Hi, Thanks for the video, very helpful. I know it's been a long time since you uploaded it but I would be very grateful if you could share with me the mixing values for the motors to be controlled with just one stick. I had to replace my transmitter and I am struggling to setup the mixers for one stick to go right or left. Thanks again 👍
Il be following this thread closely thank you for the vlogs mate and the information can’t wait till you upload the second part and fully testing you got a new sub grate work mate tight lines wet nets and cracking picks 👍🏻
Hi Leighton I will be posting some vid of the boat in action very soon just waiting for a chance to get to the lake. Glad your enjoying the thread. I’ve enjoyed making the boat and extras.
carping 24/7 thanks for the reply mate and I can’t wait to see it all in action Im really interested in how it all works and can I just ask in the video I noticed your only using the one battery is this for test only and plan on running the two in the future thanks again bud 👍🏻
Can you help with a wiring question. Do you extend the on/off switch of oe esc to the swich on the boat, and cut off the other one and make sure the wires are seperated?
I bought one off these from Amazon and have nothing but trouble trying to wire it up . I followed the German video as best I could but it does not work right . I can see now that you got a new brain box as you called it in the kit I never got that part. We're did you buy from as I think once I can get that part j can follow your bid and finish the build at last . Cheers for any info.
Hi Jeff I got the boat kit though eBay via mk angel sport. they have a web site. I think if you get the black box you will be able to wire up no problem. try giving them a go.
@@carping247 unfortunately mate the after sell service from the company is a joke and the warranty as I bought it through Amazon and was given broken bits that they would not replace and have asked for help which they have been not helpful and infect are in trouble with Amazon due to the way they treated me after sell. Good luck with yours wish I hadn't bought mine.😖
@@carping247 hi there again mate just wondering if you having problems with the boat not reversing as i think the weed guards are stopping the water passing through under the boat and it will not reverse so im going to cut some of the back of the weed guard off and see if this makes any difference. did you get the weed guards in your kit? i think they supplied them but never tested it?
Jeff Hendy Hi I have left a small gap at back of weed guard to allow water to pass though. I have also put a tube over the prop to protect from running over my lines. Seem to work ok. I will put some more video up soon to show.
@@carping247 like to see a vid of your adjustments and upgrades, all my bits have now arrived for mine ( different boat) but same internals lol. so any help really appreciated
Hello,i'm about to buy this boat,but i would like to know,if possible and i dont ask too much, what glue and and what sealer did you use.Nice video,it will surely help me a lot when i'll buy this product if i have any troubles.Thanks in advance for the answer.
Daniel Madussi Hi Daniel The sealer that I used is called Unibond FT101 has a 10 guarantee and comes in black about £10 a tube. I got from wicks. What boat are you going to order.?
@@carping247 Thank you very much,the boat that i want to buy it's like the one that you bought,from MK Angelsport and it's called Carp Madness XXL.The only problem that i have is that i am from Romania,and i dont think i'll find that sealer here.Oh,well,anywy thank you once again for your response,and if i cant find it here then i'll order it from UK.
@@daveparry100 Thank you very much for the info,although i am a scale model builder,when it comes to bait boats i'm a noob,so all i can do is ask and hope that there are nice people who can reply,i also searched the forums in my country,but the answers were somethink like : ,,i use this'' or ,, i use that''..and in the end they start arguing about which product it's best.. i guess each person has his own prefered product.Thanks again for the info.Best regards.
