This is why I subscribed. Just a guy, behind the barn, using gear in the average guys $$ range. " well lets check it out " is the perfect answer to the critics.
As a long time hunter but brand new crissbow user i really enjoy your vids.clear ,concise & you have a good sense of humor. Ive found a great deal of useful information in them...thank you,it is appreciated!
I love Rich's research and wisdom. He explains things clearly and in layman's terms. He is modest to boot. I had been thinking about getting an Excalibur but Rich's channel encouraged me to splurge on one. One of the best decisions of my life.
I have an engineering degree, and hearing someone try to argue that a higher brace height would increase arrow velocity honestly just hurts my soul. Yes, a greater brace height puts more strain on the limbs, but you are not getting the benefit of that strain being released, which is what would power the arrow. The other benefit of a lower brace height that usually goes unmentioned is that it puts less continious strain on your limbs. If you have wooden limbs, definitely go with a lower brace height if you are leaving it strung for long periods...
#DeathbyBunjie I loved that "Derek Davis's" response, it had me in stitches. More tension on the strings? He's the one who needs to do his homework or at least go back to school and re-learn the basics in physics! LOL
Great vid Rich, but on a side note Excalibur used the same exact limbs on these older bows from the vixen 13.5 power stroke axiom, Phoenix 14.5, Exocet 15.5 & exomax 16.5 power stroke at 350 fps. So all u have to do for a faster bow is buy a longer Exocet or exomax barrel to achieve 330 or 350 fps. It might sound silly but they're that simple
Yup, your spot on Locks. My Matrix 330 shares the limbs of the 350 and 400 as well and swapping to the longer rail will give me those speeds. Personally I wouldn't do that on Bungee since its a much older bow and I would be afraid of stressing those ole limbs so much. My Excalibur, being only a 330, I have the confidence that the limbs are not stressed since they can easily take up to 400 fps of power stroke inches.
@@HomesteadOnThePreserve *With an older bow.... I agree. Except, I will add: NEW replacement limbs combined with S-5 / 1966 string vibration noise stops fitted with aftermarket 'DR. Stirrup bumpers' and heavier arrows for reduced noise "is the way to go". >>And With New limbs and a new slightly longer same series rail... there is some extra energy and extra speed benefit....for the 40+ yards shots that Rich claims to never take
Another awesome video Rich! When I was researching brace height, it kept coming up (main researching was on the Excalibur Matrix Forums) as 1" being the best. Second most popular was 3/4". I did a LOT of testing at 25 yards with a brace height from 3/4 to 1 1/4" in 1/8' increments and 1" was definitely the most accurate / consistent. As a bonus, the bow would slightly quieter when higher then 3/4 due to the slap of string on the back of the limbs. At 25 yards my Matrix will consistently place the same arrow into the exact same hole, it's really an amazing bow! (different arrows will shoot within 1/4" to 1/2" of that hole) Side notes: Personally, I enjoyed the lack of music as it's easier to concentrate on your words. Hey, we have the same chain saws, love that Stihl! Cant wait for your "decibel testing" video! I have been tinkering around myself and I am anxious to see what you have in store for us! Take care my friend.
With the string stops in place I am forced to go with a greater brace height like that, so that makes sense. I'm glad to hear yours is shooting so well! The decibel meter didn't show much difference but I will post that this week hopefully. Thanks!
Good points Rich. It looks like Bungie has some upgrades he is ready to get. Can’t wait for that video. Also did u get a new toy as well, the drone? Should make for some different angles and great videos as well. I’m really looking forward to your upcoming videos, type of broadhead you will be using (I think I already know the answer), and the upgrades Bungie is getting.
Crossbow nation, your site and every other crossbow site I could find all disagreed with the commenter suggesting you do more homework. 😂 I’ll go along with you and several professional websites claiming shorter brace height increases arrow speed.
Rich thanks for another outstanding video. You made an excellent case for how brace height affects speed. I would have thought it would be the opposite, but like with so many things in life it's hard to know the truth unless you dig for it. "Facts are stubborn things; and whatever may be our wishes, our inclinations, or the dictates of our passions, they cannot alter the state of facts and evidence." John Adams
Thanks to your channel, which I believe has be the best comprehensive info on crossbows, I decided to get an Axiom myself. I find myself referring to your channel over and over again. Thank you so much!
I also got free shipping from the Archery shop that took it in on trade and went through it! That's funny, I just read where you used to have a Winchester 94. I have one now for my General gun Hunting! We look a little alike too, but you have much more hair! Don't take any of this wrong, just a comment! Did a lot of research on crossbows and what you say makes a lot of sense! Thanks for doing all those great crossbow videos!
Hey guys, I've been watching just about every video you put out since last hunting season in preparation for buying a crossbow myself for hunting. I just picked up a budget crossbow, Barnett Jackal. Not even close to as elegant as Mr. Bunjie but I'm excited to do some hunting with it this season and that's all thanks to you! Looking forward to some more videos this season!
