@@HeadwayDrive I'm a little sad becuae you use lift blocks for a "body lift" so really not liftinf the actual clearance much at all aside from the larger tires.
@@oki_m135i Since it has been changed to a lift-up coil, both front and rear are raised by 40mm even without a block. Check out how high my vehicle is lifted in the video below ruclips.net/video/7zd4BVKNpaE/видео.html&ab_channel=HeadwayDrive
@@HeadwayDrive my apologies may be I didn't really explain it very well so if you lift it up four or five or even 6 in you're not doing a suspension lift you're doing a body lift which does not raise your clearance off the ground. Now that being said if you do a 4 inch body lift which raising the body only put larger tires then yes having the actual larger tire diameter will lift the truck a little bit I agree. At the end of the day if you're wanting a vehicle that you can raise this much without having to drop all the suspension parts like you did and I talked to the company that fabbed a lot of your parts for your vehicle then really it's best to get a different vehicle. Now for me personally I don't need a super huge vehicle that tall because here in Okinawa we don't have a lot of the trails like you do up in mainland even with that being said you can go on my RUclips channel and my vehicle with just one in Springs made it pretty much everywhere that all the other bigger trucks that I went with want a few trips. The only issue and I mean the only issue I really had was actual ground clearance and that was only in some really deep mud pits so what I had to do is just floor and go really fast. Which I wouldn't recommend doing this unless you want to tear apart your vehicle, so I ordered the 2 inch strut spacer leveling kit that way it'll give me just a little bit of lift body wise because the tires that I have on now are rubbing slightly and it doesn't matter if you take out the inner plastic fender there's that metal piece that sharpiece that's right behind the plastic so really you're just eating into your tires with metal and I don't want to bash parts of the truck in or I'd rather not I should say so I'm going to do the lift to alleviate any rubbing. I appreciate the reply though I've watched most of your videos and fully I watched them all mostly and I actually put my catch can and about the same area you did but I took out my factory intake though.
Steven Winfield Do you know if a 40mm lift block on top of rear spring and on top of front strut mount will effect driveshafts. Thanks. Love the xtrail.
Buenos días saludos desde Panamá lastimosamente no entiendo los idiomas Pero veo q levantaste la carrocería 4 inch aumentas te 4 inch al amortigüadores y colocaste resortes más fuertes también colocaste exenciones a las bases d motor y cardan o eje de mando Muy Elegante trabajo. Veo q documentas todo ese Kit que usastes lo Hicistes o lo venden en Japón. Sería excelente comprarlo y solo instalarlo a la Nissan X-Trail
Awesome ! I own a T31 for 5 years and I love it, I'm thinking of getting a T30 for a project like this, and I'll be using your video for reference . I couldn't find any lift kit here in my country tho, only spacers.
It is effective to replace the spring to increase the height of the vehicle. I have added a block, but it is sold only in Japan. The T30 should be able to efficiently raise the vehicle height just by replacing the spring.
@@HeadwayDrive Oh, Thank you for the advice ! is it doable to do a 4 inch lift just by replacing the spring for the T30 or do I need something else? I'd replace the tire as well, do you have any recommendation for A/T wheels beside BFG and the size of it?
1.5 inches will be the limit if you only change the spring. Anything beyond that requires blocks. Adding blocks may require changing the position of the engine. 235 / 70r16y or 235 / 75r15 can be installed if it rises 1.5 inches
Because that type of lift is illegal in Europe Union countries as it put stress on all the components by adding spacers. Not the best design. Any lifting body lift is bad idea. But if it work for you that’s good
@@HeadwayDrive Do you already have LED bulbs installed in the OEM housing? If so, what's your opinion of them? Everyone says not to install LED bulbs on reflector lights.
Ta sprężyna amortyzująca jest produktem komercyjnym. Ponadto wysokość wynosi 5,5 cala ze względu na dodanie 4-calowego bloku. Wymiana sprężyny zawieszenia i podniesienie wysokości pojazdu zmieni kąt wału napędowego i zwiększy obciążenie. Musisz obniżyć silnik, aby zmniejszyć obciążenie.
