Can’t wait to see you there! This will be my third time and it has been a awesome experience every time! Love your channel and the information you share!
Very nice setup! I opted for the 600mm .25 Panthera for my first major PCP to start shooting benchrest. Just a few too many adjustments on the M3 for a first timer. Looking forward to your tuning and accuracy videos. Please give us as much detail as possible in your tuning. You provide a great amount of education in this learning process, and I for one greatly appreciate it! So THANK YOU 🙏. Looking forward to watching your journey to RMAC. Keith
Hi! Admired! A very serious approach to business! I hope everything will be fine! I'm waiting for the continuation, the project is just super! It's a pity that I can't buy such spare parts... you can't buy from us.
Awesome 👌 I also installed the huma on both the first and second reg first reg has been holding at 200 bar for over two weeks now and no leaks, thanks to huma thanks for sharing bsafe at rmac good luck buddy
Still waiting for your tuning video on this 30 cal or if u can share your Micro and Macro numbers with Valve settings?? Thanks 👍🏻 thumbs up on video already heard u say 110 on second reg n 153 on 1st reg thanks for your help friend!!!
@@robertpiontkowski2164 yes I know 🫣 sorry , most of my time is going to practice as I am going to RMAC this year . But I will still make that video , got the new FX true ballistics chronograph on order 😉 My current settings are 1st reg 150 2nd reg 130 Macro 8 Micro 3 Valve 4 Shooting 50gr jsb at 880 fps
It should be a BEAST! However, one issue I ran into when using the integrated harmonic tuner and the AirMarksman 700cc bottle on my M3. The 700cc bottle is much longer than the 580cc bottle. To the point where the bottle will make contact with the tuner. In my case, I simply had to remove the integrated harmonic tuner, and replace it with a shroud (with the proper caliber adapter) with the detachable FX Harmonic Tuner. However, based on this video, and looking at the length of the HUMA Air replacement bottle regulator, you may run into the same issue. Maybe a 800mm barrel will solve this issue. Good luck at RMAC.
Bring both. You can have as many as you need. You will want to use the Panthera for PRS. The impact is a little too tall for the ladders and other obstacles.
I would love to get my hands on a M3. But a complete M3 costs €4000 - €5000. Most RUclipsrs get M3 and accessories for free. Than shooting is more fun to do. FX should make a affordable 1100 Pfs slug shooter with a wooden stock. Just a single shot bolt action rifle with 480-700 cc bottle. But they are aiming on the US market sadly. Have fun with your M3.
Beautiful rifle. Looks like a laser cannon. As a brand new air-gunner I purchased the RAW HM1000x for my first rifle. I've had it for about 5 months. It's awesome. However, eventually I really do want a FX Impact M3. It seems as if the learning curve is a it steep as far as managing the adjustability and tuning aspects, but might be well worth it. First time at the competition? Good luck! Did I her you say you have videos showing how to install various upgrades? Can you put the links in the description? Thanks for sharing.
Hi , thx for the support and welcome to the world of airgunning 👊 Yes first time in a competition 😬 I have filmed the installation videos but recently I have issues with my camera not recording audio so they are unusable
@@Airbuks If the video is still good, try doing voice overs. Watch the silent film and record your voice explaining what's happening. Then overlay onto the video. Granted, more work and hassle, but you might be able to cobble together some useful footage. I know I would like to see it. Take care. Again, congratulations on your first RMAC shoot out.
Can you tell me what the coking rod length is supposed to be. I have messed my m3 up. I keep blowing seals and feel I probably messed that up. I have add/adhd and struggle not messing things up. Sigh. Thank you for your video style. Thank you for your straight forward approach. Cheers
There's a lot of mathematics involved but if you're shooting a 25 caliber at 300 yds and a 30 caliber at 300 yd are they going to be equally as accurate? I suspect the 30 caliber would have more energy but then again it's heavier so I'm not sure? Someone said that the 30 caliber has Windrift, but to me that doesn’t make sense because it’s a heavier slug and it should be less susceptible to wind drift as compared to a 25 caliber. Don’t you agree?