Cant wait to see your next video. I just bought my first Excalibur, (micro 335), and I was thinking about buying the SDS for it. Cant wait to see the difference in the sound of yours.
Have you guys had any issues with the limbs on the Micro? I avoided it due to a lot of chatter about that on the introwebs. My 2018 Bulldog 330 Suppressed shows up today!!! I used to have a Pheonix... so it will feel small to me. I test fit a few bows at the shop before buying. I did like the tiny Micro tho! Thing is sweet
Well said bud totally makes sense about the height ill check mine when i get home tonight loved the vid learned lots from it god bless you buddie have great day and can't wait for more vids of crossbow stuff
We keep the servings on our excaliburs that have the mark on rail just on inside edge of mark which is about 3/16 from bumpers. This does not tear up rubber as much ! We sand the mark so it does not wear serving as much! Also BOO over on excal forum has info on how to sand and smooth the trigger claws so your servings will last a lot longer.. Micro excal eat string servings unless you smooth claws. Put nothing on servings,no wax etc as this softens it .no rail lube on rail as this will get on servings. I use silicone spray on rail and wipe it dry !!
sproulman1 Firstly Great Videos Mr. Bunny, it seems that I also have trouble with my centre serving. It seems to chew up the bow string after approximately 20 shots. I own an Excalibur micro. Any suggestion on a remedy, I just read that sanding the retaining claws in the trigger will solve the problem?
Man you gettin not enough likes. 118 likes with 2000 views? The hate is strong in people...lol another superb video. Liked! Stay healthy and keep em videos comin.
I had horrible creep with my matrix 355. I ended up getting so frustrated with it that I contacted Boo on Excalibur forums for a custom string. What a game changer! If anyone is having this issue check him out, best $65 I've ever spent.
Nice drone video! Always good information from you, thanks! I never even considered the brace height might be changing. Now I have one more thing to keep track of.
Sir what a great video !!! In layman's even !!!! I am researching as much as I can to be knowledgeable as possible when I buy my first crossbow !!! ie: Excalibur or tenpoint which in my eyes Excalibur is going to get my nod. One of the Reasons being the point you made about adjusting your brace on the crossbow the Excalibur can be done by yourself as the tenpoint you would have to bring it to a shop to do !!! If you always have to bring your crossbow in for tuning all the time could get costly !!! Thanks for putting this out there !!!
Awesome first time I ever saw you not do an excellent intro. Rare. Lol Great points. I need to get mine out and do some practice because last season late I picked up some new bolts and tips so I need to get me some ready.
the left limb on my micro supressor 355 broke... the arrows that come with it are TOO LIGHT everybody learn and take heed you need at least 100 grain inserts in your arrows. Micro suppressor has 16' bolts. so I bought 18 inch excalibur diablo (easton carbon) arrows cut them down and glued in 100 grain brass inserts. the end result is a 16' bolt same as stock but heavier.
Great information, I finally got my new ex-caliber. It is a matrix 355/360. I do think the brace height needs to be adjusted on it. The string is actually touching the rubber dampeners. So I will have to buy one of those strings that I can cock the bow back with to take the actual tension off of the main string so i can twist it a few times to adjust the brace height. Thank you again for all of your helpful information.
Great video, Rich. I definitely learned something from you on this one. On a different note, I'm curious what you think about Velvet antler hunting. In Tennessee, they are opening one weekend to hunt during Velvet antler period about a month before deer season begins. It's archery only, private land, buck only and is to provide hunters the opportunity to harvest a Velvet-antlered buck. I'm going to hunt it only for the early opportunity to hunt (August 25 weekend). I don't really care either way about a Velvet rack personally. You always have a good ethics perspective in your videos and your thoughts would be appreciated (video or otherwise)!
Just heard about that in a podcast today! I love the idea and would love to have a nice velvet rack on the wall. The only velvet Buck I've ever shot was in Maryland on my first trip down there. Don't have a lot of experience with it but it was a special memory. Good luck if you get out! A good topic for down the road.
Yep awesome!! Q, i,v got a recurve crossbow Sabre Saxon that i own from 1994. At the moment the limb in the middle is splintering. The limb is made from glasfiber, what,s the best way to fix this? thnx Anno Netherlands and stay save!
Rich you know how much I love your videos and your detailed Analysys, but this is too much Techical detail for me! Would love to see you to a video on arrow accuracy and broad-head accuracy
I know what you mean, I like to simplify things and not get so technical. The next one's worse LOL. But will be back to good old simple crossbow fun in the near future. Good ideas, thanks!
I see what you're saying but If a recurve bow has a draw weight of 50lbs at 28" and 60lbs at 30". Doesn't that mean that the draw weight is increased with a longer brace height? I mean, this should apply to crossbows too right?