![[4x4 Тест] Ниссан X-Trail T31. Особенности ESP на бездорожье.](http://i.ytimg.com/vi/G6uXLc-JvDE/mqdefault.jpg)
You did a very good job on all of your videos like always!, thanks for all the detail about the lift kit
Thank you for watching, I am glad if it is helpful.
Great job on lifting the x-trail! And thank you for the video
Thanks for watching, thanks to all who love x-trail
Thanks for watching, thanks to all who love x-trail
You the best in explaining all youve done to your vehicle..it really help a lot..thank you
Block kits are expensive but work better
@@HeadwayDrive I'm a little sad becuae you use lift blocks for a "body lift" so really not liftinf the actual clearance much at all aside from the larger tires.
@@oki_m135i Since it has been changed to a lift-up coil, both front and rear are raised by 40mm even without a block.
Check out how high my vehicle is lifted in the video below
ruclips.net/video/7zd4BVKNpaE/видео.html&ab_channel=HeadwayDrive
@@HeadwayDrive my apologies may be I didn't really explain it very well so if you lift it up four or five or even 6 in you're not doing a suspension lift you're doing a body lift which does not raise your clearance off the ground.
Now that being said if you do a 4 inch body lift which raising the body only put larger tires then yes having the actual larger tire diameter will lift the truck a little bit I agree.
At the end of the day if you're wanting a vehicle that you can raise this much without having to drop all the suspension parts like you did and I talked to the company that fabbed a lot of your parts for your vehicle then really it's best to get a different vehicle.
Now for me personally I don't need a super huge vehicle that tall because here in Okinawa we don't have a lot of the trails like you do up in mainland even with that being said you can go on my RUclips channel and my vehicle with just one in Springs made it pretty much everywhere that all the other bigger trucks that I went with want a few trips.
The only issue and I mean the only issue I really had was actual ground clearance and that was only in some really deep mud pits so what I had to do is just floor and go really fast. Which I wouldn't recommend doing this unless you want to tear apart your vehicle, so I ordered the 2 inch strut spacer leveling kit that way it'll give me just a little bit of lift body wise because the tires that I have on now are rubbing slightly and it doesn't matter if you take out the inner plastic fender there's that metal piece that sharpiece that's right behind the plastic so really you're just eating into your tires with metal and I don't want to bash parts of the truck in or I'd rather not I should say so I'm going to do the lift to alleviate any rubbing.
I appreciate the reply though I've watched most of your videos and fully I watched them all mostly and I actually put my catch can and about the same area you did but I took out my factory intake though.
Nice explanation, even the fuel leak. Thanks
I was surprised at the fuel leak
Do you know if a 40mm lift block on top of rear spring and on top of front strut mount will effect driveshafts. Thanks. Love the xtrail.
Steven Winfield
Do you know if a 40mm lift block on top of rear spring and on top of front strut mount will effect driveshafts. Thanks. Love the xtrail.
Buenos días saludos desde Panamá lastimosamente no entiendo los idiomas Pero veo q levantaste la carrocería 4 inch aumentas te 4 inch al amortigüadores y colocaste resortes más fuertes también colocaste exenciones a las bases d motor y cardan o eje de mando Muy Elegante trabajo. Veo q documentas todo ese Kit que usastes lo Hicistes o lo venden en Japón. Sería excelente comprarlo y solo instalarlo a la Nissan X-Trail
nice one! thanks for the video
Awesome ! I own a T31 for 5 years and I love it, I'm thinking of getting a T30 for a project like this, and I'll be using your video for reference . I couldn't find any lift kit here in my country tho, only spacers.
It is effective to replace the spring to increase the height of the vehicle. I have added a block, but it is sold only in Japan. The T30 should be able to efficiently raise the vehicle height just by replacing the spring.
