3D Printed 8th scale ford focus rs part3/how to Print super clear Transparent / Scale Addiction

#ScaleAddiction
8th scale file👉 : cults3d.com/en/3d-model/game/...
10th scale file👉 cults3d.com/en/3d-model/game/...
Resin Washing basket: www.thingiverse.com/thing:480...
In this video i will show how to Print super clear Transparent and how i 3D Printed 8th scale ford focus rs in 8 sections which i did in part 1,2 , if your 3d printer bed big, you can print it in less than that, the 8th scale ford focus rs 362mm wheelbase and 308mm in width and also the stl file available in 10th scale 262mm wheelbase and 200mm in width and also i will show a parts how to design printable model in SketchUp,
this is an easy way to make rc car scale body(shell) at home and painted it however you like
🔔 Hit the bell next to Subscribe so you don't miss a video!
Follow my Instagrams so we can be best friends
-------------------------------------------
/ wheelshobby
/ alimechh
Like my facebook page:
-------------------------------------------
/ scaleaddiction
**If the video was fun, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
For contact
email address: [e-mail]
Facebook account : / ali.hoshyar.. .

[@richarddangles8896]

I've always wondered how they make the transparent lights. Thanks for the video

[@scaleaddiction]

Any time!

[@tomb816]

Just for some info. If you print w/ the clear filaments (my favorite so far is Matterhackers PETG), your best bet at "clear" parts is:
a. Single walls are going to work best
b. Sand the part, thoroughly, post=print
c. Spray with a high quality (all the store "spray cans" I tried turned yellow) clear coat (I use a 2 part, automotive grade, clear coat.

[@PaintedMessiah]

Wow this is game changing, nicely done!

[@scaleaddiction]

Thanks man

[@genemaster74]

G'day ol son,.....cheers for the insight on how to clear lens🤔...the guys in the crawling club are gonna freak out🤯 when i turn up in my landcruiser LC70 with all clear lens on my fully 3d printed RC body😁. Ones again cheers m8 from Downunder🙃 (Australia)

[@user-sm7wx7jk1q]

Congrats mate amazing result !!!

[@scaleaddiction]

Thanks a lot!

[@CMBProjects]

Amazing!! Looks very professional

[@scaleaddiction]

Thanks, appreciate that

[@Creative_Electronics]

Really nice done ;-)

[@scaleaddiction]

Thanks creative Electronic 🙏🏻

[@vipiniv2996]

That is one great work..

[@scaleaddiction]

Thanks ✌🙏🏻

[@qpidrc9454]

Great work Ali!!!

[@scaleaddiction]

Thanks

[@nabilmhamad9289]

للمرة الرابعة بشوف الفيديو 💚
انت مبدع ✌ استمر💚
للأسف الحسرة بالقلب 😢 لأني ببلد معدومة ما بتسمحلي اتبع شغفي.. حق الطابعة بحق بيتنا 😭
بس عندي شغف رهيب بالسيارات المصغرة.. بشوفها عالنت وبتحسر 😢

[@scaleaddiction]

شكرا، اي واللة حقك 🙏، انشالله فديوم

[@NeverStopRc]

Really good 👍👍

[@scaleaddiction]

Thanks

[@bernard9399]

Awesome your channel is the best. 3d printed bodies are so detailed. I love you car bodies. but tell when vid with mitsubishi body ?? I want to print body for 1/8 car and i picked you couse you are the best. I know its difficult and time-consuming but can you design nissan skyline in 1/8 scale or some other jdm car in 1/8 scale? Love your work so keep going. Leave

[@scaleaddiction]

Thanks man, lancer video will be next video for sure, after that I will be working on 10th scale skyline r34, I might put the 8th scale file as well, but not sure for now

[@poofn]

You should try making a classic muscle car like a 69 nova but with an off-road spin to complement the c10 and mustang

[@prasadkumarm9670]

👍👍super

[@scaleaddiction]

Thank you 👍

[@dennismurphy3076]

Hi Ali.
Do you have the Stl. Files for the front and rear lights covers/lens. Would like to make a form from them to mould plastic covers.
I downloaded the 1/10 scale just the rear to print the the prep work.
Thanks you for the model and the tutorial.
Amazing channel.

[@scaleaddiction]

Yes, already added to the 10th scale as well

[@nabilmhamad9289]

Good job ✌

[@scaleaddiction]

Thank you so much 😀

[@sjschauer4235]

YOu just changed the game for me, I need to get those clears/sealers you used.

[@scaleaddiction]

That's awesome, glad it helped you

[@AxlMetcalf]

What’s it going to cost me for you to print a set of them lenses? I have just acquired a 1/10 version of this and I am in need of those

[@bonedigggss]

That ebrake slide had me lol!!!

[@scaleaddiction]

Thanks man, 😅🙏🏻🙏🏻

[@XxXdanmanXxX14]

How thick are these lens models? I don't have a printer but been trying to have a file printed from an online service and they say its to thin. Like yeah I dont want it to be super thick

[@makewithmegma]

💕🔥👍

[@scaleaddiction]

🤜🤛

[@makewithmegma]

@@scaleaddiction ❤👍

[@dennissantiago3271]

How would've the ones you washed in ipa came out if you cleared them in 2k

[@HerrHafiz]

what is the blue tin one?OK ? uv protector? the 2k ms clear coat is oil base or acrylic pu?

[@scaleaddiction]

Its 2k clear coat, it come with hardener, it used for painting full size cara

[@nabilmhamad9289]

Great 💚💚💚💚💚

[@scaleaddiction]

Thanks

[@nabilmhamad9289]

يا أخي معلم 💚✌ٱحييك

[@scaleaddiction]

شكرا ✌

[@OskarKopecky]

First

[@luc1f3r0_mf7]

i wonder if this can be done at a large enough size for cars

[@scaleaddiction]

yes, if you have large sla printer

[@johndenver1989]

What type resin are you using and what those products name?

[@scaleaddiction]

It was dental clear resin

[@MicheleDeSilvestro]

Can share the brand and code of the 2 resins used ?

[@dennissantiago3271]

Can you spray the clear on instead of dipping

[@scaleaddiction]

Yes u can

[@Iamavermis]

É só passa a resina usada, que fica transparente

[@jrodt9]

Do you offer a full course on making this 3d car?

[@scaleaddiction]

No, bc there is so many videos on RUclips, for sketchup tutorials

[@The_Duggler25]

Seriously wheres the best place to go to get a 3d model made and printed. I dont have any access to a printer or anything and been looking for a few months now. Trying to get a 2021 gmc or chevy 3500 body made for my cen racing DL series. The ford f450 body is nice but not a ford guy..... at this point feel defeated

[@Ericevijayohiani]

Pls how do you calculate the dimensions to real car size

[@rodrigoalvarez1712]

Another 8-min clickbait video that can be summarized in 3 steps: print, sand, clear-coat.

[@molotovgod]

Another trash person on the internet. The video was not about printing it's part of his series and showed how he did it for his model cars. I didn't hear him claim anytime during the video he knew the only way to do it, he never said, he was a 3D print RUclipsr. Love how you like to make things up in your head.

[@rodrigoalvarez1712]

@@molotovgod read the title: how to print…