I tried to quiet my bow with excalibur’s sds but it wasn’t much different and it slowed it down so I took it all off ... be interesting to see how you get on...👍🏻
Hey finally recieved my crossbow after shooting it was pleased but very concerned as mentioned in earlier coment on another of your videos i have mostly hu ted with verticle bows and recurves at that my question is have you found a sweet spot on brace height to reduce noise.... from a traditional archers stand point we start silencing process by adjusting brace height to within reason of course. As a trad archer of 30 plus years my first shot with the matrix 355 sounded like a couple 2x4 being slaped together in a public library lol aftet reading the owners manual i discovered the brace height was indeed below recomended manufacturer measure once corrected i noticed some noise reduction not alot but was considering playing with it before adding air brakes string silencers ect
It made a difference for me, but not a lot, also. The air brakes I think made the most difference. I've done videos on quieting the crossbow you can check out. Also check out this one on brace height. I hope that helps! ruclips.net/video/lwTpXs8jmGg/видео.html
Ok I shot my new arrows at my new Morrell bag target everything is great at 20 yrd s...need to shoot further...back in the spring a limb broke on my matrix sent it back,the factory set it for me...my string has stretched that it hits the reds...im not moving it off the REDS IT is shooting so well...love all my Excaliburs and the service but I'm leaving everything as it stands now...string is almost on the REDS but dang it I'm not chancing snything
Probably best to plant early August to avoid heat and dry? Look up your early frost dates and count.back 90 days, that's when to target for fall plots, good luck!
Great video! Any idea why my exbows change point of aim from season to season? When I check POA on both of both of them at the beginning of each season they both have both have always shifted by a few inches from the past season. I always figured it was the cause of “string stretch”?
@@Deathbybunjie both are compound Xbows. One has had the complete front limb set, wheels, strings, and and cables replaced. Been shot about a couple dozen times since replaced around 9 years ago.
Isn't proper brace height pretty much dependent on the persons stature? When I sit in my hunting chair, my sitting height is different than someone who's 5'6 while I'm 6'2
It's going to vary by string, one Twist on a 36-in wide limb is not the same as a Twist on a 25 in wide micro series Excalibur or a Twist on one of my compound crossbows that are smaller yet, I'm betting
Great video as usual!! I have a question though... I have an Excalibur 380 bulldog crossbow and I realized that the string is closer to the riser on the left side than it is on the right side. In other words, the string seems to be on an angle if you look where the riser mets the rail. Why is this happening and what can be done to fix it?
Check and make sure your limbs aren't failing, that one of them doesn't have a crack or something? And make sure everything is bolted down tight. I suppose if something was loose it could be cockeyed. I really don't know what would cause something like that. I doubt it is the string. Perhaps have a shop look at it? Please let me know what you find out, it would be good information to have and share.
@@Deathbybunjie Cool!! Thanks for the reply and when I get it sorted I will certainly let you know the reasoning why. Keep up the vids as you are a very educational man for people who are learning about crossbows and all of the ins and outs... Greatly appreciated all the way from Montreal!!
Probably no, Google "excalibur string and brace height guide" and it will tell you the proper measurement, it's a PDF so I can't post it here. But you want 1/4" or so off the bumpers (assuming still within the recommended brace height). We talk about a bit more in this video here around 16:00, I hope that helps! ruclips.net/video/gqHmRVQwr-8/видео.html
Are you still satisfied with your crossbow? Would you consider a crossbow with cams? Do you have deer jump the string? I like the idea of recurve crossbow but sound of a recurve is loud and I'm concerned about still jumping.
Watch my quieting video that helped a lot IMO. I love this xbow and no reason to upgrade. Never lost a deer due to string jumping, although they can drop a bit. 10th season with this xbow coming up. Will do a "birthday video" about it this year but I kinda just previewed it lol.
Dan,putting nothing on servings! Use silicone on rail every 20 shots wipe it off do not let it wet on rail! Micros tear up servings.. Get a FF string from vixenmaster he is on paypal .036 angel majestic. Yes polish the claws go to Boo excalibur he has hoq you do it! Good luck!!
Hey Rich, I just put a new string on my Excalibur Vortex and cant get it to go even near the required Brace height, recommend is 1/2" to an 1" brace height from the riser, mine must be between 2 to 3" Its well past the last notch in the riser. I tried twisting and untwisting string but neither worked! Any advice would help Thanks
i have a Matrix 405. after installing new string , my brace height is approx 1 3/8 inches. the chart calls for the brace height to be between 5/8 and 1 inch. There are no twist in in the string. will the string stretch and will this have an effect on accuracy. new to crossbow hunting and really like your videos.
How do you make mark for the brace height if the rail is black an aluminum? I don’t have anywhere I can make a mark to make sure the brace height is even.
Got a question rich I was trying to get my string to be in the lines by twisting it is in setting about an half an inch pass the last line towards my scope I twist it and it gets closer to the scope am I doing something wrong I shot it at 10 and 20 yards seems good should I leave it and not worry about it
if accurate you're probably okay. TIGHTENING the string should bring it TOWARD the scope (INCREASING brace height), check with manufacturer or owner's manual for proper brace height, i hope that helps
I bought a compound crossbow last year came with scope that is no to my likeing to many yardage hash marks 8 I think. to close together. do you have one you would recommend ?
