Great theme ! Everything looks good with everything that's the important part ! People like to do mods but at the end it usually looks like things where added and that's a problem .. in your case everything runs smoothly together ! Good job
Good idea on your speedo relocation, I've never seen it mounted on the headlight before. I might give that a try instead of cutting/lengthening my wires to get it down to the tank. Nice bike 👍
Hi, you can get them on ebay or even Amazon but you will have to build a bracket to mount it. I have replaced them now and went back to the original headlight with LED. Thanks.
I believe i got from Amazon but it's certainly from China. Looks good and fits like a glove but it has changed color over time with sunlight. Its not black anymore, turned more like copper but I kind of like it cause it goes with my bike, but that may be an issue for others.
Miguel Oscar Martinez Lopez Those are the stock handlebars it came with, I just flipped them down. You'll need to disconnect all the controls and put them back, it is not too difficult, just takes some time. Thanks!
The rear LED is a strip flexible tail stop and turn signal. You can get it on Amazon. I just glued it on and fits perfectly. Check the wiring, I traced the wiring of the rear bullet lights that have the break, running and turn signals wiring.
Beautiful bike. Question... are you able to add a pillion passenger seat with the fender chopped or not? And how easy was it to flip the handlebars? Thinking of doing that to my 883 Iron
I believe so, as long as you cut up to the reinforced part of the fender. Flipping the handle bar could take some time as you need to disconnect all the cables and controls, including the throttle which may be the most tedious part. I'd recommend you take pictures or video of how everything is connected so you know exactly how to put it back. Thanks for you comment.
First, to get read of the original tachometer that sticks out, you need to buy a replacement clamp that will hold the handlebars and the gear selector especially made for sporster 883. You also need to buy an after market bracket to hold the tach, this a cheap bracket no made for the sporster but it fits perfectly. I don't have the part numbers but you can goolgle them, I believe I got both through Amazon. If I find the parts number or description, I will reply. Thanks
About $1000, but I did all the work myself. The most expensive parts are the slip-on pipes and the seat, everything esle is fairly inexpensive, just a lot of work and patience. I did in several stages.
Stock and original handlebars, I just flipped them upside down so the right side ended up on the left. I had to disconnect all the controls, which is tedious but not too difficult. You'll need to remember how everything goes back, taking pictures helps.
@@hilmarore9954 awesome, I was just wondering about that. Would ask, but noticed that had a lot of comments already. Congrats for the idea to flip the bars, never seen that before, and thought that's perfect!! Awesome work, man!!
I combined two different types, the rectangular is actually a spot working light that is usually for off-road pick ups or trucks and the 2 pcs are Lemonbest LED. You have to get creative on the mounting and the wiring.
Max , that is the stock original one. I just flipped it down, I had to remove and relocate all the controls, not difficult but a tedious job. Good luck.
If u ride with a video camera ur gonna film ur own death if u crash from being bent over so much and i take it all ur mods are cosmetic nothing done to ur motor air cleaner makes no difference unless u have all the otems to got theu the stage kits
Very unique headlights setup. Give it a very different personal look
Thanks bro!
Yeah who cares
also, i love what you did to your handle bars, i personally have clip ons. but i think imma go with your style in the near future
i think the Custom headlights are dope dope dope . Very very unique
Great theme ! Everything looks good with everything that's the important part ! People like to do mods but at the end it usually looks like things where added and that's a problem .. in your case everything runs smoothly together ! Good job
Thanks for your comment!
This is simply the best iron I've ever seen!
Thanks for you comment!
You can buy the bracket from Amazon or eBay, I don't have the part number but it is a perfect fit for the speedo.
Good idea on your speedo relocation, I've never seen it mounted on the headlight before.
I might give that a try instead of cutting/lengthening my wires to get it down to the tank.
Nice bike 👍
Thanks man!
this is a beautiful build! Bravo! 👏
George Sada Thanks!!!
Wow really awesome bike-build! I personally don#t like the headlight but man, that's just my opinion, overall it's a beauty!
Thanks for your comment and yes, customization is a thing of very personal taste.
are the foot pegs wilie g. i have a 2017 and according to the harley site the dont fit unless u have extended controls
No extended controls, I got the pegs from Amazon.
thanks for replying. great looking bike ride safe
Where did you get the brake lights? Thanks!
I wish i had some knowledge of mechansims or some good freinds who had knowledge of doing these customizations
Awesome work
Hassan, it is not that difficult. It requires imagination, time and will to do it.
Hilmar Ore Many Thanks i should start it from somewhere.
Nice build looks badass 👌
Thanks bro, glad you like it.
Bonita tu moto carnal
what about the brake pedal . how did u manage the willie skull
Had to drill a small hole to attach it with a screw. Works fine.
