Yea video helped me out was going to get -24 but I figure it won’t be enough poke that I’m hoping for but after seeing yours I’ve decided to go with -44 truck looks good man thanks for the help
Truck looks really nice with your wheel/tire set up. I'm going back and forth on what kind of kit to get for my truck. I have a 2015 XLT CCSB 2WD, first truck I've ever owned. I had a 2005 Crown Vic for the previous 8 years so jumping into a truck is new to me. I want a 2.5 level up front but I keep coming back to the MaxTrac 4.5 spindle lift kit. Plus I still want my truck to fit in my garage too. And I saw the TX plates, I'm in the Dallas area if you have a shop to recommend.
Yea with a 2WD the spindle lift would be the easiest way to do it. A 4 inch would be what I wish I did. I had my level put on at the dealer and I did the rest myself.
Great video man ! I took off my front crash bar and that front arrow spliter thing on the bottom front and trimmed plastic and took off mud flaps ... But im rubbing on what ever that plastic part on the rear of the wheel well I ssit want to cut into it bc afraid of fucking it dramatically hahahah...im running a 2.5 leaving kit imm deal with the rubbing till I can upgrade to a 4 inch lift
would i have to trim the fender trim piece that comes on the f150 sport? i wanna keep the look of the entire wheel well stuff but idc about cutting all the stuff inside. you think I could still fit 12 wides?
Thanks bro what size tires do you think you could run without rubbing my trucks black so that offset would kill me lol I’m debating on going with a level or a 4 inch lift. Also do you recommend the headlights swap ?
Just bought some 20x10x -12 1:04 paired with Toyo Rt Trails. 33 12.5 . I'm not adding any struts . I don't ever plan on off-roading. Any regrets going this wide?
Do you ever get rocks trapped in the lip of your wheel causing scratches on the wheel (that is the one thing I am worried about before I buy new wheels because I drive on gravel every day)
Not that I’ve noticed before. It’s mostly just dust and dirt that get on the lip, and the only time mud has gotten stuck in them is when I actually kinda buried it. Just make sure you don’t have stretched tires and you should be alright
I’m in the same process, just put 22” tis 554 with 33” on 2.5” level kit on my 19 f150. Debating cutting crash bar or just removing it so I can pop it back in if needed down the road.
They’ll will probably poke out a little bit more than mine. I’m not sure how noticeable it will be. I believe the number is in millimeters but don’t quote me on that
Perfect example of what NOT TO DO! Not only does it look like raw shit, it's unsafe... Just get the right lift kit and do it RIGHT the first time instead of being an moron!
@@WyattWilliams7 well since its a truck RUclips page dude keep it all truck stuff. Maybe like best beginner mods or best beginner trucks or like what mods not to do or like how tos maybe
I had to stop watching half way through. To each their own and I’m glad you love what you did, but hell no am I chopping the hell out of my truck, compromising the safety and structure, just to put bigger tires on it. 🤦🏽♂️
Yea if I did it again I would’ve gone with a bigger lift, but that’s why I made the video because I’ve had a lot of questions on how to make this set up work
Thanks for all the detail, appreciated bro.... nice setup too 👌
Thank you!
Yea video helped me out was going to get -24 but I figure it won’t be enough poke that I’m hoping for but after seeing yours I’ve decided to go with -44 truck looks good man thanks for the help
Yea my old truck I had -24 and I wanted more this time around lol
Thanks for the video👌🏽 everything i wanted to know abt puttin wider wheels on my f150. Looks clean too
Just want ask your headlight did you connected the fuse? Coz I got same headlight. Diffuse connect it’s really confuse me
Truck looks really nice with your wheel/tire set up. I'm going back and forth on what kind of kit to get for my truck. I have a 2015 XLT CCSB 2WD, first truck I've ever owned. I had a 2005 Crown Vic for the previous 8 years so jumping into a truck is new to me. I want a 2.5 level up front but I keep coming back to the MaxTrac 4.5 spindle lift kit. Plus I still want my truck to fit in my garage too. And I saw the TX plates, I'm in the Dallas area if you have a shop to recommend.
Yea with a 2WD the spindle lift would be the easiest way to do it. A 4 inch would be what I wish I did. I had my level put on at the dealer and I did the rest myself.
How much cutting do you think I will have to do if I install 20x12 -44 offset rims with 37s on a 6.5 in lift in a f150
Probably a decent amount depending on the year. I’ve seen some guys run 35s with that setup and have to trim but I’m sure it can be done
Great video man ! I took off my front crash bar and that front arrow spliter thing on the bottom front and trimmed plastic and took off mud flaps ...