Aup buddy I’m building one at the moment got a few questions first one is about the hopper release pin how to mount the tube and pin other is about the dimmer connection did you get a connector to fit the one on the brain or did you cut it off and hard wire cheers lee
lee riley Hi the dimmer pin I just removed and soldered the connections. For the hopper release fit the flap first then mount servo in boat make sure that the servo has a fall from the tube down to the hopper flap so the water will not travel up hill. Use some grease or vas. In tube this help stop water ingress as well. Find the angle of the servo arm towards the bait flap and find the height to make a hole don’t go to tight to the flap. Make a hole and fit tube and support bracket inside boat with sealer. Fit inner servo arm adjust and trim to suit. 👍
Hey bud hope your doing well, just bought the same boat but come with no info, most of it is self explanatory but not sure about the cable out the brain that has Dauerstorm written on it, does this connect to the switch for the power or spare cable ? I'm literally ready to finish it off but dont want to power it up and break it many thanks glenn
@@carping247 hi there is a email ok if not I'll send you contact number through email once contacted, I have built it all other than the main switch so a wire diagram would be awesome cheers djnocturnalglendle@hotmail.co.uk
Hi, what was you reason for props over jets? How was quality of the boat and whats your thoughts a year on? I can't decide between one of these and the big lake boat
Hi yeah I’m thinking about purchasing one of these kits and building one myself.. just couple of things id like to ask one where can I purchase one same place as yours preferably and did you manage to find out what them 2 black plastic boxes do or go on the boat? And also you no the servo to release the hopper how is that opting the hopper is it connected to anything to push it open? Thanks Allen 👍
Hi Dave I have up rated to 12volt lit-ion battery and reduced to 60% power to motors via hand set. I found the 6volt speed to be not bad as the boat is very light. but the fish finder that I'm running need 12volt so up rated batteries. With 12volt I think you need to reduce the power to the motors otherwise when on the water you find it hard to not run too much power to the engine.
HELP just tested my xxl KIT boat for the first time, I can go 100m drop my bait and return 50m then handset warning kicks in says flat battery one motor still worked goes in circles, got it back and the battery is 5.8v and the hand set showed full battery in the boat. did a re-run and same thing happened again. So took it home, put it in the BATH with these results at full throttle -- start volts 5.8v after 2 mins 5.4v after 3 mins 4.7v after 3.5 mins 4.3v warning sound at handset followed by one motor shutdown i found i can use either motor but not at the same time. After one min rest 5.8v at boat and hanset shows full battery again. Can anyone please offer some advice.
I dont suppose you are able to check inside your boat brain? I have just connected mine all up, gone to plug in a battery and it fried the battery lead. I have opened the box and one of the out going leads to esc has cross polarity however not sure if this is meant to be here
Daniel Hogg Hi Daniel Sorry I can open the unit as it is sealed in the boat. I think there is only a diode in side for the dimming of the lights. Hope you get it sorted.
Hello again,i just bought this boat and it seems that now i have the same problem as Jeff Hendy.My kit did not come with the ,,brain" box that you have,instead it came with a little something which is called speed controller from novatech,and this little something is supposed to modify the intensity of the lights,but after i wired all together,just like they did in the official german video posted here on youtube,the lights dont work.They are saying to cut the red wire that goes from this speed controller into the the receiver,i did that and neither the lights,nor the digital screen from the back of the boat worked.I reconected the red wire,and now the digital screen from the back of the boat stays lit,but the lights only blinks.Any help is greatly appreciated.Thank you in advance.
Daniel Madussi Hi Daniel I will look into it for you and try and get a solution I also brought another boat with the same thing will try and wire up and let you no I think off hand its a wire from the receiver that you need to cut as in my first vid. I will let you know.
@@carping247 Thank you very much for your reply.In their official video,which can be found here : ruclips.net/video/xo13Py-K7jg/видео.html at minute 26.24 you can see clearly that the red wire has been cut.I tried everything,first time i've conected the wires in paralel (positive to positive and negative to negative),followed everything that guy does in his video,and the lights only blink,but in order to do that the red wire wasnt cut,and the lights only blink if i move the stick of the radio-command a few millimeters forward,if i move it more the lights will go off.The momment i cut the red wire the lights wont work anymore.I also tried to conect the wires in series (pozitive to negative) and it didnt work at all,the light dont even blink anymore.The rest of the electronics (the servos,the engines,the speed controllers and the digital voltmeter) works well.I've sent them an emeail,in which i explained my problem and their answer was that i should try and conect the wires the other way....Dont know what other way i could do that...Anyway,sorry for my long reply,i hope you'll find a solution,and i really hope that the speed controller from novatech isnt broken.Best wishes,Daniel.
