CD4E Transmission - Broken Parts - Torque Conveter codes
HTML-код
- Опубликовано: 13 сен 2024
- CD4E Transmission Valve Body Repair Kit Installation, Transgo CD4E Jr.
This kit will take care of the most common issues of this unit. Broken parts and torque converter code are the most common.
Excellent demonstration. I wish there were this level of quality of videos for all the Transgo kits.
Hello, I am 56yrs old and grew up in the automotive service industry. My dad owned a big shop in the LA area. I have worked in the industry entire life. You Hiram, you sir, are a automatic transmission genius!
You are awesome Hiram.. as a former master auto tech (focused on engines & troubleshooting) you helped me greatly with my personal Tribute trans rebuild with your outstanding videos sharing your knowledge with the world.. Thank you for doing this.. I'm sure you have helped more than you know.. had the kit sitting next to me as I watched & learn to feel good about installing it with my rebuild.. Will never forget your master trans skills Sir..
***** thanks for your videos, I am neither a mechanic nor a car guy, actually just got my drivers license last month, however I really like your videos and I am really inspired, must say amazed by your knowledge of the transmission. I have almost seen all of your videos but I couldn't see anything tear-off or rebuild for CVT or manual transmission. I hope if you get a project of CVT. Or mt you will share with us.
Stay blessed and happy.
Ford CD4E / Mazda LA4A-EL is found on Ford Contour, Ford Telstar, Ford Probe, Mazda 626, Mazda MX-6, Mazda Tribute, Mercury Mystique and probably a couple other models. It was Ford and Mazda's main unit for automatic transmissions from 1994-2002. It was still available after 2002 for some models but it began phasing them out in 1997. Thanks for the mention Hiram. :)
I was wondering if you know what my problem was I have a 05 Mazda Tribute 3.0 automatic all wheel drive when I go to stop the car continues to pull and stall. It is almost like in the torque converter is locked up wanted to know if you had any suggestions thanks
I think this was for the 4 cylinder Mazda MX6. The v6 has 4EAT transmission
Very well done! I've watched several of your videos and have SUBSCRIBED ! Excellent channel !
Thanks
great video, really enjoyed you sharing your expertise and knowledge
Great and helpful video on this transmission, I'm planning to do just a shift kit installation since my transmission works well and plan on keeping it like that, it's the easiest and cheapest way I presume.
Hiram thank so much for ur help never thought I could do it but 14 thousand miles later yes sir 4l60e an well now out Mazda cd4e on the table wouldn’t do it any other way still watching your videos and thanks again
Hiram, you rock. You are a good instructor. And Great Videos! They've emboldened me to rebuil my Tribute's CD4E! One tiny suggestion tho, you might want to rename this one video to something including "Valve Body Shift-Kit Install' or the like...it was hard to find. Thanks again!
Agreed. This video was hard to find. Title should be "CD4E Shift kit install".
Here is the topic on Mazda626.net dedicated to Hiram's CD4E/LA4A-EL rebuilds. mazda626.net/topic/43360-hiram-gutierrezs-cd4e-teardown/ There are so many people out there that would like to say thank you for these videos. Even if the average DIY'er doesn't have the tools or means to do this job at least we can see it done and appreciate the work involved.
Great work man! Fun to watch, keep 'em coming.
hi hiram great videos, i wonder if you could make a video how to adjust flare and bumps on 09g valve body after i cleaned it up still feels the issue 2-3 bumps sometimes i switch solenoids same issue. thanks hiram and god bless you.
Muchas grasias por conpartir tu sabiduria, el Señor Jesus te bendiga
Got this trans on 05 escape. I'm starting to feel some bump in 1-2 shift also a bump 2-3 shift under slow accelerations. But is fine when I take of at a faster pace. Would like to fix it before it gets worse. Was gonna put some Lucas in it. Watched all your videos on this trans. Thanks for taking time to make them.
Noticed that one of the gaskets didn't come off cleanly. What do you recommend for cleaning that up?
hey would you by chance have a video on how to remove these transmissions easily without a lift and only a jack?
Gracias señor por su tiempo y sus experiencias
Great videos on the cd4e, I have a 2005 Escape with the V6, transmission performs flawlessly but for one thing: A "flare" shift between 2nd and 3rd gear.
The transmission is currently in the car, the check engine light is NOT on.
My suspicion is a sticking 2-3 shift valve.