Doing a video on Scopes soon. I will mention this. I'm kind of in the same boat you are. Faster bows these days and Scopes these days tend to have more reticles. Unfortunately, no suggestions as of yet.
Great tips Rich . I have a question . Have you ever done any work on the trigger to smooth it out. I have the same bow, and the trigger is not smooth at all. I think that the shots would be much more accurate if the sqeeze was smoother.
Triggers are difficult on crossbows because they are holding back so much force. I like my trigger but keep in mind I'm transitioning from a model 94 Winchester 30-30 haha. I will address triggers down the road but that's a topic that I will need a shop for. I have not done anything to my trigger.
I just bought a Excalibur-Axiom-SMF-Crossbow-w-scope on Ebay for $225. and I have your great videos to blame! I can't wait till it gets here! My first crossbow. Any Ideas for a name? Thank You Very Much!
I only know one name and it's taken LOL. Seriously though if you're going to name it, think hard and pick a good one. Something personal. For what it's worth I still love my Axiom. Been saying that for years. There are so many different nice models out there. You almost can't go wrong. Good luck and keep me posted on how you make out! And on the name!
All hail Whisper! Thanks to you and www.fantasynamegenerators.com/bow-names.php I am a Stroke survivor so I was led to the Axiom from your great videos and above by the right deal at the right time! Thanks
Yes, I wanted the Matrix 380 or so I thought until cocking a Axiom. All review videos of the 380 were very quiet! I would have had to get the cocking device so your speed video really helped me decide. Here in central Florida there aren't many long shots with the WMA's being so dense anyway. I was thinking the Matrix 380 could make a 10 or so yard longer shot. But, you also have a great video on long shots! Thanks for the great videos! Ever think of starting some kind of nation wide crossbow club? Thanks again and we all Hail Bunjie!
This is why I subscribed. Just a guy, behind the barn, using gear in the average guys $$ range. " well lets check it out " is the perfect answer to the critics.
Thanks for this! I appreciate it and thanks for watching.
As a long time hunter but brand new crissbow user i really enjoy your vids.clear ,concise & you have a good sense of humor.
Ive found a great deal of useful information in them...thank you,it is appreciated!
I love Rich's research and wisdom. He explains things clearly and in layman's terms. He is modest to boot. I had been thinking about getting an Excalibur but Rich's channel encouraged me to splurge on one. One of the best decisions of my life.
Absolutely outstanding explanation and great video. Thanks as I really appreciate it.
LOL -> no intro sequence.
Good point on the longer power stroke giving you more speed. Good info as usual Rich.
Thanks and thanks for watching
Good to see you are back making videos. We've missed your discussions. Keep up the tips, please.
More coming thanks for your interest
I have an engineering degree, and hearing someone try to argue that a higher brace height would increase arrow velocity honestly just hurts my soul. Yes, a greater brace height puts more strain on the limbs, but you are not getting the benefit of that strain being released, which is what would power the arrow. The other benefit of a lower brace height that usually goes unmentioned is that it puts less continious strain on your limbs. If you have wooden limbs, definitely go with a lower brace height if you are leaving it strung for long periods...
Agree 💯
#DeathbyBunjie I loved that "Derek Davis's" response, it had me in stitches. More tension on the strings? He's the one who needs to do his homework or at least go back to school and re-learn the basics in physics! LOL
Good to see you back!
Thanks! And thanks for watching.
Great vid Rich, but on a side note Excalibur used the same exact limbs on these older bows from the vixen 13.5 power stroke axiom, Phoenix 14.5, Exocet 15.5 & exomax 16.5 power stroke at 350 fps. So all u have to do for a faster bow is buy a longer Exocet or exomax barrel to achieve 330 or 350 fps. It might sound silly but they're that simple
I don't doubt that one bit, I can see how that would work. Thanks for sharing that with me. And thanks for watching!
Yup, your spot on Locks. My Matrix 330 shares the limbs of the 350 and 400 as well and swapping to the longer rail will give me those speeds. Personally I wouldn't do that on Bungee since its a much older bow and I would be afraid of stressing those ole limbs so much. My Excalibur, being only a 330, I have the confidence that the limbs are not stressed since they can easily take up to 400 fps of power stroke inches.
@@HomesteadOnThePreserve *With an older bow.... I agree. Except, I will add: NEW replacement limbs combined with S-5 / 1966 string vibration noise stops fitted with aftermarket 'DR. Stirrup bumpers' and heavier arrows for reduced noise "is the way to go". >>And With New limbs and a new slightly longer same series rail... there is some extra energy and extra speed benefit....for the 40+ yards shots that Rich claims to never take
Another awesome video Rich! When I was researching brace height, it kept coming up (main researching was on the Excalibur Matrix Forums) as 1" being the best. Second most popular was 3/4". I did a LOT of testing at 25 yards with a brace height from 3/4 to 1 1/4" in 1/8' increments and 1" was definitely the most accurate / consistent. As a bonus, the bow would slightly quieter when higher then 3/4 due to the slap of string on the back of the limbs. At 25 yards my Matrix will consistently place the same arrow into the exact same hole, it's really an amazing bow! (different arrows will shoot within 1/4" to 1/2" of that hole)
Side notes: Personally, I enjoyed the lack of music as it's easier to concentrate on your words. Hey, we have the same chain saws, love that Stihl! Cant wait for your "decibel testing" video! I have been tinkering around myself and I am anxious to see what you have in store for us!
