Just to pass on something I learned about Superclean, in the concentrated form mixed with water, in a sprayer will remove layers of skin from your hands (wear gloves) it will also discolor (yellow) painted surfaces if applied in the sun on hot surfaces. It dulls polished Alcoa Wheels (acid) and if it's left on too long it will remove paint, I learned this washing the exterior of my new Cargomaster trailer, to remove the lot rot, gray rain streaks from the sides. Remember, if your hands are itchy and burning, you're losing skin! Love the content, keep em spinning!
Would be really cool to see you do more flip projects mate, you and the guys have the skills and the facilities to do it easy and would be far more positive and productive content than the destroying stuff. God bless you and the family and best wishes from the north west of England Jay 🙏🏻🏴❤️🇺🇸
Those Mercedes engines are awesome, great power, reliable but they do need regular maintenance. It's a good fixer uper! It does need some paint on that rusty frame but looks good for a starter truck.
The frame looks cooked from the rear of the truck. Both rails are rolled out. And I could be wrong but I’m pretty sure putting water in these things can cavitate the liners.
The super clean applied to the dry side of the hood looked like it stained it as compared to when you applied it to the other side after it had been watered down
Hey Bruce it looks like it's the foot valve, just check on the heal of it that there's no crap built up there preventing it releasing properly or that the pin it hinges on isn't tight before you go to the expense of changing it, I hope this helps. 😊
Those Freightliner Columbia cabs are real bad about clogging the radiator with dust. I have had 3 of them and we had to pull the cooling package and give them a thorough cleaning, on all 3, about every 2 years. I would love to come and help on some of these trucks. I live 2 hours from you at least until November.
Hi Bruce not a bad truck needs little work I think good profit off of it did I hear you rite you are picking up B-BLUE-C cool can’t wait take care stay safe G.Whyte
Bruce I know what it's like to Have Problems My Car Needs to be Fixed And I have Trucks on my truck Simulator Game That needs Repairs Keep Up the good work Billy Lizza Uniontown pa
When jumping you don’t hook up to 1 battery. Hook 1 cable to the first battery and the other cable to the last battery so you get all the battery power including the jump box to start the trucks.
I really like those mercedes engines. They have really good torque, great on fuel and its lightweight. Not much for horsepower stock but that engine has been used in race trucks in Europe. They sound really good no muffler.
I know freightliner get alot of shit. But I'd drive one with a 12.7 60 series on it. Easy to work on and can make 550hp out of them with tuning and bypass the biometric pressure switch.
I drove a Columbia for about 6 months before my International LT. Always iffy if the freightliner would would even even make it back. I prayed that it would burn. Total POS.
I had one of them b4 with that same engine they have 6 individual heads on them and the head gasket always goes out on one of the heads causing coolant leak pop that side cover off you can see which one it is
Might be worth taking the gifts out of that newer freightliner and putting them in your old cab over. Then it would have blocked in differentials. Maybe even the transmission if it's like an 18 speed.
You should throw the helm away as it is not safe to use anymore. The polystyrene inside shrinks as it ages and hence the exp date. Some one might try and use it one day so cut the straps off.
MB engines are super rare to not work, so its not problem with the engine itself. MBs are pretty much the world's most reliable engine, yea maybe because MB is the first automobile company that was made...
I didn't know helmets had expiration dates. Well all of mine are junk😂 it's OK I don't ride anymore .too dangerous for an old guy like me. Learn something new everyday.
Hey Bruce see the front headlights if you want them to look like new give them a good clean and spray clear coat on them in spray can It will bring them up like new
Bruce Is it worth your time to even work on it. I know you said it's a friends but she looks and sounds WELL Used up. Just sayin, your time is worth $$$$$
Just to pass on something I learned about Superclean, in the concentrated form mixed with water, in a sprayer will remove layers of skin from your hands (wear gloves) it will also discolor (yellow) painted surfaces if applied in the sun on hot surfaces. It dulls polished Alcoa Wheels (acid) and if it's left on too long it will remove paint, I learned this washing the exterior of my new Cargomaster trailer, to remove the lot rot, gray rain streaks from the sides. Remember, if your hands are itchy and burning, you're losing skin! Love the content, keep em spinning!
