I am a Level-1 thermographer, retired. I hope the temp meas points can be placed during analysis using laptop. To set the points while holing the camera steady at site will be difficult.
Yes, UTi260B PC software supports switching color plates and re-marking temperature points on the computer. Here is the link of UTi260B➡thermal.uni-trend.com/product/uti260b/#Downloads9eb2-57af
Thank you for reaching us. The difference between UTi260B and UTi260E you can see from this link➡️drive.google.com/file/d/1otIVX5Cq0_rtrZqmpdyM2v1Fq4kypBPN/view?usp=drive_link
Hi Sir, thanks for sharing your feedback and will pass it along to our product team. At the moment, you could consider UTi320E, UTi260E, UTi192M, UTi384M and UTi640C offering the isotherm function that can manually control the temperature.
@@maamaa6557 UTi260E is sold in Chinese, and corresponding international version is UTi720E. Here is the link of UTi720E manual that you can check>>>thermal.uni-trend.com/product/uti720e/
The temperature measurement ranges corresponding to low gain and high gain are different ( high gain is -20~150℃, low gain is 150~550℃). The temperature measurement range span of the two is relatively large, and the device will "freeze" because it is Equipment shutter automatic calibration-->In order to adapt to the test environment temperature and ensure the accuracy of temperature measurement
@@UniTrendTechnology it freeze and i can't do measurement to anything until i have to restart it . This video shows what I mean ruclips.net/video/aDY6xTXkFVY/видео.html
@@seoseo4017 Ok, thank you for your video, are you connected to the PC software when you operate it? And what firmware version please? Then our technical engineer can be better to know how to fix it, thank you very much
@@seoseo4017 Attached link is our latest firmware package 1.2.32, please try updating to see if it can solve the problem. drive.google.com/drive/folders/19IiXyQucdcTQ20EpFNJVNEgDG3ZfmOcH?usp=drive_link
Hi Sir, yes, the firmware of UTi260B Thermal Imager has been updated as well as the UTi260B software. You can contact with our after-sales team to get the detailed information and support, the email is: support@uni-trend.com.cn
I wrote to you a few weeks ago that my UTi260B hangs from time to time and asked if you could provide me with the latest firmware. Unfortunately, no response from your side.
While you're charging, please pay attention to these situation: ●Charge with standard charger & cable, do not use a bad charger&cable ●Avoid charging multiple devices using the same socket ●Full charge time ≤5 hours
Hi Sir, thanks for reaching out. Yes, the UTi260B can meet your needs. The principle of thermal imager is that if the surface temperature of an object in the detection scene forms a temperature difference, it can be detected and recognized through a thermal imager
Hi Sir, thanks for reaching out. Unfortunately, the UTi260B doesn't have the feature you mentioned. But the good news is that the feature will be available in our upcoming new products. Stay tuned!
Hi Dear, Thank you for contacting us regarding your UTi260B. Unfortunately, we don't have a separate firmware driver available for download. The firmware is typically pre-installed on the device and is designed to work optimally with the hardware. If you're encountering any issues with your UTi260B, please provide us with more details to email . We'll do our best to assist you. Here are some questions that might help us troubleshoot: * What specific issue are you experiencing? * Have you tried resetting the device or updating the software on your computer? * Is there any error message or code that appears? Please feel free to share any relevant information, and we'll work together to find a solution. Best regards, Uni-T Team
Hi Sir, for the calibration, please press the back button for auto-calibration/manual calibration. The body color, it cannot be changed. Please press the set button(Settings>Measurements>Distance) to set the distance.
I just bought a Uni-T PRO UNi690b that looks just like this Uti260B and works amazing. I 've gone to Uni-Trend site to check for any software or firmware updates but there is no UNi690b. There is only this one, the UTi260b. Have I 've been scammed, is there really a Uni690b or only the Uti260B ?
When water affects the surface temperature of the wall, different temperatures can be detected by thermal camera within temperature measurement range (temperature measurement range of UTi260B is -20℃~500℃), but it is related to the water temperature and wall thickness. It is best to use it with a moisture meter. Our UT377C Pinless Moisture Meter will be released soon.➡️meters.uni-trend.com/product/ut377c-pinless-moisture-meter
Hi Sir, thanks for reaching out. We have an authorized distributor in UK at the moment. Please see the contact details below. Company name: JPR Electronics Ltd Email: sarah@jprelec.co.uk Phone: 44(0)1582 470004
i just found out that not all charger work for this unit. My phone samsung note20 charger doesnt work, my ipad charger ubsc also doesnt work. I thought the battery was dead. I even cut it open to look at the battery. Today i plug into my pc ( USB) and it's start charging. It charges on low power outlet. only. Don't throw it away!