Take care my friend.
With the string stops in place I am forced to go with a greater brace height like that, so that makes sense. I'm glad to hear yours is shooting so well! The decibel meter didn't show much difference but I will post that this week hopefully. Thanks!
Good points Rich. It looks like Bungie has some upgrades he is ready to get. Can’t wait for that video. Also did u get a new toy as well, the drone? Should make for some different angles and great videos as well. I’m really looking forward to your upcoming videos, type of broadhead you will be using (I think I already know the answer), and the upgrades Bungie is getting.
Glad you like it, should spice things up a bit with the Drone. It's all good, looking forward to this year as well.
Good to know the facts. Thank you!
Crossbow nation, your site and every other crossbow site I could find all disagreed with the commenter suggesting you do more homework. 😂 I’ll go along with you and several professional websites claiming shorter brace height increases arrow speed.
Rich thanks for another outstanding video. You made an excellent case for how brace height affects speed. I would have thought it would be the opposite, but like with so many things in life it's hard to know the truth unless you dig for it.
"Facts are stubborn things; and whatever may be our wishes, our inclinations, or the dictates of our passions, they cannot alter the state of facts and evidence." John Adams
Great quote, thanks and thanks for watching
Thanks to your channel, which I believe has be the best comprehensive info on crossbows, I decided to get an Axiom myself. I find myself referring to your channel over and over again. Thank you so much!
That's great to hear, good luck out there!
Thanks for doing the crossbow a great service through your videos! Great discussion board and perfect info for beginners and experienced shooters.
Glad to hear it, thanks and thanks for watching
Thanks for another awesome video! I am looking forward to the quite Bunjie!
Thanks, we shall see!
Hey man just ran across your video. Man its nice to see someone else who knows the truth about bows. Brace height ect'" love my excalibur.
Thanks and thanks for watching
I also got free shipping from the Archery shop that took it in on trade and went through it! That's funny, I just read where you used to have a Winchester 94. I have one now for my General gun Hunting! We look a little alike too, but you have much more hair! Don't take any of this wrong, just a comment! Did a lot of research on crossbows and what you say makes a lot of sense! Thanks for doing all those great crossbow videos!
Good post season is coming!!!
Wow this is so much more technical that I ever would have thought.
Hey guys, I've been watching just about every video you put out since last hunting season in preparation for buying a crossbow myself for hunting. I just picked up a budget crossbow, Barnett Jackal. Not even close to as elegant as Mr. Bunjie but I'm excited to do some hunting with it this season and that's all thanks to you! Looking forward to some more videos this season!
Sounds great, I'm looking forward to hearing how you make out, so keep you posted. Really, good luck out there!
Well done friend 👍 I'm going to share this with my friends. Thanks for sharing!
Cant wait to see your next video. I just bought my first Excalibur, (micro 335), and I was thinking about buying the SDS for it. Cant wait to see the difference in the sound of yours.
Me either, the effect is still unknown as of yet. We shall see!
Oooh- I got a Micro 335 for next season too.... Really seemed to be the best bow on the market.
If I was shopping, that would be on the short list for sure!
Have you guys had any issues with the limbs on the Micro? I avoided it due to a lot of chatter about that on the introwebs. My 2018 Bulldog 330 Suppressed shows up today!!! I used to have a Pheonix... so it will feel small to me. I test fit a few bows at the shop before buying. I did like the tiny Micro tho! Thing is sweet
Well said bud totally makes sense about the height ill check mine when i get home tonight loved the vid learned lots from it god bless you buddie have great day and can't wait for more vids of crossbow stuff
Cool, thanks for watching as always, Chuck!
We keep the servings on our excaliburs that have the mark on rail just on inside edge of mark which is about 3/16 from bumpers.
This does not tear up rubber as much !
We sand the mark so it does not wear serving as much!
Also BOO over on excal forum has info on how to sand and smooth the trigger claws so your servings will last a lot longer..
Micro excal eat string servings unless you smooth claws.
Put nothing on servings,no wax etc as this softens it .no rail lube on rail as this will get on servings.
I use silicone spray on rail and wipe it dry !!
sproulman1 Firstly Great Videos Mr. Bunny, it seems that I also have trouble with my centre serving. It seems to chew up the bow string after approximately 20 shots. I own an Excalibur micro. Any suggestion on a remedy, I just read that sanding the retaining claws in the trigger will solve the problem?
Rich I longer do FB so I always look forward to your videos here on YT and this one didn't disappoint ... thanks and keep 'em coming!
I know what you mean about the Facebook. LOL. Thanks for watching here!