Love the bike, love the Dire Straits.....
You ever think of maybe adding rear controls? It seems appropriate with the flipped handlebars and it might even be more comfortable and natural
MrArticSwing , you are right! I have thought about it, may be coming soon. Thanks for your comment.
I’m sorry you said you flipped your handlebars? I’m assuming so it’s more of the drag bars look right? Never seen this mod how did that work out?
What’s the story on the headlights?
How's it ride w handlebars flipped/mid controls? Any clearance issues?
It's like having clip ons, no issues for me. You need to play around with the placement to find the sweet spot. Thanks.
how did you get your head lights like that? which led bar did you get?
that's badass Hell yea that bike looks awesome
Thanks bro!!! Glad you like it
Kevin Plaugher tI 5
What did you use for the headlight bracket? Are all 3 lights attached to the same bracket?
I made it up putting different brackets together, all connected. You have to be creative but not difficult to do.
A moto ficou linda, exceto os faróis ... aqui no Brasil falaríamos que é moto de Baiano! rs
Very nice. Those front LEDs tho. You going hunting or something? Loose them.
LOL, thanks. Yeah, it was an experiment, I have put back the original light.
Awesome job tbh , where did you get the headlights ?
Thanks! I got tem from Amazon, 2 separate sets. Put them together with a custom bracket I made.
Hilmar Ore genius!!!
Your style is yours. Only.
Looks cool… but I couldn’t ride long with those handlebars…
whats the naMe and code of color
Per Harley, the color is Sand Camo Denim. Thanks!
@@hilmarore9954 thanks bro, sick machine!
did u buy rear fender or just chopped?
I chopped the original fender.
Great job on that!!! Where can i get those head lamps??
Hi, you can get them on ebay or even Amazon but you will have to build a bracket to mount it. I have replaced them now and went back to the original headlight with LED. Thanks.
@@hilmarore9954 bro, can you show me the mounting brackets that you build. I really love the way it looks ♥
with the tank up so high isnt it uncomfortable?
Nope, it is not that high. it does not make any difference riding. it is just for looks. Thanks for your comment.
Amazing!
Hey lights are sick. What are they can you share where you got them
Anton G , you can get them from Amazon. Those are 2 separate sets I put together with a custom made bracket. Thanks!
how did you make your head lights ? what brand are the round 2 on the bottom Of the light bar ?
1234joshcena, I made my own bracket, not difficult just use your imagination. The round headlights are " Lemonbest". Thanks
where did you buy the headlights and ring lights from? dope modification!
Amazon. Thanks
man now i wanna get rid of my shadow for some iron
great job!
Thanks for your comment testaRosca
Where did ya get your front Dark Custom Brake Reservoir Cover?? I can only find one on EBAY from China.
I believe i got from Amazon but it's certainly from China. Looks good and fits like a glove but it has changed color over time with sunlight. Its not black anymore, turned more like copper but I kind of like it cause it goes with my bike, but that may be an issue for others.
What kind of handle bars did you use? I would like to use same, thanks
Miguel Oscar Martinez Lopez
Those are the stock handlebars it came with, I just flipped them down. You'll need to disconnect all the controls and put them back, it is not too difficult, just takes some time. Thanks!
I really appreciate time you took to answer me, thanks a lot, I will do same thing, nice ride yours
Great project, best regards
definitely need some led info both front and rear
The rear LED is a strip flexible tail stop and turn signal. You can get it on Amazon. I just glued it on and fits perfectly. Check the wiring, I traced the wiring of the rear bullet lights that have the break, running and turn signals wiring.
Pure Badass! Love it!!
Beautiful bike. Question... are you able to add a pillion passenger seat with the fender chopped or not? And how easy was it to flip the handlebars? Thinking of doing that to my 883 Iron
I believe so, as long as you cut up to the reinforced part of the fender. Flipping the handle bar could take some time as you need to disconnect all the cables and controls, including the throttle which may be the most tedious part. I'd recommend you take pictures or video of how everything is connected so you know exactly how to put it back. Thanks for you comment.
@@hilmarore9954 bro thank you
That is a beautiful bike my friend....
Just don’t pick up any fat chicks 👍
did you have to custom make that speedometer bracket or what? Im trying to do something like that for my iron 883.
Beautiful motorcycle
Thanks bro!
I have a 2017 and I want to do what you did with the tachometer! How did you do it?