Hi Sir, thanks for reaching out. Regarding charging, when the output power (voltage or current) of the charger used exceeds the acceptable power of the thermal imager, it will not be able to charge. It is recommended to use a safety-certified 5V/2A power adapter for charging.
I am a Level-1 thermographer, retired. I hope the temp meas points can be placed during analysis using laptop. To set the points while holing the camera steady at site will be difficult.
Yes, UTi260B PC software supports switching color plates and re-marking temperature points on the computer. Here is the link of UTi260B➡thermal.uni-trend.com/product/uti260b/#Downloads9eb2-57af
does UTI260B able to use for leak detection in pipe? hot/cold water leak ?
Yes, it can be detected if there is a temperature difference. UTi260B's temperature measurement range is -20℃~550℃
What's the difference between 260B and 260E? Googled a comparison to no avail.
Thank you for reaching us.
The difference between UTi260B and UTi260E you can see from this link➡️drive.google.com/file/d/1otIVX5Cq0_rtrZqmpdyM2v1Fq4kypBPN/view?usp=drive_link
Any plans for allowing manual control over upper and lower temp limit for the palette? Now it's only automatic and not optimal for all occasions..
Hi Sir, thanks for sharing your feedback and will pass it along to our product team. At the moment, you could consider UTi320E, UTi260E, UTi192M, UTi384M and UTi640C offering the isotherm function that can manually control the temperature.
I think this feature would be extremely helpful, please add it in. I only realised after buying it so i cant consider other models now
@@UniTrendTechnology I can't find on your webpage model UTi260E. Only UTi260B is available, but it doesn't provide isotherm function.
@@maamaa6557 UTi260E is sold in Chinese, and corresponding international version is UTi720E. Here is the link of UTi720E manual that you can check>>>thermal.uni-trend.com/product/uti720e/
i have same camera and it do hanging when i set low gain or high gain it become freeze so i have to turn it off then trund on to work again.
The temperature measurement ranges corresponding to low gain and high gain are different ( high gain is -20~150℃, low gain is 150~550℃). The temperature measurement range span of the two is relatively large, and the device will "freeze" because it is Equipment shutter automatic calibration-->In order to adapt to the test environment temperature and ensure the accuracy of temperature measurement
@@UniTrendTechnology it freeze and i can't do measurement to anything until i have to restart it . This video shows what I mean
ruclips.net/video/aDY6xTXkFVY/видео.html
@@seoseo4017 Ok, thank you for your video, are you connected to the PC software when you operate it? And what firmware version please? Then our technical engineer can be better to know how to fix it, thank you very much
@@UniTrendTechnology Freezing occurs whether it is connected to the computer or not
Firmware version 1.2.30
@@seoseo4017 Attached link is our latest firmware package 1.2.32, please try updating to see if it can solve the problem.
drive.google.com/drive/folders/19IiXyQucdcTQ20EpFNJVNEgDG3ZfmOcH?usp=drive_link
Plan to get one for conducting basic thermography class.
hi....will this unit get's the update firmware?
Hi Sir, yes, the firmware of UTi260B Thermal Imager has been updated as well as the UTi260B software. You can contact with our after-sales team to get the detailed information and support, the email is: support@uni-trend.com.cn
@@UniTrendTechnology hi thanks for your quick respon. I have this unit since last Years (buy from Aliexpress Uni-T Official)
Consegui fazer medição a noite ?
Yes, our thermal imagers can measure temperature at night.
I wrote to you a few weeks ago that my UTi260B hangs from time to time and asked if you could provide me with the latest firmware. Unfortunately, no response from your side.
Did you ever get a resolution, or should I buy a Flir?
@@ibsn87every high quality thermal camera will do that. The sensor has to refresh. Do not update these cameras it is very likely to crash permanently.
What a coincidence... I ordered this particular model yesterday.
Enjoy, partner!
pode me dizer qual a forma correta de carga da bateria dela, eu tenho que carregar ela com a pistola ligada ou não precisa e qual o tempo de carga?
