battery it does not slow down after 20 miles i can ride over 32 miles before speed is impacted
Hey Rich..Will this process work also on a dual motor/controller?
Yes same process
Cna the controller of this bike handle a 52V battery?
I am not sure it can handle 52V. Most can
what type of connector is the battery base? Can you upgrade with another battery that is compatible?
Xt60 connector. It would be difficult to mount another hardshell battery on Jansno x50 frame as there is bot a space and single tube would not be stable
Where can I get those fenders? My rear one was flimsy and fell off.
Aliexpress see link s.click.aliexpress.com/e/_mMclhCK
@@BRichSolution out of stock😖
dzień dobry, czy możesz zmierzyć wysokość od podłogi do siodełka i od pedałów do siodełka?
72cm from seat to pedal in down position
@BRichSolution if i have the stock 14 and aftermarket 17ah batteries from jansno what size combiner do i need?
Buy the 30A combiner
Is there still space for the license place holder?
After the battery is installed
Yes, battery is in front of lic plate bracket
The battery link is not working anymore, can you provide another link sir?
Thank you can try this link amzn.to/3zCNil9
@@BRichSolution Does it matter which V variant you buy? I see 36-52V
bro I'm planning to add batteries it is possible to combine stock (48v14ah) + new battery (48v 20ah) what switch balancer i can choose 30A or 40A? Thank you in advance!
sorry for the questions i'll try to get the same on your set-up but the link of the products are not available here in Italy. Thanks again!
30a combiner is sufficient
48v / 20ah will be hard to package under the seat. The 15ah version will fit and with stock battery give you over 50 miles if throttle only range at 28mph
@@BRichSolution thank you bro rich. I’m planning to look some welding shop and make a plate more stable and i know the weight of my bike would be sacrifice.
Where can I get the extra BA pack
See links in the description below the video or here
Link to products used: www.amazon.com/shop/brich/list/2F841N8TMSTOD?ref_=cm_sw_r_apin_aipsflist_aipsfbrich_TP7W7EPC69117EQ0BA2Z_3&language=en_US
Will this setup work on the first x50 model? I’m unable to check the wiring if it’s plug & play like yours.
Yea it works in all the x50s
Just updating. Older model uses T-plug connectors. An adapter T-plug to XT60 connector will be needed for this setup
Will you upgrade the brakes?
Will do this weekend
What size balancer?
30a
Where can I buy that at?
All parts listed in description under the video
How much do you weigh? Looking to do a 48v razor
170lbs