Hi Keith, bench went well considering it was my very first real competition. 1st card was very good 226 6X as I was able to read the wind correctly, 2nd card was more challenging missing the finals with only 7points 🥴 overall finish 36st of 135 shooters . Will do better next year for sure now I know what to expect 👊 Tune was ZAN br100 56gr pellets at 835 fps
Hello friend, look, I have a fx impact m3 and I am losing air when I fill it up, it is heard that it is leaking through the barrel in front, what can I do, which oring is the one that I have to change
Nice video I will be making a few changes to my m3 starting with front & second regs. But the problem I'm having is with my panthera. What stack configuration do you recommend for Gen 3 huma reg.
Thx , I would go for the high power configuration 130-210 bar that is shown on the Huma air website . But I haven’t swapped the regulator on my Panthera yet
Can’t wait to see you there! This will be my third time and it has been a awesome experience every time! Love your channel and the information you share!
Thx buddy, looking forward to it! Will be my first competition ever as there aren’t any in my neighborhood
That’s what you call a beast of a M3. Love it and best of luck at RMAC.
Thx 👊
Very nice setup! I opted for the 600mm .25 Panthera for my first major PCP to start shooting benchrest. Just a few too many adjustments on the M3 for a first timer. Looking forward to your tuning and accuracy videos. Please give us as much detail as possible in your tuning. You provide a great amount of education in this learning process, and I for one greatly appreciate it! So THANK YOU 🙏. Looking forward to watching your journey to RMAC.
Keith
Thx for the support and congratulations on the Panthera 👊
Meu sonho é ter uma carabina dessa
really amazing the FX M3 GREETINGS FROM MEXICALI BAJA CALIFORNIA MEXICO
Lovely bit of kit 👌
Thx
Beautiful gun! Good luck at RMAC! Love your channel.
Thx 🙏
Hi! Admired! A very serious approach to business! I hope everything will be fine! I'm waiting for the continuation, the project is just super! It's a pity that I can't buy such spare parts... you can't buy from us.
Hi Jack , thx for you support! You mean you can get these parts in Russia ?
Awesome set-up!
Thx
Awesome 👌 I also installed the huma on both the first and second reg first reg has been holding at 200 bar for over two weeks now and no leaks, thanks to huma thanks for sharing bsafe at rmac good luck buddy
Yes still rock solid here aswel . Thx for sharing
I tried the 56g Zan pellets today and got to say they seem to shoot much better in the cross wind than the FX 44.6g pellets.
Yes they do ! But they do have more mass aswel . But they do preform very wel
Awesome your going to RMAC! Utah is a beautiful state.
Yeah , really looking forward to it
@@Airbuks stop at Utah airguns when you're at RMAC you can get the scope and the air bottle, and probably anything else you want.
Can’t wait for the tuning video next ! 👍🏻
👊
Still waiting for your tuning video on this 30 cal or if u can share your Micro and Macro numbers with Valve settings?? Thanks 👍🏻 thumbs up on video already heard u say 110 on second reg n 153 on 1st reg thanks for your help friend!!!
@@robertpiontkowski2164 yes I know 🫣 sorry , most of my time is going to practice as I am going to RMAC this year . But I will still make that video , got the new FX true ballistics chronograph on order 😉
My current settings are
1st reg 150
2nd reg 130
Macro 8
Micro 3
Valve 4
Shooting 50gr jsb at 880 fps
Thank you so much for your help I ordered both Huma regulators today !! Good luck at RMAC 👍🏻👍🏻!!!
I want this exact rifle!
👊
It should be a BEAST! However, one issue I ran into when using the integrated harmonic tuner and the AirMarksman 700cc bottle on my M3. The 700cc bottle is much longer than the 580cc bottle. To the point where the bottle will make contact with the tuner. In my case, I simply had to remove the integrated harmonic tuner, and replace it with a shroud (with the proper caliber adapter) with the detachable FX Harmonic Tuner. However, based on this video, and looking at the length of the HUMA Air replacement bottle regulator, you may run into the same issue. Maybe a 800mm barrel will solve this issue. Good luck at RMAC.
Thx , I was wondering already if that would work out 😉
Good luck !
Thx 🙏
Bring both. You can have as many as you need. You will want to use the Panthera for PRS. The impact is a little too tall for the ladders and other obstacles.
I know 🤔 but then I will have to ship both to the US .
Succes bij rmac, go, go, gooo
Ik zal mijn best proberen te doen 😉
Panthers in comparison to m3 just ad promotion. Even not close to m3.