Daniel Madussi Hi just been looking at the wiring and seems that you need to wire the red wire to live direct from battery and the black wire direct to earth on battery. Then the red and black wire that say LED straight to the lights. Make sure you remove the red wire from receiver pin. Then wire one speed controller to on off switch. Wire the live wire from battery meter to the red LED red wire (this is a permanent live. Then wire the earth wire from battery meter to one side of the on off switch and run another earth from battery to on off switch so as to be a switching earth. This will power up battery meter via the on off switch went boat switched on
hello , i'm stuck on how to plug in my battery meter and my on off button! as mine isn't the same switch as yours and in the original movie from CM they don't show how you connect the on off button.
steven peeters To wire up the on off switch you need to use the wire from the speed controller just one side remove micro switch and extend wire to new switch. The battery meter needs to be feed from battery’s wire a permanent live to one side of the battery meter and wire a earth to the other side via the on off switch so when turned on the battery meter will become live. Use a switch which has 2 channel so not on the same terminals as speed controller. Hope this helps.
Hi,
Thanks for the video, very helpful.
I know it's been a long time since you uploaded it but I would be very grateful if you could share with me the mixing values for the motors to be controlled with just one stick. I had to replace my transmitter and I am struggling to setup the mixers for one stick to go right or left.
Thanks again 👍
Another great video, u've got ur port and starboard led's the wrong way, left is port 😘
Il be following this thread closely thank you for the vlogs mate and the information can’t wait till you upload the second part and fully testing you got a new sub grate work mate tight lines wet nets and cracking picks 👍🏻
Hi Leighton I will be posting some vid of the boat in action very soon just waiting for a chance to get to the lake.
Glad your enjoying the thread. I’ve enjoyed making the boat and extras.
carping 24/7 thanks for the reply mate and I can’t wait to see it all in action Im really interested in how it all works and can I just ask in the video I noticed your only using the one battery is this for test only and plan on running the two in the future thanks again bud 👍🏻
Hola buenas el DVD que incluye el kit que es?
Hi! I just got the two motors boat. I added new motors (4250 800kv 4s) , but i have issues with reverse. Any recomandations?
Can you help with a wiring question. Do you extend the on/off switch of oe esc to the swich on the boat, and cut off the other one and make sure the wires are seperated?
Daniel Hogg
Hi yes that’s what I did should work fine.
Hope your build goes well👍👍
Cool thought thats what it looked like. Dint get any instructions so having to make it up as I go along. Good fun though
👍🇬🇧 think I’m going have a go lol 👍
I bought one off these from Amazon and have nothing but trouble trying to wire it up . I followed the German video as best I could but it does not work right . I can see now that you got a new brain box as you called it in the kit I never got that part. We're did you buy from as I think once I can get that part j can follow your bid and finish the build at last . Cheers for any info.
Hi Jeff I got the boat kit though eBay via mk angel sport. they have a web site. I think if you get the black box you will be able to wire up no problem. try giving them a go.
@@carping247 unfortunately mate the after sell service from the company is a joke and the warranty as I bought it through Amazon and was given broken bits that they would not replace and have asked for help which they have been not helpful and infect are in trouble with Amazon due to the way they treated me after sell. Good luck with yours wish I hadn't bought mine.😖
@@carping247
hi there again mate just wondering if you having problems with the boat not reversing as i think the weed guards are stopping the water passing through under the boat and it will not reverse so im going to cut some of the back of the weed guard off and see if this makes any difference. did you get the weed guards in your kit? i think they supplied them but never tested it?
Jeff Hendy
Hi I have left a small gap at back of weed guard to allow water to pass though. I have also put a tube over the prop to protect from running over my lines. Seem to work ok. I will put some more video up soon to show.
@@carping247 like to see a vid of your adjustments and upgrades, all my bits have now arrived for mine ( different boat) but same internals lol. so any help really appreciated
Hello,i'm about to buy this boat,but i would like to know,if possible and i dont ask too much, what glue and and what sealer did you use.Nice video,it will surely help me a lot when i'll buy this product if i have any troubles.Thanks in advance for the answer.
