Arduino Tutorial: How to program the Arduino PRO mini
HTML-код
- Опубликовано: 4 окт 2024
- Programming an Arduino Pro Mini can be difficult at first. But at last, it is very easy if you have the appropriate FTDI usb to serial adapter. In this video, we take a look at the programming procedure. All you need is an Arduino Pro Mini board and an FTDI usb to serial adapter.
Want to learn to code?
👨💻 Check my new RUclips channel: bit.ly/3tku2n0
We will never know how many lives you saved with this simple video. Thank you
This excellent tutorial starts at 3:30
Simple, easy to understand, clear. First Arduino tutorial I watched till the end. Very well done!
Perfect tutorial, clear, simple, no stupid music, high grade video and sound. Thank you
Αχ αυτη η προφορα μας ! Ωραίο video ;)
Kwstas Greco σωστά ειναι στεγνη😂
This works most of the time, but sometimes not. He says at the end 'if your connection is not good'... The reason that it's not good is that there is nothing to ensure each pin is touching the hole. They weren't designed to work like that. You can improve this using a weak elastic band making a triangle trying to pull the non-connected ends of the adaptor and mini together. Now you are using the spring in each pin to make it touch the hole reliably.
it made my day, thank you so much, very clear and exactly what I needed, thanks
Perfect video, thank you for putting it up.
yes
For those who can't upload sketches to pro mini using the cable: You can upload the sketch via UNO. Connect UNO to your PC (using the USB cable), then connect UNO to the Pro Mini using these wires:
UNO Tx - PRO MINI Tx,
UNO Rx - PRO MINI Rx,
UNO Vcc - PRO MINI Vcc,
UNO GND - PRO MINI GND.
On the Arduino IDE sellect PRO MINI as the board. When you click the upload the sketch button, you must hold down the RESET button on the UNO board. Just when the Arduino IDE finishes compiling the sketch and begins the actual upload, you need to reset your PRO MINI by pressing and releasing the reset button on your PRO MINI. Remember the hold down the Reset button on your UNO during the whole process (from compiling until the upload has finished).
i just got a pro mini 5v and i only have one row of pins on the side with the button , the one in this video has 2 rows of pins on the side with the buttons , i thought these were all supposed to be pretty much the same but how come he has a n extra row of pins and i don"t?
also will the FTDI in the link in the description from banggood work well with windows?
it sasy not original chip i have heard that there are problems with ones that are not original chip, not working or bricking from the software i need it to program my pro mini but also want to flash some lixada h801 led strip controllers
THANK YOU!
Arduino asmr. Good tutorial.
Perfect video for knowing bout arduinos .
Great video, thank you, very clear and easy to understand.
what do i select as the programmer in my ide ? usbasp? i have a usbasp, but have ordered a usb to ttl converter... still though, what do i select as the programmer ?
cool video, My first time using Arduino Mini , Thankyou
Information begins at 3:00.
very good video - plz minimize wow effect in sound ? may be using any editor ? but overall quality is good, voice is low and little bit echo type ? or use tissue paper on mic ?
This is cool 👍👍👍😍😍 but do I need to download an ftdi driver
Super video, just what I needed - good info and simple setup ;-)
But sometime my computer (Win7 64bit) halt when I make a upload from the Arduino IDE to the CP2102UART/PRO mini, and I have to reboot the computer. I now down adjust the buffer size and transmission rate for the UART - hope it will fix it.
Exactly the info I needed :-) Thanks !
VERY GOOD TUTORIAL..thumbs up
thank you for the video is for 3.3v arduino pro mini the same process?
Arduino Tools Programmer : Which one to choose ?
That's also my doubt...
Nice!
you just convice me to buy some of those!.
I'm totally new to Arduino and need help programming a pro mini What software do i use where to get it ?
How about all these other ports? Which one is which and whatfor?
You have to make the 'konnaction' right
Thank You 👍
Και λεω η προφορά μου ειναι γνωστη :P μπαινω και τσουπ greece.
Nice video :)
why not use nano, direct usb connection, buy the mini then the costly adapter, have one mini used uno to program it worked only once now it takes forever to load the program , so loaded the bootloader with success, but still no sketch is getting uploaded.
I have a slight program, I bought an Arduino pro mini and a ch340g adaptor, I programmed the built in LED, and it worked great. When I came back to use it the next day though, when I try to upload a new program or update the current one, it just carries on using the blink program, is there any way to reset the Arduino?
Can't we program mini with uno just by connecting RX-RX, TX-TX, RST-RST?
Great work 👍👍👍
Thx for the video but what did you say I need to program it at 3:33.sorry but I did not understand what you said
An FTDI programmer. Check the video desription for a link to the item.
sir some one in hurry looking for input voltage for arduino pro mini but the video 60% to 70% is useless, although the video resolution and other things good :(
Which Usb type Cable have you used?
is the arduino uno code is the same on another arduino board like ardunio pro min?
joenelle ocsalev yes!
Κατατοπιστικότατο!! Ευχαριστούμε πολύ!
can u connect a tft screen to this adruino mini and see?
If you are using a usb cable w/ftdi from spark fun, what programmer do you tell the program you are using? I tried to program a pro mini and nothing works and I tried all programmers and boards. I set rts on close in the ports as mentioned by spark fun. Nothing seems to work with this cable!
Thanks for any help you can supply.
thanks for your video
Good video however the title mislead me. I was looking for instructions "How to program the Arduino PRO mini" without buying an FTDI and didn't expect the comparisons to the boards.
what is this device called tho, he just says tip
Why does my Arduino Mini Pro 5v have different names for those connecting holes? It is a sparkfun one.
Because it's a sparkfun one...
why the pin on my arduino dont match?