@@HeadwayDrive Oh, Thank you for the advice !
is it doable to do a 4 inch lift just by replacing the spring for the T30 or do I need something else? I'd replace the tire as well, do you have any recommendation for A/T wheels beside BFG and the size of it?
1.5 inches will be the limit if you only change the spring.
Anything beyond that requires blocks. Adding blocks may require changing the position of the engine.
235 / 70r16y or 235 / 75r15 can be installed if it rises 1.5 inches
@@HeadwayDrive where did you buy your blocks kit? Do you have a site where I can buy them?
And what kind of springs you installed? Any brand or measures?
この車高で腹するんですね！
すごい道走ってるんですね
DPFは素材がステンとかですかね？しかもジャバラがあるから加工は厳しいかもしれませんね。
応援してます！
引き返さなければいけないような登山道もあります。
できればパイプはステンレスにしたいです、まずプロペラシャフトの上に入るかどうかです。
Why that 4 inch kit is not sold anywhere except in Japan? And it is only for Japanese?
This is because it cannot be installed securely at a shop other than the one at which it is sold. In some cases, it may lead to personal injury.
Because that type of lift is illegal in Europe Union countries as it put stress on all the components by adding spacers. Not the best design. Any lifting body lift is bad idea. But if it work for you that’s good
Подскажите, где купили такой комплект проставок?
Этот комплект производится в Японии, но не экспортируется за границу.
Video on LED light conversion on all lights please.
Do you want to know more about my led lights?
@@HeadwayDrive Do you already have LED bulbs installed in the OEM housing?
If so, what's your opinion of them? Everyone says not to install LED bulbs on reflector lights.
Where can I buy this?
Not available outside Japan
Witam,mam pytanie ...czy zawieszenie robiłeś sam czy jakaś firma się tym zajęła? Też mam w planie podnieść mojego X-a
Ta sprężyna amortyzująca jest produktem komercyjnym. Ponadto wysokość wynosi 5,5 cala ze względu na dodanie 4-calowego bloku.
Wymiana sprężyny zawieszenia i podniesienie wysokości pojazdu zmieni kąt wału napędowego i zwiększy obciążenie. Musisz obniżyć silnik, aby zmniejszyć obciążenie.
@@HeadwayDrive ...dzięki za podpowiedz
Proszę odnieść się
古い動画にコメント申し訳ありません。
冒頭でジャッキアップして馬をかける前にタイヤを外していますが､どうしてでしょうか？
通常は馬をかけてからタイヤを外す。という事でしょうか。
順番は違いますが、特に意味はありません。動画の演出とお考えください。
はじめまして、DNT31に乗ってます。30mmリフトアップしたらドライブシャフトブーツが破れてしまいました。何か対応策は無いでしょうか？対応品は無いようで困っています。
数年走行していた車両は、ドライブシャフト自体の柔軟性がなくなり硬化しているので、リフトアップするとブーツが破れる事があります。
破れたのは左の内側でしょうか？
破れたシャフトブーツは新品に交換するしかありません、形状が特殊なため純正品のみです。
私は登山道を走行中に破れてしまったので自分で交換した事があります、しかし工具等の面もあるので整備工場での交換を推奨します。
新品が手に入るまではブーツにビビニールテープ等を巻きつけていました。
現在は負担を減らすためエンジンとマウントの間にプレートを挟みエンジンを少し下げてたいさくしています。
@@HeadwayDrive 早速有り難うございます。そうです、左の内側です。そうですか、やはり純正部品しか無いのですね❗交換してどれだけもつのか心配ですが…取り敢えず交換して見ます。ありがとうございました。此れからも動画楽しみにしてます。
こんにちは！
リフトキットのリンクを教えていただけますか？
ありがとう！！
日本限定販売です
どうか音声付けて頂けませんでしょうか？
使用したBGMが著作権に関わってしまったので音声は消してあります。
再投稿は可能ですので、しばらくお待ち下さい。
@@HeadwayDrive 大変御忙しい中御返事頂きありがとうございます。
またいつでも結構ですので動画楽しみにしております。