Daniel Madussi
Hi Daniel
The sealer that I used is called Unibond FT101 has a 10 guarantee and comes in black about £10 a tube. I got from wicks.
What boat are you going to order.?
@@carping247 Thank you very much,the boat that i want to buy it's like the one that you bought,from MK Angelsport and it's called Carp Madness XXL.The only problem that i have is that i am from Romania,and i dont think i'll find that sealer here.Oh,well,anywy thank you once again for your response,and if i cant find it here then i'll order it from UK.
Ok,just made a quick search here in my country and i found it,it comes in white colour not black,but it's ok.Many thanks.
@@ndidani SIKAFLEX is what most boats r sealed with
@@daveparry100 Thank you very much for the info,although i am a scale model builder,when it comes to bait boats i'm a noob,so all i can do is ask and hope that there are nice people who can reply,i also searched the forums in my country,but the answers were somethink like : ,,i use this'' or ,, i use that''..and in the end they start arguing about which product it's best.. i guess each person has his own prefered product.Thanks again for the info.Best regards.
Aup buddy I’m building one at the moment got a few questions first one is about the hopper release pin how to mount the tube and pin other is about the dimmer connection did you get a connector to fit the one on the brain or did you cut it off and hard wire cheers lee
lee riley
Hi the dimmer pin I just removed and soldered the connections. For the hopper release fit the flap first then mount servo in boat make sure that the servo has a fall from the tube down to the hopper flap so the water will not travel up hill. Use some grease or vas. In tube this help stop water ingress as well. Find the angle of the servo arm towards the bait flap and find the height to make a hole don’t go to tight to the flap. Make a hole and fit tube and support bracket inside boat with sealer. Fit inner servo arm adjust and trim to suit. 👍
Hi. It would be appreciated if you put the video of the switch assembly thanks
Realy good vid is the b-boat ready for an outdoor wet test yet?
Hi Daz I have some more video to up load of the boat in operation I'll try and post in the next couple of days.
👍
Hey bud hope your doing well, just bought the same boat but come with no info, most of it is self explanatory but not sure about the cable out the brain that has Dauerstorm written on it, does this connect to the switch for the power or spare cable ? I'm literally ready to finish it off but dont want to power it up and break it many thanks glenn
Hi
If you have a number I can send you a basic wiring diagram over.👍
@@carping247 hi there is a email ok if not I'll send you contact number through email once contacted, I have built it all other than the main switch so a wire diagram would be awesome cheers djnocturnalglendle@hotmail.co.uk
djglendle I mate send us you number to pchandler247@outlook.com and I will send it over.👍
@@carping247 Hi is there any chance of a wireing diagram as I've just got my boat and there's no cd with it so I'm a bit stuck
Hi, what was you reason for props over jets? How was quality of the boat and whats your thoughts a year on? I can't decide between one of these and the big lake boat
Daniel Hogg
Hi I just thought it would be less maintenance.
Hello, please show the DVD here and the assembly instructions
What web site did u get the boat from?
Great video 👍
I got from eBay. via MK Angel sport. came in about one week.
Hi yeah I’m thinking about purchasing one of these kits and building one myself.. just couple of things id like to ask one where can I purchase one same place as yours preferably and did you manage to find out what them 2 black plastic boxes do or go on the boat? And also you no the servo to release the hopper how is that opting the hopper is it connected to anything to push it open? Thanks Allen 👍
Opening the hopper sorry
can i ask if your happy with the boats speed on 6v with those motors as im in the process of starting a build and thinking 12v with the dirt devils
Hi Dave I have up rated to 12volt lit-ion battery and reduced to 60% power to motors via hand set. I found the 6volt speed to be not bad as the boat is very light. but the fish finder that I'm running need 12volt so up rated batteries. With 12volt I think you need to reduce the power to the motors otherwise when on the water you find it hard to not run too much power to the engine.