The problem didn't come on slowly, just one day it was there.
I bought the car used, and was probably the first to drain the pan and put in fresh fluid at 180K miles. The old fluid was dirty, assuming friction material, but now seems to be maintaining its red color.
I'm leaning towards leaving the transmission in, pulling the pan, removing the valve body, and getting the valve unstuck (if that's the problem). Or maybe just replacing the valve body entirely.
Before all that though, maybe a can of Sea Foam TT-16??
Any ideas you have would be greatly appreciated, thank you!!
98 Contour V6. When CD4E is cold shifts weird 1-2 after 5 restarts of the engine roughly 10 mins apart, shifts like its flawless. When on highway TCC stuck off, P1744.
@Hiram Gutierrez Thank you for all you do for us mechanics that have some background on transmissions but need a little guidance. I have one question on the CD4E I have a code of P0734 incorrect 4th gear ratio What are the common issues in a CD4E with this code that I can check over? Thank you in advance Brett.
Thank you for keep showing inportant videos , You are good, Do you have any video that show how replace pack selenoids, or how to improve the pressure of the valve body. In the mornings it is neutralized for a minute and then applied normally, on trans ford explorer 98. I repared the transmission 4 months ago and was failure valve body. I'm sorry. I don't speak english very well. I am on Venezuela. Thank's.
I know this video is 8 years old however I am attempting to fix my 06 tribute. I had slipping from 2to 3 snd over drive light flashing but no codes. I took off valve body and took apart and cleaned. I put back with screen in correct position and now car barely moves in any gear. Not sure what I did wrong. Was working way better before I attempted to clean it up. Any ideas?
Thanks for the video
Good to see a new vid,where you been?
great video I couldn't have done it without you I just installed the shift kit in my cd4e but the torque converter is still not unlocking in first gear and reverse when you stop what do you think
Tengo una escape 2002 no suelta la 5 o O/D. Que puede ser ? Gracias por su tiempo muy buenos videos 👍🏻
What code did you get to determine this fix?
Eres pipa vato. My 08 escape wont go into reverse. I took the pump off and its not the 2 4 band. Bless me with some knowledge sir if you see this. What can I check?
Hi Hiram quick question here, planning on doing a full overhaul kit on a 2005 Escape FWD CD4E soon do you recommend doing the shift kit or should I bypass if the trans wasn't giving any of the issues you outlined?
Not sure if you are still checking comments on this, but I have an '08 Escape LTD AWD that is leaking about 1/2 cup of Tx fluid every few days. I put a new band in it last year (broke) and it's been OK. I am wondering if it is valve body pressure. I see the kit you used in this video, but not the seals. Do I have to buy a full rebuild kit or what do you recommend for seals for this repair? Thx!!
hi
Hiram looking for information about rebuilt CD4E I see you use the transgo kit.
Should I also change the Sonnax 2-4 accumulator piston kit?
Thank you.
@Hiram Gutierrez Hello Hiram, what would you suggest I do first on a cd4e with low line pressure...I have roughly 10 percent of requested line pressure. When cold car will move briefly but with any warmth at all I lose all drive forward or reverse. I'm a mechanic myself but I don't often deal with transmissions. I really enjoy watching your videos and I'm glad that you do them, Thanks
Hiram Bernard Hays III did you ever figure out what it was?
hi Hiram, thanks for share your experience on the transmition, my question this kit fix the code P1747?
Hiram el video de la transmision CD4E no lo tendras en español
luis enrique grin vargas seria de gran ayuda
My wife is working on one of these cd4e transmission out of 99 626 and she is trying to determine if it is a good candidate for this shift kit or if the transmission is too far gone and needs a rebuild as well. Do you have any advice you could give on this?
What makes the V6 Mazda Tribute transmission different from the V6 Ford Escape in the 2003 model year? Also what is different between the early Mazda V6 trans thru (1/27/03) and the late version after (1/28/03)?
Hn una pregunta cuantos litros de aceite yeva esa transición??
Hiram, I have a 2002 Mazda Tribute with a hard Drive to Overdrive shift. If you turn the Overdrive off the Transmission works great. Do you think installing the shift kit might fix my problem or do you think the Transmission is already damaged?
hiram tengo una de estas en una mazda tribute se reparo la trasmission completa todo nuevo convertidor y todo y no quiere cambiar y la luz de O/D flashea me dicen que cambie el solenoide es probable que este dañado? y como puedo probarlo?