First, to get read of the original tachometer that sticks out, you need to buy a replacement clamp that will hold the handlebars and the gear selector especially made for sporster 883. You also need to buy an after market bracket to hold the tach, this a cheap bracket no made for the sporster but it fits perfectly. I don't have the part numbers but you can goolgle them, I believe I got both through Amazon. If I find the parts number or description, I will reply. Thanks
Hilmar Ore thank you very much for the information and beautiful motorcycle
เพลงอะไรครับ ?
i dig the light bar
Modification cost 🤔🤔🤔
About $1000, but I did all the work myself. The most expensive parts are the slip-on pipes and the seat, everything esle is fairly inexpensive, just a lot of work and patience. I did in several stages.
beautiful motorcycle.#Brasil
Thank you, glad you like it!!!
NICE
ALL CHINESE PARTS BUT AWESOME
Not all of them. The seat and slip on mufflers are made in USA.
Which colour is this buddy ?
So cool
Handlebars?
danny romans looks like the stock handlebar upside down
Great job! Love your bike! What kind of handlebars and what do you mean by flipped handlebars?
Those are the stock handlebars, i flipped them upside down. I had to remove and relocate all the conrtrols but it's not too difficult.
Thanks for your comment!
Stock and original handlebars, I just flipped them upside down so the right side ended up on the left. I had to disconnect all the controls, which is tedious but not too difficult. You'll need to remember how everything goes back, taking pictures helps.
@@hilmarore9954 awesome, I was just wondering about that. Would ask, but noticed that had a lot of comments already.
Congrats for the idea to flip the bars, never seen that before, and thought that's perfect!!
Awesome work, man!!
How comfortable is it the handle bars looks like it would
But great job on it
unsettledkid Not the most comfortable for long rides. Short rides no problem but certainly looks good and I feel better steering control
Sorry to tell you but that headlight is no good.
where did you get your grips?
On Ebay
From Harley Davidson.
Info on the led headlights??
I combined two different types, the rectangular is actually a spot working light that is usually for off-road pick ups or trucks and the 2 pcs are Lemonbest LED. You have to get creative on the mounting and the wiring.
Kurt Lynch
oop
Lemonbest... so these aren't headlights?
Sweet ride.
Thanks Sitnubs
Where can I pick up that headlight set up?
Sitnubs look for them on Amazon.
ty sir
Thanks everyone for your comments.
What grips are those?
Looks good
Silencers grips, got them from the HD dealership but Im sure you can get similar form Amazon or Ebay. Thanks!
Superb
Beautiful Iron bro!! Is there a benefit to lifting the tank? Or is it just for looks?
Just for looks, gives it a mean and more aggressive look IMO. Thanks bro!
salute bro
Sweet
Show de moto ficou muito bom todas modificações moto de bom gosto
nice bike my friend, where did you get the tank sticker? the skull one?
Monchs MP I got the sticker through Amazon. Thanks for your comment buddy.
Monchs MP, Amazon my friend. To be honest, I got them to cover si me damage/scratch but they turned out to blend in petty nice.
Nice!
Hey buddy
Do you know the name of your Handlebar ? It's the perfect one i need for my Iron ^^
Thanks You
Max , that is the stock original one. I just flipped it down, I had to remove and relocate all the controls, not difficult but a tedious job. Good luck.
Hilmar Ore , thanks You :) you did it alone ??
Max , Yes all by myself. It just takes time and creativity. Thanks
Nut.
WHERE CAN I GET THOSE HEADLIGHTS , THE 3 OF THEM THANKS
Charly Dumeng, you can get them from Amazon. Those are two separate sets I put together with a custom made bracket. Thanks
Hd tem que ser preta
What year is this model?
Abdulrhman Aljuhani : this is 2014 Sporster. Thanks
Ketna ke ha bro
This bike isn’t my style, I like my iron all blacked out but nice mods.
Music?
wow
Dig it !
Bit too cheesy
I feel the same way. My 883 just has a fairing, t bars, straight pipes an intake and a couple other small details and I get a lot of compliments.
เสียระบบเลยไฟน่า
Oof🔥🔥🔥👌😍❤️🤤
جميل جدا 😎⚘⚘
If u ride with a video camera ur gonna film ur own death if u crash from being bent over so much and i take it all ur mods are cosmetic nothing done to ur motor air cleaner makes no difference unless u have all the otems to got theu the stage kits
Stop hating.
Dont be a clown ur basically fronting like uve done hella work wen ur stuffs bolt on cosmetics from ebay!!!!!!!!
U have sticker power
Real Music starts at 03:05... u welcome
เท่สัสๆ กูคนไทย😍😍
Lose the headlight, and this terrible song. Otherwise good on ya
Sorry and respectfully, but you turned it so fucking ugly, man! Daaaaaamn! Such a shame! :(
Horror
👎La iron más fea que eh mirado!!
Disliked
ちょっとダサいかな…。
もう少しスッキリせんと！
Details on the headlights ??
Handlebars?
danny romans , stock handlebars flipped upside down