But im rubbing on what ever that plastic part on the rear of the wheel well I ssit want to cut into it bc afraid of fucking it dramatically hahahah...im running a 2.5 leaving kit imm deal with the rubbing till I can upgrade to a 4 inch lift
would i have to trim the fender trim piece that comes on the f150 sport? i wanna keep the look of the entire wheel well stuff but idc about cutting all the stuff inside. you think I could still fit 12 wides?
The fender flare? I’m not sure but you might be able to sneak by or trim a little at the bottom
Thanks bro what size tires do you think you could run without rubbing my trucks black so that offset would kill me lol I’m debating on going with a level or a 4 inch lift. Also do you recommend the headlights swap ?
A 4 inch would help a lot on my setup but 33s on positive offset wheels you’d probably be good, and I love the headlights
I got 33.5 on my 2019 f150. No rub at all.
How much mpg you lose? Any difference after the leveling kit installed?
I lost about 3 mpg
Just bought some 20x10x -12 1:04 paired with Toyo Rt Trails. 33 12.5 . I'm not adding any struts . I don't ever plan on off-roading. Any regrets going this wide?
I love the wide look, but it will make the truck get dirty pretty easy lol
Very helpful thank you dude. Astonishing that these have a 44 inch offset tho that’s bananas
This is why u don’t buy used lifted trucks lol. Messy as hell
I’ve thought about buying a new truck because of what I’ve learned lol definitely would do things differently
Where did you get the Ford oval emblems? Are they just vinyl overlays? They match the truck very well. I have an ingot silver, too.
I got them from isfpcustomemblems on Instagram and yes they are stick on
Do you ever get rocks trapped in the lip of your wheel causing scratches on the wheel (that is the one thing I am worried about before I buy new wheels because I drive on gravel every day)
Not that I’ve noticed before. It’s mostly just dust and dirt that get on the lip, and the only time mud has gotten stuck in them is when I actually kinda buried it. Just make sure you don’t have stretched tires and you should be alright
Where you buy your lights from
I’m in the same process, just put 22” tis 554 with 33” on 2.5” level kit on my 19 f150. Debating cutting crash bar or just removing it so I can pop it back in if needed down the road.
Yea removing is probably the best bet but I think the bumper has to come off
I just bought some wheels with -51 offset, so does that mean my wheels will stick out more? That poke on your wheels is good enough for me lol
They’ll will probably poke out a little bit more than mine. I’m not sure how noticeable it will be. I believe the number is in millimeters but don’t quote me on that
Wondering if I put a 3 inch level would they still rub as bad
It would help for sure but I think a 4 inch would be ideal for less rubbing but then it starts to get kinda tall for 33s
The trimming would probably be able to be done cleaner on the rear with a little more night
Think with more trimming with your wheel setup and running 35’s for tires it can work? Good detailed info 👍
I think I may have to cut into the fender more to get 35s to fit with this offset, but I’m sure someone’s done it lol
I’ve done it and its a lot of cutting lol but looks sick 🔥🔥🔥
When you put big wheels,?do you need change TPMS sensor? Thank you
What offset are your wheels?
-24 I think
Actually -44 now that I think about it lol
Perfect example of what NOT TO DO! Not only does it look like raw shit, it's unsafe... Just get the right lift kit and do it RIGHT the first time instead of being an moron!
What brand is the 2.5 level
I forget. Dealer install, but it’s just a puck level
Brand doesn't matter on a leveling kit it's just a spacer I got mine on ebay or Amazon for like 40$
damn bro you shoulda kept posting your channel was going to be big!
Yea I wanted to keep it going but I didn’t know what to post, I have some ideas, you may have given me some motivation lol
@@WyattWilliams7 well since its a truck RUclips page dude keep it all truck stuff. Maybe like best beginner mods or best beginner trucks or like what mods not to do or like how tos maybe
@@musselmanmedia5236 yea those videos have done the best for me, I’ll think of some videos to do here soon, thanks for the input!
Bro we literally have the same lights and tails and I’m putting 24x12 on a 2.5 level with 33s on 😭
Hell yea, should be a clean truck!
Good video brother. I had to do the same trimming to mine as well. Click my pic to see my trim job some time.
Keep the videos coming.👍
Awesome, I’ll check yours out!
I had to stop watching half way through. To each their own and I’m glad you love what you did, but hell no am I chopping the hell out of my truck, compromising the safety and structure, just to put bigger tires on it. 🤦🏽♂️
Yea if I did it again I would’ve gone with a bigger lift, but that’s why I made the video because I’ve had a lot of questions on how to make this set up work
Boomer
Can you make a video showing more of the cuts you made on the back side of the wheel wells (the white box)?
I’ll try to get some more clips of that soon