Excelente podrías dar el armado y desarmado de la caja CD4E en español gracias.
Hi from the UK.
I have got oil in the harness connector socket on top of the box.is this normal as I'm having intermittent issues like hunting for a gear and sometime failure to shift.the car is a ford mondeo
CD4E on '01 - '07 Escape and Tribute(if yours is automatic this is what you have G5M is the manual trans) goes out so much there should be a factory recall.. Seriously I've never seen one get past 150k(best case senerio) without needing at least a valve body rebuild.. Most shops will charge you for a tranny swap even if they just rebuild valve body, and that's around $5,000.00.... Shade tree mechanics will do it for about $3,000.00, and just buying a refurb w/solenoid with lifetime warranty and self-labor is $250-$500.
It has nothing to do with maintenance either.. I did factory intervals with Max Life Mercon and filter kits and mine went out at 145k.. Most people it happens way more frequently.. I suggest self labor and a lifetime warranty rebuild, or take your rebuild to a trusted mechanic and have them install..
You did filter replacements on a trans that needs the case split to replace? I don't buy it.
Mr. Gutierrez can coolant get in this trans?
THANKS FOR YOUR TIME.
I have a 05 Mazda Tribute with a 3.0 automatic it feels like my torque converter is locked when I go apply the brakes it keeps pulling forward and tries to stall out if I hold the brakes on to long. what would be the cause of this problem?
Good vid !
Muy bien quisiera este vídeo en español
what the valve body torque specs?what the transmission pan torque specs?
thank you...
That ain't like you to leave the outside of a transmission case lookin dirty like that Hiram. Is the case washer is broke down right now, or is it just dis-colored to the point where it won't come clean?
I figured it was either dis-colored in a way that wouldn't come clean, or your case washer was broke down and you had to clean the case by hand. True about it being really important that the inside being clean.
The shops coming along real nice now. Almost got my teardown table done and it's lookin a lot cleaner and more stocked with stuff than it was.
Hiram i have 1998 accord, have trouble shifting hard everytime i shift. can you give me some clue please
I rebuilt my escape transmission about a year ago. I put the shift kit in new clutch drum, bushing, bands and clutches. It worked great till last weekend. While driving i noticed a little flare from first to second . it happened a few times more on the way home then all the sudden it would not move. I turned the car off let it sit for a few minutes put it in gear and for about a minute the car will move till you let off the gas then nothing. if you turn it off let it sit for a minute then it will work for about a minute. it is like it is running out of transmission fluid. do you have any idea what happened
6 years later...I think you have a clogged filter like me. Did you ever fix?
Ford CD4E- if I pulled out the pump on the vehicle to change the band and then everything fell out is it possible to reload it through the pump side, please amswer.
I've tried that and wasn't successful. It slides out to far to be able to reset the friction plates.
i'm looking at a 06 3.0 v6 lxt escape. owner says he had this job done to his 4wd system and a while later he just lost all drive completely, when overtaking someone. "as if the gearbox just dissapeared".
only fault code is for the TSS sensor.
I'm gonna buy this car if the repair is cheap.
any ideas of the fault?
Find anything out about this? I]'m having the same issue
Hiram Would this fix p1744?
any idea on a p1744 code?
Buenos días tengo un problema con la transmisión que me falla en la segunda velocidad deslisa y tengo que soltar el acelerador para que pueda cambiar la segunda velocidad que podría ser la falla por favor
+Heiny Escola La banda puede estar quemada.
Muchas gracias por el Vídeo me podrían enviar una copia del mismo en español estoy aca en Colombia ,se lo agradeceria mucho
Ford Contour?
Yes and Ford Contour
Do you fit a shift kit to all your rebuilds? Do manufacturers do this as well with the factory rebuilds? Thanks for the video.
Thanks for your comments. So I understand from this that an old CD4E valve body will be a little worn and the kit will compensate for the ware and make it last longer than it originally did.
Amigo muy bueno el video me puedes en viar en español te sigo desde Ecuador
⭐️⭐️⭐️⭐️⭐️👍
Mazda mx6 94-97
Anyone here knows how to get the transmission fault codes on a 94 mazda mx6 automatic transmission ..mine has a hold light flashing putting on drive the car doesnt move unless playing with my throttle revving it up and it moves then hold started to flash
I believe it has cd4e transmission
I've 2 valve body 09G to sell (TO REPARE). Anyone interested?