Man you gettin not enough likes. 118 likes with 2000 views? The hate is strong in people...lol another superb video. Liked! Stay healthy and keep em videos comin.
I shall do that, thanks for watching!
I think what could be happening is people are binge watching these videos and forgetting to hit the like button.... I know I forget 😮
I had horrible creep with my matrix 355. I ended up getting so frustrated with it that I contacted Boo on Excalibur forums for a custom string. What a game changer! If anyone is having this issue check him out, best $65 I've ever spent.
Glad your back. I have missed your videos
Thanks and thanks for watching
Nice drone video!
Always good information from you, thanks! I never even considered the brace height might be changing. Now I have one more thing to keep track of.
It never ends LOL
Sir what a great video !!! In layman's even !!!! I am researching as much as I can to be knowledgeable as possible when I buy my first crossbow !!! ie: Excalibur or tenpoint which in my eyes Excalibur is going to get my nod. One of the Reasons being the point you made about adjusting your brace on the crossbow the Excalibur can be done by yourself as the tenpoint you would have to bring it to a shop to do !!! If you always have to bring your crossbow in for tuning all the time could get costly !!! Thanks for putting this out there !!!
There are benefits both ways, try them out before you buy one and good luck!
Awesome first time I ever saw you not do an excellent intro. Rare. Lol
Great points. I need to get mine out and do some practice because last season late I picked up some new bolts and tips so I need to get me some ready.
Season will be here before you know it! Thanks for watching Calvin.
I always enjoy your videos, thanks for the information Rich. Looking forward to the next one.
Should be back on regular schedule now
the left limb on my micro supressor 355 broke... the arrows that come with it are TOO LIGHT everybody learn and take heed you need at least 100 grain inserts in your arrows. Micro suppressor has 16' bolts. so I bought 18 inch excalibur diablo (easton carbon) arrows cut them down and glued in 100 grain brass inserts. the end result is a 16' bolt same as stock but heavier.
Thank you for explaining that! I love your videos. I love my Excaliber too.
You're welcome thanks for watching
Yes.....very informative....Like the use of the drone over the Kingdom of Bunjie.....⭐⭐⭐⭐⭐.....😎
Glad you like it thanks
Just got s micro 355 ..thanks for your info..
Used a parker tornado..with them going out of business..no warrenty..just a backup!!
You got a couple of good ones by the sounds of it good luck
Great information, I finally got my new ex-caliber. It is a matrix 355/360. I do think the brace height needs to be adjusted on it. The string is actually touching the rubber dampeners. So I will have to buy one of those strings that I can cock the bow back with to take the actual tension off of the main string so i can twist it a few times to adjust the brace height. Thank you again for all of your helpful information.
Good luck, sounds like a plan!
I had no idea , good info . Thanks bud.
Thank you for watching sexiest man alive lol (your latest video for anyone wondering why I would say that haha)
Death by Bunjie 😂😂😂
You may have convinced me to get a crossbow this year, but I still blame myself for listening to you.
LOL, I got a kick out of that, thanks and thanks for watching
Another very helpful video, Thanks Rich
Glad to hear it thanks for watching
Bunjie is back!!!
Oh, yeah!
Nice vid keep up the hard work!! Hopefully you have a nice deer season!!
Thanks looking forward to it
I go by the center of the string measuring brace height.
Who gives this a thumbs down? ha. Nicely explained thanks
Great video! Well explained.
Thanks and thanks for watching
very very interesting and enlightening..thanks a lot!!!
Glad you liked it, thanks for watching!
Love your videos sir thank you
Great video, Rich. I definitely learned something from you on this one.
On a different note, I'm curious what you think about Velvet antler hunting. In Tennessee, they are opening one weekend to hunt during Velvet antler period about a month before deer season begins.
It's archery only, private land, buck only and is to provide hunters the opportunity to harvest a Velvet-antlered buck.
I'm going to hunt it only for the early opportunity to hunt (August 25 weekend). I don't really care either way about a Velvet rack personally.
You always have a good ethics perspective in your videos and your thoughts would be appreciated (video or otherwise)!
Just heard about that in a podcast today! I love the idea and would love to have a nice velvet rack on the wall. The only velvet Buck I've ever shot was in Maryland on my first trip down there. Don't have a lot of experience with it but it was a special memory. Good luck if you get out! A good topic for down the road.
love youre michael schenker shirt!! i,v got his autograph on my arm tattood :-)
Glad to hear it, I've liked him since high school. Good stuff.
Yep awesome!! Q, i,v got a recurve crossbow Sabre Saxon that i own from 1994. At the moment the limb in the middle is splintering. The limb is made from glasfiber, what,s the best way to fix this? thnx Anno Netherlands and stay save!
Rich you know how much I love your videos and your detailed Analysys, but this is too much Techical detail for me! Would love to see you to a video on arrow accuracy and broad-head accuracy
I know what you mean, I like to simplify things and not get so technical. The next one's worse LOL. But will be back to good old simple crossbow fun in the near future. Good ideas, thanks!