I have a problem, when I conect my arduino pro mini to the computer it doesnt reconised the serial port, what can I do? :(
You will need to install the drivers.
Can I disconnect the arduino pro mini and the FTDI once I have uploaded the program?
I want to know if I can just, upload the programm using the FTDI and then use the Arduino pro mini without the FTDI or they need to be always connected even when the program is already uploaded. Thanks
***** Yes of course you can disconnect the FTDI once the pro mini is programmed! You can connect it again if you want to re-program it.
And I think I can use the arduino uno as FTDI, am I right? Thanks for your reply :)
can i program 9DOF-IMU using same FTDI serial programmer...........plz reply i am working on project
Your question shows that your experience is lacking. The 9DOF is a board that interfaces with a microcontroller, and it controlled by the microcontroller. That microcontroller can be an Arduino or a PIC, or a Raspberry PI, it depends of where your experience is. I would say that your experience is nowhere yet, but if you stay with it, you will eventually get where you want to be. Google is your friend, use it to educate yourself. The answers you will get with Google, all depend on your questions. The more you know, the better your questions will be, and the better your Google searches will get. Good luck
VEry useful. :) Thanks
does the screen to program the pro mini come up when you plug everything all together like you show in your video??
no nothing is as it is the video or any other video
don't waste your time with this shit it is all fucking garbage and you have pretty much no chance of getting any of it to work if you use windows
i could have hand blown my own vaccum tubes and made my own
tube transistor computer to do what i want , blink a few LEDS or build a mechanical switch in all the time i have wasted trying to get this garbage arduino shit to work , don't believe the hype, arduino and rpi hucksters just want to sell you useless shit that you will never be able to get working unless you are a CS major
the boards will not load sketches at all in windows the software is buggy AF
and never works EVER been up till 3 am every night of the week trying to just load the damn example blink sketch and it does not work
it sucks
@@andreamitchell4758 lmao mad
If we dump a pretrained classifier in a file trained on a dataset in python and then can we load it in arduino pro mini so that a new data can be tested using pretrained classifier in arduino ?Is it possible ?if yes ,then how...please help
I don't think so. The raspberry pi can do this.
avrdude: stk500_recv(): programmer is not responding
great! So i can program the arduino pro mini with the ftdi, like I can program it with the arduino uno ? (Sorry,i`m not english)
Yes!
thanks!
i think u can use arduino board ISP pins to program arduino pro mini
Yes you can
This a pin Connection FTDI 232 between Arduino Pro mini, DTR DTR, TX0 RX, RX1 TX, VCCVCC and GNDGND, dont plug CTS from FTDI 232 go to GND1 at Arduino Pro mini, this is a make ARDUINO Pro mini heat and not blinking this is make a Hot Component and not good, thanks
Please vidio copy of the data that embedded in arduino pro masterpiece🙏🙏🙏🙏
Thanks
Can I do mini pro programming without this part?
+Prasanga F'do No unfortunately you need a device like this.
+educ8s.tv OK. Thank you for the reply.What is this gadget's name by the way?
+Prasanga F'do usb it's a usb to serial converter
+Tino F Also called with name FTDI or USB-TTL
You can program the pro-mini the way he showed you here, or you can use any other arduino board, and use it to program a standard Atmel chip (Meaning the MCU on the Arduino). MCU means Microcontroller Unit) There is a sketch in the Arduino IDE that sets up the arduino as a programmer. I have used this method to write the boot loader to a bunch of Atmel MCU chips I bought from China that said they had the boot loader, but they did not. This was a very good video. Most things that are done with Arduino can been done in more than one way. None are wrong, some are easier to do than others, so if you are shown an easy way, the other ways may be more complicated. If you are good at searching Google, you can find all the ways that you can program an Arduino, or a stand alone Atmel MCU.
Why would you buy the pro mini and the little thing? Why not just buy the nano!
+william sobral Because you use one USB/serial device for all of your pro minis, and the pro mini is smaller than the nano, as you remove the USB/serial device when you use it. The USB/serial device is only needed for programming. There are other reasons (lower power, etc), and then there are times you'd want the nano. As I'm still at the hobby phase and most of my stuff is on breadboards, I like the Uno or Nano still. But could see wanting an even smaller one when I get to wanting to use it in the real world. ;-)
desiv1
Also, the Mini is quite a bit cheaper than the Nano. So cheap you can use it in things to make the IoT! The Internet of Things!
Was he calling the the USB to serial chip "the secret"? It sure sounds like it.
He is saying "circuit", and "secret". I will assume you were not trying to be funny, because you were not.
In was confused bc in the auto-generated captions it says "secret", but then I realized he meant "circuitry".
they got thenames mixed up they should have called the mini nano and the nano should have benn called the mini
nano implies it is smaller than mini but it is bigger more expensive and have more features and does not need an FTDI they got it mixed up ,
Except, if you want to be technical, it's not the "arduino pro nano", the arduino nano small version of an arduino, while the arduino pro mini is a small version of the arduino pro (www.sparkfun.com/products/10915). So they don't have to make sense relative to each other.
they don't have to but it is still confusing
What's a searqwit?
*circuit He menat - I guess
Skip to 5:38
Your audio is too low, it is very hard to understand!!
Can we make robots with arduino pro mini
simple xplain always worx
Good tutorial. However, I have had the worse experience with banggood.com and would recommend to everyone not to buy from them. I have not received the item that i purchased and no one is responding to my emails.
wraio to videaki sou
Ευχαριστώ
Fucking American commercials beeeeeeeeeeeeeep
Lol, he pronounces LED instead of saying the letters.
Haha, yes, we tend to pronounce LEDs like this in Greece.
+StheManroy same in Portugal
This Arduino is looking fake af xDD gj with the video
It's an original board, Trumpanzee
thanks for this video