LG Electric Dryer Belt Replacement
HTML-код
- Опубликовано: 11 окт 2024
- This video provides step-by-step instructions for replacing the drive belt on LG dryers. The most common reasons for replacing the drive belt are when the dryer makes noise, won’t start, or won’t turn on at all.
Click here to purchase Part #4400EL2001A: www.repairclini...
You can find printable step-by-step instructions here: www.repairclin...
Additional dryer repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclini...
All of the information in this belt replacement video is applicable to the following brands: LG, Kenmore, GE
Model displayed: LG Electric Dryer DLE2250W
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!
This is fantastic. I opened up the dryer and found a sock was stuck in the fan, and that's what brought the whole thing to a halt. Glad the belt is still in good condition. Thanks for creating this.
Thank you so much for this video! We have this exact same model and were sad that it broke after 7 years. This video saved us an expensive repair. It took us 3 hours and one sliced finger (be very careful removing the front panel at around 0.54!) to repair our dryer. Some of the screws were super tight, In our case, the problem was one of the back wheels, which took additional parts to remove. The right wheel on the back of the dryer was chipped off, with lots of black rubber crumbs around it. We ordered a replacement kit with the belt, 4 wheels, and the belt wheel + spring, and decided to replace everything. Everything is working again! Thank you so much!
You're welcome! We are sorry to hear about your finger. We hope that you have a great day!
Thank you soooo much for this perfectly detailed video. I watched it, ordered the belt from your site, it came in 2 days and I replaced it and put my dryer back together - all by myself! Thank you!!
Thank you so much for posting this, followed this step by step for taking the appliance apart, replacing the belt and puttng everything back together. Bought the belt for $10 from a different site, so saved money and time. couldn't have done it myself without this video
After 20 minutes, some sheet metal cuts, slippage on the belt because the replacement was tangled like trefoil knot and it worked. Thanks for the walkthrough!
Thank you, I ordered a mother board thinking that was the problem, but saw the belt broke after the fact. I bought the belt here for 30$, followed the video step by step and got it done.
This video was right on point. Exact instructions. My dryer had 1 more cord that this model did not have but it was a simple step. Wish all instuctions were a clear as these instructions. THANX!!!!!!!!!!!!!!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Great tutorial. My LG was slightly different but close enough that this tutorial showed me all the steps to get in there, change the belt as well as the idler puller and drum wheels. Thanks!
I have spent all day on your channel and I love it. Easy to follow and I have almost completed my dryer repair lol
@@repairclinic thanks! I did and the dryer came out perfect thanks to these videos lol
Fanstastic step by step! Thank you so much for guiding me to fix my dryer quickly.
This was perfect - it took 40 minutes to fix. Thank you
Thank you for this very detailed and easy to follow video. Just saved me from having to buy a new dryer.
You're welcome!
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
Thanks for the video. My belt broke, and this was easily to follow to get it fixed.
Just finished my belt replacement, eazy peazy thanks to your helpful video.
you guys deserve way more likes.. thanks for sharing!
You're welcome!
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
That's great! We're happy we could help!
Great video. I was able to replace belt, roller and idler. Took while due to space but this instruction helped a lot. Thanks!
Very helpful thanks. I ordered a repair kit, and once I opened the dryer I found that the front bearing wheels lost bearings and made a loud noise while operating. Fixed and operates quietly.
I fixed my dad's dryer last year using these instructions, with him getting in the way far too often. And right away Mom went back to running heavy loads of work pants.
very helpful. I had it apart to change out the high temp relay so I replaced the belt and the rest of the relays and sensors to be sure. had to wait a few extra days on parts so forgot how the belt goes back on. the moisture sensor is a two wire plug but plugs into a three wire female so that made me wonder too but this video cleared all that up. it needed a good cleaning anyway and I lubricated the four rollers too.
Thank you for this video!! I just fixed my dryer. I feel awesome!!!
Sweet!
great video! thanks so much! turns out it wasn't the belt; instead there was a lot of hair wrapped around the 4 rollers. the hair created so much friction, it kept the rollers from rotating easily, so the belt was dragging on the drum. my advice... if you're replacing the belt, make sure to inspect, clean, and grease the pins the rollers rotate on. runs like new. thanks again!
Great video, helped me to put belt on its placement. Thanks.
accurate and concise,thanks, We did it!!!
Great video! Very helpful!
What do I do differently if the control panel is bottom mounted? I can't seem to find the screws at 0:40 seconds on the top
Excellent. Thanks for taking the time!!!!!!
Great Video! thanks! It helped me fixed my wifes dryer!
If anyone has any resistance and the drum still won’t spin, make sure you didn’t put the drum on backwards. Look for where the belt has made a mark on the drum and make sure that’s towards the back of the dryer. One of our rollers got stuck 3-4 days ago and we weren’t able to bring in the drum holders until today. Went to put it back together and the drum wouldn’t spin with anything in it and seemed sluggish without anything. Noticed the belt had moved to a new spot so I flipped the drum and everything’s working
Goooodaaa 👌👏👏
How to change drain pump lg 7kg dryer Plz guide tnx
hello I have a quick question...are the rollers front & back the same size? why the back are orange and the front light blue? thank you
Sooooo helpful thank you very much!!
Miss Reese You are welcome.
Thanks ,man!
How do we fix the tumbler from moving out of place? Everytime we re add the belt and turn it - The tumbler moves forward
thank you !!!!!
I replaced all the guide wheels, pulley, spring and belt. However, my drum still does not spin. The motor operates normally and the drum spins freely when fully reassembled. Perhaps there are some pulley tension adjustments?
@@repairclinic Thanks for your reply. Took everything back apart and everything looks fine except one thing - one of the front roller wheels does not contact the drum. So, only three of the 4 roll along the drum. The fourth guide wheel is at least an inch below touching the drum when it's turning normally. And looking at the original wheel at that location, it appears it never made contact with the drum, the wheel shows no sign of ware.
But, for sure the motor is operating correctly and the drive wheel is tight and operating correctly and the belt is tight and in the correct place. Everything else looks correct - except the drum does not spin unless you help get it started. Hmmm? Would it help to try and replace the motor?
Rotate the drum. We had the same issue and I had put the drum in backwards. Look for where the belt has worn a mark into the drum and make sure that’s towards the back of the dryer. Flipped it and it’s now moving. For some reason the belt rubbed the pulley unless the drum was a certain way
@@MyLastSong719 Thanks Kate. We tried that a few times and still no luck. It's strange but its as though the motor doesn't have enough power to get the drum spinning - if we help it get started it works fine. Weird as I would have thought the motor would either function or not function.
@@thedetroiters ah bummer. I would think that as well. Hope you figure it out!
Can you direct me to a video on how to take the belt off so i can replace it?
Pull the pully back.
and it will take tension off the belt,grab it and unloop the belt..
Best
Great video. Too bad LG over-torques the screws, making it impossible to remove many of them. I had to give up after 4-5 screws. There is no way to fix these driers.
what are you talking about they are fixed everyday
They are easy to fix.i used a bigger Phillips screw driver,replaced a high limter thermostat,a belt..
At :45 did you really say to UNINSTALL THE SCREWS??? HAAAAAAAAAA let me guess... are you Canadian?
Koos Lekoos We ship to Canada. We are located in Michigan.
I appreciate this video but don’t let it fool you five minute video took 2 1/2 hours