Tank for this vidéo
I see what you're saying but If a recurve bow has a draw weight of 50lbs at 28" and 60lbs at 30". Doesn't that mean that the draw weight is increased with a longer brace height? I mean, this should apply to crossbows too right?
You might have already done one bit pros and cons of compound vs recurve crossbows
Great idea!
Another good vid....
Thanks and thanks for watching!
Thanks
Good job
That was different to learn .
Always something isn't there, thanks for watching
I tried to quiet my bow with excalibur’s sds but it wasn’t much different and it slowed it down so I took it all off ... be interesting to see how you get on...👍🏻
I had mixed success before and that is why I bought a decibel meter this time. I look forward to it, too. We shall see!
👍🏻👏🏻👏🏻👏🏻👏🏻 you are a good boy my friend
Awww thanks
Hey finally recieved my crossbow after shooting it was pleased but very concerned as mentioned in earlier coment on another of your videos i have mostly hu ted with verticle bows and recurves at that my question is have you found a sweet spot on brace height to reduce noise.... from a traditional archers stand point we start silencing process by adjusting brace height to within reason of course. As a trad archer of 30 plus years my first shot with the matrix 355 sounded like a couple 2x4 being slaped together in a public library lol aftet reading the owners manual i discovered the brace height was indeed below recomended manufacturer measure once corrected i noticed some noise reduction not alot but was considering playing with it before adding air brakes string silencers ect
It made a difference for me, but not a lot, also. The air brakes I think made the most difference. I've done videos on quieting the crossbow you can check out. Also check out this one on brace height. I hope that helps! ruclips.net/video/lwTpXs8jmGg/видео.html
Ok I shot my new arrows at my new Morrell bag target everything is great at 20 yrd s...need to shoot further...back in the spring a limb broke on my matrix sent it back,the factory set it for me...my string has stretched that it hits the reds...im not moving it off the REDS IT is shooting so well...love all my Excaliburs and the service but I'm leaving everything as it stands now...string is almost on the REDS but dang it I'm not chancing snything
you're fine as long as it's not laying on those reds
Death by Bunjie the string isn't hitting the REDS but almost I'll keep watching it
Is August to late to plant a food plot ? It’s too hot here in Michigan- I am afraid it will burn up.
Probably best to plant early August to avoid heat and dry? Look up your early frost dates and count.back 90 days, that's when to target for fall plots, good luck!
Great video! Any idea why my exbows change point of aim from season to season? When I check POA on both of both of them at the beginning of each season they both have both have always shifted by a few inches from the past season. I always figured it was the cause of “string stretch”?
Most likely that's the case, if you have a compound crossbow it could be the cables too which could affect your timing.
@@Deathbybunjie both are compound Xbows. One has had the complete front limb set, wheels, strings, and and cables replaced. Been shot about a couple dozen times since replaced around 9 years ago.
I have centerpoint sniper 370 crossbow it has string dampeners and the string sets back further on the rail
Those are good crossbows, good luck out there
Thank you and good luck to you, Changed the scope was on the small side so I put a 4x32 truglo on it
Isn't proper brace height pretty much dependent on the persons stature? When I sit in my hunting chair, my sitting height is different than someone who's 5'6 while I'm 6'2
Not really, I think brace height is more crossbow specific than having anything to do with you or your size
So how far does the string move back with one full twist of the string?
It's going to vary by string, one Twist on a 36-in wide limb is not the same as a Twist on a 25 in wide micro series Excalibur or a Twist on one of my compound crossbows that are smaller yet, I'm betting
Great video as usual!! I have a question though... I have an Excalibur 380 bulldog crossbow and I realized that the string is closer to the riser on the left side than it is on the right side. In other words, the string seems to be on an angle if you look where the riser mets the rail. Why is this happening and what can be done to fix it?
Check and make sure your limbs aren't failing, that one of them doesn't have a crack or something? And make sure everything is bolted down tight. I suppose if something was loose it could be cockeyed. I really don't know what would cause something like that. I doubt it is the string. Perhaps have a shop look at it? Please let me know what you find out, it would be good information to have and share.
@@Deathbybunjie Cool!! Thanks for the reply and when I get it sorted I will certainly let you know the reasoning why. Keep up the vids as you are a very educational man for people who are learning about crossbows and all of the ins and outs... Greatly appreciated all the way from Montreal!!
Question? I have the Matrix Mega 405 with the REDS system.......should my string be touching my REDS shock suppression system while at rest?
Probably no, Google "excalibur string and brace height guide" and it will tell you the proper measurement, it's a PDF so I can't post it here. But you want 1/4" or so off the bumpers (assuming still within the recommended brace height). We talk about a bit more in this video here around 16:00, I hope that helps! ruclips.net/video/gqHmRVQwr-8/видео.html
Are you still satisfied with your crossbow? Would you consider a crossbow with cams? Do you have deer jump the string? I like the idea of recurve crossbow but sound of a recurve is loud and I'm concerned about still jumping.