@@carping247 ok thk you
HELP just tested my xxl KIT boat for the first time, I can go 100m drop my bait and return 50m then handset warning kicks in says flat battery one motor still worked goes in circles, got it back and the battery is 5.8v and the hand set showed full battery in the boat. did a re-run and same thing happened again. So took it home, put it in the BATH with these results at full throttle -- start volts 5.8v after 2 mins 5.4v after 3 mins 4.7v after 3.5 mins 4.3v warning sound at handset followed by one motor shutdown i found i can use either motor but not at the same time. After one min rest 5.8v at boat and hanset shows full battery again. Can anyone please offer some advice.
I dont suppose you are able to check inside your boat brain? I have just connected mine all up, gone to plug in a battery and it fried the battery lead. I have opened the box and one of the out going leads to esc has cross polarity however not sure if this is meant to be here
Daniel Hogg
Hi Daniel
Sorry I can open the unit as it is sealed in the boat. I think there is only a diode in side for the dimming of the lights.
Hope you get it sorted.
what silicone/adhesive did you use as im having some issues with mine ?
dave parry
Hi Dave
FT unibond 101 got from wickes.
Comes in black.
I used sikaflex 221 goes off solid 👍they recommend that .
Hello again,i just bought this boat and it seems that now i have the same problem as Jeff Hendy.My kit did not come with the ,,brain" box that you have,instead it came with a little something which is called speed controller from novatech,and this little something is supposed to modify the intensity of the lights,but after i wired all together,just like they did in the official german video posted here on youtube,the lights dont work.They are saying to cut the red wire that goes from this speed controller into the the receiver,i did that and neither the lights,nor the digital screen from the back of the boat worked.I reconected the red wire,and now the digital screen from the back of the boat stays lit,but the lights only blinks.Any help is greatly appreciated.Thank you in advance.
Daniel Madussi
Hi Daniel
I will look into it for you and try and get a solution I also brought another boat with the same thing will try and wire up and let you no I think off hand its a wire from the receiver that you need to cut as in my first vid. I will let you know.
@@carping247 Thank you very much for your reply.In their official video,which can be found here : ruclips.net/video/xo13Py-K7jg/видео.html at minute 26.24 you can see clearly that the red wire has been cut.I tried everything,first time i've conected the wires in paralel (positive to positive and negative to negative),followed everything that guy does in his video,and the lights only blink,but in order to do that the red wire wasnt cut,and the lights only blink if i move the stick of the radio-command a few millimeters forward,if i move it more the lights will go off.The momment i cut the red wire the lights wont work anymore.I also tried to conect the wires in series (pozitive to negative) and it didnt work at all,the light dont even blink anymore.The rest of the electronics (the servos,the engines,the speed controllers and the digital voltmeter) works well.I've sent them an emeail,in which i explained my problem and their answer was that i should try and conect the wires the other way....Dont know what other way i could do that...Anyway,sorry for my long reply,i hope you'll find a solution,and i really hope that the speed controller from novatech isnt broken.Best wishes,Daniel.
@@carping247 Hello,any updates regarding the wiring ?
Daniel Madussi
Hi just been looking at the wiring and seems that you need to wire the red wire to live direct from battery and the black wire direct to earth on battery.
Then the red and black wire that say LED straight to the lights.
Make sure you remove the red wire from receiver pin.
Then wire one speed controller to on off switch.
Wire the live wire from battery meter to the red LED red wire (this is a permanent live.
Then wire the earth wire from battery meter to one side of the on off switch and run another earth from battery to on off switch so as to be a switching earth.
This will power up battery meter via the on off switch went boat switched on
@@carping247 thanks,i did that and it worked,thank you very much for your help.best regards.
hello , i'm stuck on how to plug in my battery meter and my on off button! as mine isn't the same switch as yours and in the original movie from CM they don't show how you connect the on off button.
steven peeters
To wire up the on off switch you need to use the wire from the speed controller just one side remove micro switch and extend wire to new switch.
The battery meter needs to be feed from battery’s wire a permanent live to one side of the battery meter and wire a earth to the other side via the on off switch so when turned on the battery meter will become live. Use a switch which has 2 channel so not on the same terminals as speed controller.
Hope this helps.
I need help
nive vid
What does the brain actually do?
Hi Basically it just a simple connection to the motors and contains a diode for the dimming of the boat lights.
Some kits come without it.