I Tested Your Fingerboard Hacks…
HTML-код
- Опубликовано: 15 июл 2023
- #fingerboard #TheGripsion #discord
Shop Gripsion: shopgripsion.com/
Be part of the next video by joining the Discord👇
Discord Server Here: / discord
Gripsion Fingerboards HERE!
➡️ gripsionfingerboards.com/shop ⬅️
Road to 200k subscribers! Let's GO!!!!
[ Business Inquiry ]
Email: thegripsion@gmail.com
-----------------------------------------------------------
[ Follow TheGripsion ]
Tiktok: @alexpickering
Facebook: / thegripsion
Twitter: / gripsion
Instagram: / thegripsion
Instagram: / gripsionfingerboards
Website: gripsionfingerboards.com/
-----------------------------------------------------------
Music License: www.epidemicsound.com
-----------------------------------------------------------
Thank you for the support guys!!! ^_^ 
Развлечения
And they mean taking a tech deck and heating up the plastic board and bending the angle of the kick steeper for more pop
Yep
Yeahh only works for plastic boards ….you can tell his age from not knowing 🤣🙏✌️
@@theghostface5905 who?
I came here to say thus exact thing lol works with plastic tech decks 😆 I did this when I was a kid for sure but only gave mine a slight bend to much and jt looked weird 😅
@@meka21customs yea
The best thing I've used for applying foam grip tape is using 250 grit sandpaper because it can shape to the side of the board and make a nice bevel. It can also be used on the surface of the tape to wear it in a bit
Use shrink tube over wheels for grip
cheerios as budget wheels is my favorite
Cheerios and resin?
Lock nut needs a retry with a proper tool!
For the tape on your grinding ledge trick use painters tape for a more slidey feel (perhaps.)
I've been doing the tape Scotch tape to make an obstacle slide better for years
8:31 I cannot believe my hack made it in! I should have been a bit more specific, it works better with plastic wheels to give them more grip. Thanks fire including mine! I love your content!!!
i love this video - it helped me in so many different ways, thank you!
love ur vids
You can also use the rubber things in water bottle caps that keep pressure in as bushings
Thanks for including my hack at 10:04 in the video, lol.
With the water ballon bushings, me and my friend were playing with water balloons and we used the rubber bands for bushings and they work so good.
Are you the one who was in the vid
@@JustNolanYT No it was just a coincidence
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
The rubber band water balloon bushings are the only bushing I usually use and if you use a pop it and a hole puncher it makes good bushings and you can do that for Lego tires and a hole puncher they all work
The king always with the vids!!
People be out here paying more money for a finger board than an actual skateboard like wtf
no one asked for your opinion, Bro. Why can't you be just nice. like wtf
Hell yeah, my wife seen these finger skills and blushed.
Dude, I bet you can't even kickflip
R.I.P for the fingerboard 9:06
Love your vids ❤
Banger video Alex. Keep it up!!
Amazing video love it
Great video bro, I’ve never really delved into this rabbit hole. But it looks very interesting. I wonder if there’s anyone that’s tried with their feet!?!
No it’s only for fingers (jk)
For the heated tail you had to heat it up then bend it by pushing it on a hard object and it gives better pop
I think they mean putting wax on tech deck wheels for more grip
love your vid
The method I use to remove grip is… the pinch and pull slowly
Hey @TheGripsion I really enjoyed the video but I think the person with the "hack" :heat up the board for better pop meant heat up a Teck Deck and bend the tail more up to have a bigger pop
For keeping tech deck nuts on just put a really small drop of super glue on after putting the nut on
the deck heat up trick is for plastic tech decks. Back in my day, we would heat up the tail and nose so we can bend them, let them cool, and now you have higher kicks
Your so lucky to have such good beater boards and expensive trucks, im still using My First wooden board that is 32mm and really bad with not responsive trucks and non bearing wheels🙂 i love your videos! Keep it up❤
get your money up
I love the video ot was so good andni will use these hacks for my fingerboards
If you use a foam sandpaper block with velcro attaching sandpaperpads you can get a nice perfect clean griptape edge and in nice single fluid strokes around the deck in a downward slight angle motion with even force and you will get the perfect edge.
bro didn’t test my budget wheels jack 😭
The one that told you to use rubbing alcohol at the end of the video. Yuh that's my friend...i was absolutely astonished!
you should try to master the nolly heelflip in your next vid
this guy sounds like Aceu from Apex Legends lmao
The deck go fare 😅
9:04 Alex, it needs to be a tech deck, and you bend the tail or nose of the deck to make it higher
The guy means that u can bend the tail of a PLASTIC tech deck with fire 🔥
Use tech deck bushings as pivit cups
Same
I never thought my fingers would ever get sore
I use nail polish on the wheels to get grip
8:09
I use the waterbloon one
Can someone help me like bruh.. alright so the problem is whenever i put masking tape on my grip tape, the griptape has some of these random lines that the masking tape took..
try using a balloon as bushings
Yeah
"griptape is actually pretty easy to get off without using some sort of method....." wtf lol. so how???
Lol just leave your deck in the sun for 2 hrs grip! 😂
The heating up your board hack does work because then you can kind of bend the tail for more pop
You need a plastic deck, though
Can anyone tell me what trucks he has on his main setup
The heating of the board was to heat plastic board and bend it for more steep pop
You can flush your deck down the toilet to have no deck
I’ve been using the rubber band bushings for 2-3 years
Where can I get the 5 dollar inverted fingerboard trucks
💜💙💕
Put in the hot water and put in the cold water then leave for 1 hours
I tried gluing the axel, and it actually worked! It was hard to get the nuts on before gluing the axel, so if you can't manage to get your nuts on the axel just use some gorilla glue.
what water balloons did you use?
I love your videos ! it would make my day if you would respond :)
Try to make a wheel with hot glue stick😂
I was the last one who he tried 10:31
Can u please make killua's skateboard in fingerboard version pls
First i am so hail. Me. Such a banger Alex
😊
Hey my name is Bradley and I just started youtube you actually inspired me to start a channel
Bernie’s the tire and do it or you
The best hack is to shred more and git gud.
Sorry I wasn't clear if u was using plastic board burn it a few min then push it up then let cool down and try
I'm pretty sure they ment alcohol prep pads
Yo I finally made it into a video!! Sweet
Congrats
Light the nose of the fingerboard to make more pop
Onyx I put that first in the discord
Use chapstick as wax
You heat up the kicktail of a plastic board and bend it
Third one
Do you know a fingerboard under 40$
Ur The best fb youtuber, keep it upp man
like a complaete or a full set up
Use cardboard as bushings
This is my dads profile,but bet you won’t pin and awesome vids❤😊
Claim your “here in .2 seconds” ticket
👇🏻
You lnow that car graphic its on trak
Teak
Yoooooo
Who is an oh fan 👇🏼
Can you give me a sho7t out
Pls pin me I love your vids so much
Break the fingerboard with hammer ok sooooooooooooooooooooooooooooo bye
100th view
first
I am
@@Themancave815 idk hard too tell a lot of people are😭
please stop moving around
Hi
yo i love you bro for some reason i cant join ur discord thru ur link
Well I’m about to put duct tape on my wheels now. Peace.