String jump....LOL
Watch my quieting video that helped a lot IMO. I love this xbow and no reason to upgrade. Never lost a deer due to string jumping, although they can drop a bit. 10th season with this xbow coming up. Will do a "birthday video" about it this year but I kinda just previewed it lol.
Dan,putting nothing on servings!
Use silicone on rail every 20 shots wipe it off do not let it wet on rail!
Micros tear up servings..
Get a FF string from vixenmaster he is on paypal .036 angel majestic.
Yes polish the claws go to Boo excalibur he has hoq you do it!
Good luck!!
Hey Rich, I just put a new string on my Excalibur Vortex and cant get it to go even near the required Brace height, recommend is 1/2" to an 1" brace height from the riser, mine must be between 2 to 3" Its well past the last notch in the riser. I tried twisting and untwisting string but neither worked! Any advice would help Thanks
Are you sure you're measuring it right? Not to be funny, just making sure. Can you Facebook me a picture of it? And have you shot it the way it is?
Sounds like your string is to short for your bow would be my guess
How many shot do you think you have taken with Bunjie?
The answer to that is in my upcoming book, check back in August lol
i have a Matrix 405. after installing new string , my brace height is approx 1 3/8 inches. the chart calls for the brace height to be between 5/8 and 1 inch. There are no twist in in the string. will the string stretch and will this have an effect on accuracy. new to crossbow hunting and really like your videos.
Yes stretch and brace height can affect accuracy, keep measuring and testing and shooting and you'll be fine i bet
which way do you twist the arrow for up or down!?
Maybe this will help? ruclips.net/video/lwTpXs8jmGg/видео.html
i notice you dont have any string stops on your axiom is that a 305 lbs?
I do have bumpers now, its 175lbs but up to 305 fps, yep...that's Bunjie!
I see you don't use string stops doe this help with accuracy?
I have bumpers on now but I don't think that affects accuracy, just sound.
How do you make mark for the brace height if the rail is black an aluminum? I don’t have anywhere I can make a mark to make sure the brace height is even.
Black marker on the side of the rail?
Death by Bunjie my rail is black... lol.
Try a silver paint marker
Got a question rich I was trying to get my string to be in the lines by twisting it is in setting about an half an inch pass the last line towards my scope I twist it and it gets closer to the scope am I doing something wrong I shot it at 10 and 20 yards seems good should I leave it and not worry about it
if accurate you're probably okay. TIGHTENING the string should bring it TOWARD the scope (INCREASING brace height), check with manufacturer or owner's manual for proper brace height, i hope that helps
so do you adjust brace height by twisting string
Yep!
I bought a compound crossbow last year came with scope that is no to my likeing to many yardage hash marks 8 I think. to close together. do you have one you would recommend ?
Doing a video on Scopes soon. I will mention this. I'm kind of in the same boat you are. Faster bows these days and Scopes these days tend to have more reticles. Unfortunately, no suggestions as of yet.
I have the same crossbow what is your brace higth on your axiom?
I just keep it just off the bumpers now because I added bumpers
Great tips Rich .
I have a question .
Have you ever done any work on the trigger to smooth it out.
I have the same bow, and the trigger is not smooth at all.
I think that the shots would be much more accurate if the sqeeze was smoother.
Triggers are difficult on crossbows because they are holding back so much force. I like my trigger but keep in mind I'm transitioning from a model 94 Winchester 30-30 haha. I will address triggers down the road but that's a topic that I will need a shop for. I have not done anything to my trigger.
I just bought a Excalibur-Axiom-SMF-Crossbow-w-scope on Ebay for $225. and I have your great videos to blame! I can't wait till it gets here! My first crossbow. Any Ideas for a name? Thank You Very Much!
I only know one name and it's taken LOL. Seriously though if you're going to name it, think hard and pick a good one. Something personal. For what it's worth I still love my Axiom. Been saying that for years. There are so many different nice models out there. You almost can't go wrong. Good luck and keep me posted on how you make out! And on the name!
Or you could try this: www.fantasynamegenerators.com/bow-names.php
All hail Whisper! Thanks to you and www.fantasynamegenerators.com/bow-names.php I am a Stroke survivor so I was led to the Axiom from your great videos and above by the right deal at the right time! Thanks
Yes, I wanted the Matrix 380 or so I thought until cocking a Axiom. All review videos of the 380 were very quiet! I would have had to get the cocking device so your speed video really helped me decide. Here in central Florida there aren't many long shots with the WMA's being so dense anyway. I was thinking the Matrix 380 could make a 10 or so yard longer shot. But, you also have a great video on long shots! Thanks for the great videos! Ever think of starting some kind of nation wide crossbow club? Thanks again and we all Hail Bunjie!
I only have one scribed line on my Mega Matrix 405. Now I'm confused. Me: rookie 🙈
Consult your manual, manufacturer, etc., but that one line might indicate that's where it's supposed to be. Stay close to that? Good luck out there!
It turns out that the scribed line is "minimal" brace height. You always want to stay behind it. 1/2" or so...
11:45 terrible. I mean that was a scrawny doe.
😅
good advice.