Yes, the rear knuckle are made from cast iron but it is a certain alloy, which is quite easy to weld. There are certain cast iron alloys, which are really hard to weld.
Do you happen to sell the whole assembly, I have an S14 which I need to install the rear Z33 Brembos from a 350Z and I can't seem to find a solution apart from machining
Du meinst R34 GTT ? Grundsätzlich ja, ich müsste nur mal den hinteren Achsschenkel haben. Eventuell ist der hintere Achsschenkel sogar der gleiche wie beim R33 und R32.
Aren't the rear knuckles of an s-chassis cast iron? Wouldn't that make them dangerous to weld?
Yes, the rear knuckle are made from cast iron but it is a certain alloy, which is quite easy to weld. There are certain cast iron alloys, which are really hard to weld.
Would the z32 ebrake work with this application? And what rotors are u using ?
yes, z32 ebrake would work. you need to use 350z brake disc (322x22mm) Brembo Part number 09.7356.21
Do you happen to sell the whole assembly, I have an S14 which I need to install the rear Z33 Brembos from a 350Z and I can't seem to find a solution apart from machining
please contact me on i.love.depo (at) gmail.com
How do I get a hold of you about get this done for z32 knuckles?
send me a private message. I have 300ZX rear knuckles which I'm modifing.
@@SuperSchnabulator wont let me. Any email or social media page I can get a hold of you through
@@FINWORXS contact me on Facebook my name there is "nairolf erlersch".
Is the skyline33's handbrake suitable for use with the Z33's rear calipers?
Yes, it is.
@@SuperSchnabulator Are the brake discs all from the Z33?
thank you very much for answering me
@@marcoskazuhirofujii2081 yes, those are z33 brake discs
@@SuperSchnabulator give me your email??
What length bolts are you using to bolt caliper to knuckle?
I need to check. I can tell you that in around 1 week.
Still doing this?
How much is the cost associated with this mod?
i you ship them to me (Germany), then i can modify them for 200€.
Where I can buy this I’m in USA
Please contact me via email I.love.depo (at) gmail.com
Ist das auch irgendwie für den r34 möglich
Du meinst R34 GTT ?
Grundsätzlich ja, ich müsste nur mal den hinteren Achsschenkel haben. Eventuell ist der hintere Achsschenkel sogar der gleiche wie beim R33 und R32.
@@SuperSchnabulator also ich hab alles hier Sättel und achsschenkel nur meines Erachtens passen die Verschraubungen nicht überein 🙄
@@saschakummer2656 schreib mir mal eine email an I.love.depo (at) Gmail.com
Where can i buy
send me an email to i.love.depo (at) gmail.com
Where are you located?
Germany. I ship World wide
Hi , I would like to buy a set for Nissan S15
You can buy it from me. Contact me via email I.love.depo (at) gmail.com
@@SuperSchnabulator hi. do you still sell these? i have an S15 and have 350z (Z33) brembo rears which i wish to install
@@mckirdyz yes i do
@@SuperSchnabulator email sent. Let me know if not received
Was ist mit der Handbremse.
Handbremse kann vom 200sx S13, 300zx und allen Skylines übernommen werden.
@@SuperSchnabulator wird die 200sx S14 Feststellbremse auch funktionieren?
@@nickfurter77 nein, wird sie nicht, weil bei der S14 die Handbremsen-Funktion in dem OEM bremssattel steckt, und den tauscht man ja aus.
@@SuperSchnabulator danke für die rasche antwort, dann werde ich wohl einen z32 mechanismus kaufen :)