While you're charging, please pay attention to these situation:
●Charge with standard charger & cable, do not use a bad charger&cable
●Avoid charging multiple devices using the same socket
●Full charge time ≤5 hours
Thanks @@UniTrendTechnology
Would this model help detect leaks around windows or underfloor pipes?
Hi Sir, thanks for reaching out. Yes, the UTi260B can be used to detect leaks around windows/underfloor pipes.
Can I use it on the automotive line? To check clogged radiator or electrical cable and relays?
Hi Sir, thanks for reaching out. Yes, the UTi260B can meet your needs. The principle of thermal imager is that if the surface temperature of an object in the detection scene forms a temperature difference, it can be detected and recognized through a thermal imager
whats difference Snap on EETh300 and Unit 260b?
Hello, does it has option to take digital photo and thermal photo at the same time? I mean, one click - two photos.
Hi Sir, thanks for reaching out. Unfortunately, the UTi260B doesn't have the feature you mentioned. But the good news is that the feature will be available in our upcoming new products. Stay tuned!
pls. can you share 1.2.32 firmware driver again for UTI260B.
Hi Dear, Thank you for contacting us regarding your UTi260B.
Unfortunately, we don't have a separate firmware driver available for download. The firmware is typically pre-installed on the device and is designed to work optimally with the hardware.
If you're encountering any issues with your UTi260B, please provide us with more details to email . We'll do our best to assist you.
Here are some questions that might help us troubleshoot:
* What specific issue are you experiencing?
* Have you tried resetting the device or updating the software on your computer?
* Is there any error message or code that appears?
Please feel free to share any relevant information, and we'll work together to find a solution.
Best regards,
Uni-T Team
@@UniTrendTechnology my UTI260B bricked when i try to update v2.0... that you share before. now my 260b stop at UNI-T logo. How i can fix it?
Hello friend
How to make calibration?
Is there selection for body color? Or setting for distance?
Hi Sir, for the calibration, please press the back button for auto-calibration/manual calibration. The body color, it cannot be changed. Please press the set button(Settings>Measurements>Distance) to set the distance.
is the unit 690B the newer model or is the latest one ?
Hi Sir, the UTi260B is a new model in 2021 & it's also a popular model at the moment.
I just bought a Uni-T PRO UNi690b that looks just like this Uti260B and works amazing. I 've gone to Uni-Trend site to check for any software or firmware updates but there is no UNi690b. There is only this one, the UTi260b. Have I 've been scammed, is there really a Uni690b or only the Uti260B ?
Hi Sir, the UTi690B is the model of our customer. If you have any questions, you can consult the seller.
I think their is a water leak in one of the walls in my newly constructed house. How can this help?
When water affects the surface temperature of the wall, different temperatures can be detected by thermal camera within temperature measurement range (temperature measurement range of UTi260B is -20℃~500℃), but it is related to the water temperature and wall thickness. It is best to use it with a moisture meter.
Our UT377C Pinless Moisture Meter will be released soon.➡️meters.uni-trend.com/product/ut377c-pinless-moisture-meter
Great video
Glad you enjoyed it.
Any sellers in the UK?
Hi Sir, thanks for reaching out. We have an authorized distributor in UK at the moment. Please see the contact details below.
Company name: JPR Electronics Ltd
Email: sarah@jprelec.co.uk
Phone: 44(0)1582 470004
😍😍wow!! I wanna this one quickly 😂
Sounds like a plan!
i just found out that not all charger work for this unit. My phone samsung note20 charger doesnt work, my ipad charger ubsc also doesnt work. I thought the battery was dead. I even cut it open to look at the battery. Today i plug into my pc ( USB) and it's start charging. It charges on low power outlet. only. Don't throw it away!
Hi Sir, thanks for reaching out. Regarding charging, when the output power (voltage or current) of the charger used exceeds the acceptable power of the thermal imager, it will not be able to charge. It is recommended to use a safety-certified 5V/2A power adapter for charging.
hy uni trend
Hi sir, nice to meet you at here and thanks for your watching.
whats your name plz
ok, I'm from pakistan, here the trend of uni trend is going to be on the peak
So great to hear! Thanks for your kind words. By the way, you can call me Jack.
Jack I have made few videos on these products like this
ruclips.net/video/BGKPMYp85UM/видео.html