Would be really cool to see you do more flip projects mate, you and the guys have the skills and the facilities to do it easy and would be far more positive and productive content than the destroying stuff.
God bless you and the family and best wishes from the north west of England
Jay
🙏🏻🏴❤️🇺🇸
Those Mercedes engines are awesome, great power, reliable but they do need regular maintenance. It's a good fixer uper! It does need some paint on that rusty frame but looks good for a starter truck.
Could be a work truck, until his daycab 389 arrives. If he gets it o a Bruce standard and uses it, could do well with resale
Naw there fucking junk
You are literally the only person that thinks thoes are reliable..they kill the value of trucks and people usually stay away for good reason.
The frame looks cooked from the rear of the truck. Both rails are rolled out. And I could be wrong but I’m pretty sure putting water in these things can cavitate the liners.
The super clean applied to the dry side of the hood looked like it stained it as compared to when you applied it to the other side after it had been watered down
That freight train noises you hear is the diaphragm on the bottom of the air dryer sticking. Needs service or a new air dryer.
Hey Bruce it looks like it's the foot valve, just check on the heal of it that there's no crap built up there preventing it releasing properly or that the pin it hinges on isn't tight before you go to the expense of changing it, I hope this helps. 😊
Those Freightliner Columbia cabs are real bad about clogging the radiator with dust. I have had 3 of them and we had to pull the cooling package and give them a thorough cleaning, on all 3, about every 2 years. I would love to come and help on some of these trucks. I live 2 hours from you at least until November.
I seen you cruising up i75 in Georgia yesterday
Hi Bruce not a bad truck needs little work I think good profit off of it did I hear you rite you are picking up B-BLUE-C cool can’t wait take care stay safe G.Whyte
Bruce I know what it's like to Have Problems My Car Needs to be Fixed And I have Trucks on my truck Simulator Game That needs Repairs Keep Up the good work Billy Lizza Uniontown pa
If you want to engage that pto you have to push the clutch in, engage the pto then let the clutch out
You should check the front brakes
Best workhorses. Those 12.8 Mercedes benz diesels aee underrated
When jumping you don’t hook up to 1 battery. Hook 1 cable to the first battery and the other cable to the last battery so you get all the battery power including the jump box to start the trucks.
Somebody has already gotten the goodie out of that one. Lol
Man the camera guys laugh makes my day lol 😂
I really like those mercedes engines. They have really good torque, great on fuel and its lightweight. Not much for horsepower stock but that engine has been used in race trucks in Europe. They sound really good no muffler.
You should sign that helmet with a gold metal flake paint pen. It might turn up on Pawn Stars with the seller wanting $25,000.
"Let me get an expert" 😂
Love wen
That's a lot of money no I can't do that😅😅😅
The 12/12 inspectors sticker should have spoken volumes lol
I know freightliner get alot of shit. But I'd drive one with a 12.7 60 series on it. Easy to work on and can make 550hp out of them with tuning and bypass the biometric pressure switch.
Bruce check the right front break I you said it was smoking so your break may be hanging up up front
Looks like the rear brake adjustment is only traveling about a 1/4in I’d back off the rear slacks a little bit they seem adjusted up a bit tight
Power wash and polish the wheels that will make run better lol
I drove a Columbia for about 6 months before my International LT. Always iffy if the freightliner would would even even make it back. I prayed that it would burn. Total POS.
You will have a beautiful looking truck. Just put the other style of hood on it. They will work, me and brother did one and it looks great
Always major life motivational to me..... Salute , blessings to everyone grind and motivations....
I had one of them b4 with that same engine they have 6 individual heads on them and the head gasket always goes out on one of the heads causing coolant leak pop that side cover off you can see which one it is
Awesome video Bruce thanks for sharing, buddy 👍
You think you should've checked all the fluids before starting it and taking it home?
That was my first thought, specially in teh shit condition it was in
Use those axles for your pulling truck roll that challenge baby !
Seems like that super clean had a bad reacting to the sap or whatever residue that was built up on the hood and it ended up staining it
Might be worth taking the gifts out of that newer freightliner and putting them in your old cab over. Then it would have blocked in differentials. Maybe even the transmission if it's like an 18 speed.
Give away the freightliner 😊
So how hard is it gonna be to put those locking rears in the Pullin truck?