I dont believe so they are just diffrent for diffrent goals so is the panthera better for prs : yes but good luck changing barrels on the panthera
I would love to get my hands on a M3. But a complete M3 costs €4000 - €5000.
Most RUclipsrs get M3 and accessories for free. Than shooting is more fun to do.
FX should make a affordable 1100 Pfs slug shooter with a wooden stock. Just a single shot bolt action rifle with 480-700 cc bottle. But they are aiming on the US market sadly.
Have fun with your M3.
Beautiful rifle. Looks like a laser cannon. As a brand new air-gunner I purchased the RAW HM1000x for my first rifle. I've had it for about 5 months. It's awesome. However, eventually I really do want a FX Impact M3. It seems as if the learning curve is a it steep as far as managing the adjustability and tuning aspects, but might be well worth it. First time at the competition? Good luck! Did I her you say you have videos showing how to install various upgrades? Can you put the links in the description? Thanks for sharing.
Hi , thx for the support and welcome to the world of airgunning 👊
Yes first time in a competition 😬
I have filmed the installation videos but recently I have issues with my camera not recording audio so they are unusable
@@Airbuks If the video is still good, try doing voice overs. Watch the silent film and record your voice explaining what's happening. Then overlay onto the video. Granted, more work and hassle, but you might be able to cobble together some useful footage. I know I would like to see it. Take care. Again, congratulations on your first RMAC shoot out.
@@daveyJ213 yeah but that’s lots of work for a video I know I won’t be happy with 😉
@@Airbuks You're the boss. Your work is appreciated,.
Can you tell me what the coking rod length is supposed to be. I have messed my m3 up. I keep blowing seals and feel I probably messed that up. I have add/adhd and struggle not messing things up. Sigh. Thank you for your video style. Thank you for your straight forward approach. Cheers
There's a lot of mathematics involved but if you're shooting a 25 caliber at 300 yds and a 30 caliber at 300 yd are they going to be equally as accurate?
I suspect the 30 caliber would have more energy but then again it's heavier so I'm not sure?
Someone said that the 30 caliber has Windrift, but to me that doesn’t make sense because it’s a heavier slug and it should be less susceptible to wind drift as compared to a 25 caliber. Don’t you agree?
Hell yeah
So how did you do at RMAC in bench rest and how did your gun perform for you? What tune did you settle on?
Keith
Hi Keith, bench went well considering it was my very first real competition.
1st card was very good 226 6X as I was able to read the wind correctly, 2nd card was more challenging missing the finals with only 7points 🥴 overall finish 36st of 135 shooters . Will do better next year for sure now I know what to expect 👊
Tune was ZAN br100 56gr pellets at 835 fps
Hello friend, look, I have a fx impact m3 and I am losing air when I fill it up, it is heard that it is leaking through the barrel in front, what can I do, which oring is the one that I have to change
Have you tried first to cock the impact when you fill it ?
could you put the links for all of parts to the description please?
You can find all the parts on the website of Huma air 😉
@@Airbuks ok
Question: If i replace the first reg for a huma, would that avoid the warranty of the gun?
Nice video I will be making a few changes to my m3 starting with front & second regs. But the problem I'm having is with my panthera. What stack configuration do you recommend for Gen 3 huma reg.
Thx , I would go for the high power configuration 130-210 bar that is shown on the Huma air website . But I haven’t swapped the regulator on my Panthera yet
Did you put epoxy on carbon fiber sleeve?
No just like this no epoxy
Mim manda o link desse BIPÉ QUERO COMPRAR UM
De state Alpha wolf Safari hundred yeard with slaug test video plz
I don’t have or have access to that one 🤷♂️
@@Airbuks 😭😭😭
Where do you get a 1:40 twist rate liner.
ราคาปืนกี่พันครับ
0 MOA rail and mount? Looks like their is no cant
The backbone rail has 30MOA and my Spuhr mount has another 20MOA 👍
Your M3 competition build.
Funded no doubt with everything free from FX.
You RUclips influencers are BS artists.
Envy is a powerful emotion isn’t it ? 😳
I'm new into FX, they say my range will improve if I upgrade from a .25 airforce condor to this.
Looks nice, bit bullshit reputation
Where are the comments guys??? Come on boost that algo
👊
That is overly customized, it looks more like a crane than a rifle 😅