You should throw the helm away as it is not safe to use anymore. The polystyrene inside shrinks as it ages and hence the exp date.
Some one might try and use it one day so cut the straps off.
I thought the impact absorbing polystyrene goes hard over time which is one reason why they have an expiry date.
Did you ever have all the damages done by that custom shop fixed on the 389? Never saw a follow up.
I love the freightliner columbia take good care of it please
Hey Bruce what was the name of that spray cleaner you used there please mate ?
When bobtail only front axle brakes
Hear that noise 😂😂
So where did the guy that was walking to his truck disappeare to or did u make a clean cut in the video
A Mercedes 4000. Congrats on the boat anchor! 😂
Great video Bruce
I know a highschool band program that could really use a semi to pull there dry van. They have an old cab over that's seen better days.
What kind of Cabover?
@rcg4404 I think it's a freightliner I will have to check
@@joshgoss109 single axle?
You oughta make fixing trucks to sell a regular part of the channel
I wonder if the wheel bearings need to be checked or replaced?
Come on Bruce didn't you do a pre-trip on this
didnt you check coolant before you left isnt that one of the first things to check on a vehicle you buy
Man that camera man took his life in his hands when he walk in front of the tires while it was hung on the handler. Sketchy AF😅
Put a ton of seafoam in it bud
The title says it all
keep the clips coming
classic Mercedes head gasket
MB engines are super rare to not work, so its not problem with the engine itself. MBs are pretty much the world's most reliable engine, yea maybe because MB is the first automobile company that was made...
good old West Virginia tractor right there
Ok you win 🥇
# Ryan is the new boss now
Ryans name means little king 👑
Sorry Bruce 😂
Pulling truck #2 Build. You have 2 tractors. Why not
Something big is coming
Don’t those engines have a bad rep?
Id use those rear axles on the Pulling truck. Even though its a turd maybe it would be an ok parts truck😂
is it a mbe926 or what is the engine in it
Wanna see the servicing of this rig
You should get rid of the Junk 'N' Carry. Solar booster pac is where its at.
will it START!?!?!?
white collar is back!!!!!!! lol
Man I had a trk with a Mercedes Benz motor. I love the trk hated the motor. You couldn't give me one of those motors..
Trucks like this are popular here in the Philippines
YEAH!!!! MIGHT BE A BIG MISTAKE. NO WORRY,,,,, THE WIFE'S NEW HOUSE CAN WAIT!!
Purple power is what you need to clean it
Is 440 cb shop still in business??
I was wondering the same thing myself
You should go back to doing videos like your older ones, out on the road picking tracktors up
I didn't know helmets had expiration dates. Well all of mine are junk😂 it's OK I don't ride anymore .too dangerous for an old guy like me. Learn something new everyday.
How about making it a proyect truck???
Pretty cool 😅
Send it straight here lmfao
Remember! Good equipment never sells
Hey Bruce see the front headlights if you want them to look like new give them a good clean and spray clear coat on them in spray can It will bring them up like new
Nice man 👍
Use the axles for the pull truck!!!!!!!!!!!!!!!!!’
Yikes thats a mess good luck
don't cut the frame just do a axle swap
When we doing another project semi?
Should take the rear ends and put them under your pulling truck
Don’t sell it just get a new paint job and put some good stacks on there. Maybe make it a little bit longer.
How much do you want for the truck
Lol, he said in the video 10k as is
@@MrSelmo85 I did not know that the time he said it ok
I would say scrap the truck and keep the axles for the pulling truck
When is the 3G getting built?
Looks like ur gmc is back
Steal the axles for the pulling truck
What's with the zero resolution potato cam?
This dude doesn’t have a clue I wouldn’t buy a bicycle off him let alone a piece of equipment or a truck
On today's episode of will this P.O.S. start lol
What's that spray called?
Superclean
@@OntarioSecret thank you
You could turn that Freightliner into a burnout a vehicle
Tim Gentry would know what to do with it
Cut it off and use it for the pull truck, and part out the rest
I now some guys who make beasts out of those things
Bruce Is it worth your time to even work on it. I know you said it's a friends but she looks and sounds WELL Used up.
Just sayin, your time is worth $$$$$
Part it out, take the rears.
Your gonna do what now to those batteries