Most Satisfying Industrial Manufacturing Processes with Modern Machinery.

Поделиться
HTML-код
  • Опубликовано: 14 май 2024

  • 00:00 Mass Production Process of Brass Oil-Free Bearings. Bearing Factory in Korea.
    15:11 Process of Making Bridge Girders using Rebars. Precast Concrete Factory in Korea.
    28:49 Process of Making an Electric Fork Pallet Truck. Logistics Equipment Factory in Korea.
    46:47 Mass Production Process of Various Types of Ducts. Duct Factory in Korea.
    58:19 Process of Making a Giant Chemical Tank for Purification Using Glass Fibers in Korea Factory.
    😀 Thank you for watching our video!
    ❌ This video does not contain paid advertisements-
    🎬 Contact : mrprocess44@gmail.com
    - We are conducting free filming for small business owners and SME representatives who are confident in their products.
    🎥 Copyright(C) 2023. Mr.Process. all rights reserved.
  • ХоббиХобби

Комментарии • 351

  • @mr.process
    @mr.process  11 месяцев назад +63


    00:00 Mass Production Process of Brass Oil-Free Bearings. Bearing Factory in Korea.
    15:11 Process of Making Bridge Girders using Rebars. Precast Concrete Factory in Korea.
    28:49 Process of Making an Electric Fork Pallet Truck. Logistics Equipment Factory in Korea.
    46:47 Mass Production Process of Various Types of Ducts. Duct Factory in Korea.
    58:19 Process of Making a Giant Chemical Tank for Purification Using Glass Fibers in Korea Factory.

    • @antonmursid2714
      @antonmursid2714 11 месяцев назад +3

      Hai👍👌antonmursid🙏✌👌

    • @laivannavong4960
      @laivannavong4960 11 месяцев назад +3

    • @xijinpig7978
      @xijinpig7978 10 месяцев назад +2

      in china our certificates are all the same.
      even if performance test fails

    • @user-rz6bi6fj9o
      @user-rz6bi6fj9o 10 месяцев назад +1

      จพี่ก็ว่าทำไมต้องต้องไปหน่อยหน่อยได้ชชชชชชช

    • @martinsandel546
      @martinsandel546 9 месяцев назад +1

  • @wwebtime
    @wwebtime 10 месяцев назад +31

    Nice video... No noisy music, no words to watch through, no annoying narrator! Thanx!

    • @TedBackus
      @TedBackus Месяц назад

      i dont know why the people who upload factory videos feel compelled to add that stupid music they always add. i dislike them, so when the video starts, i know its a bad video. if im watching a video about factories, the last thing i want to hear is elevator music

  • @colincunningham1902
    @colincunningham1902 10 месяцев назад +13

    What a contrast to a Pakistani workshop! All are safety conscious, masks, boots eye ware, clean underfoot, quality metals and the overhead cranes are operated by small handheld controllers, no dangling cables to get in the way of workers!

    • @dragibus66
      @dragibus66 2 месяца назад +2

      but china also don't care about heath and planet as you see in the last one !

    • @colincunningham1902
      @colincunningham1902 2 месяца назад

      China doesn't care about anything, but this is Korea. @@dragibus66

    • @nari8870
      @nari8870 2 месяца назад

      중국아님.한국임 멍청아​@@dragibus66

    • @alfredomosquera5832
      @alfredomosquera5832 Месяц назад +3

      But I prefer to see a pakistani wizard, with hammer, chisel and rivets, create magic. That is creativity and skill, not seeing an army of robots make same things all over and over. That is boresome. Greets from Venezuela

    • @Infinti999
      @Infinti999 Месяц назад

      😂😂😂😂👍​@@alfredomosquera5832

  • @katyusseneves1590
    @katyusseneves1590 11 месяцев назад +21

    Eu ficaria por hs aqui vendo a perfeição desses maquinários👏👏

  • @user-jm5uy7dz1x
    @user-jm5uy7dz1x 3 месяца назад +3

    Got to love the massive scale.. Great to see a modern nation still actually making things.

  • @cuba3433
    @cuba3433 11 месяцев назад +14

    I love yuo Sur Corea !.
    Muchas gracias por todas las buenas manufacturas que ustedes producen .

  • @Pow3llMorgan
    @Pow3llMorgan 8 месяцев назад +11

    imagine going home after a 12 hour shift and all you can hear in your head when you lay down to sleep is the faint but clear monophonic für elise.

  • @mayakovski
    @mayakovski 10 месяцев назад +27

    I love how the small cylinders go into a crate whole, and then come out twice as long and with holes in them. Magic crate.

    • @77gravity
      @77gravity 9 месяцев назад +5

      They have also been machined internally and externally, and had the edges chamfered.
      I WANT THAT CRATE!

    • @shrodingerschat2258
      @shrodingerschat2258 8 месяцев назад +5

      I also love how they take brass tubes, melt them down to make one big brass rod which then gets cut and extruded back into brass tubes again.

    • @far_outlook
      @far_outlook 3 месяца назад

      Do you know anything about machines?

  • @AppliedCryogenics
    @AppliedCryogenics 11 месяцев назад +18

    I think it's really cool that Korean forklifts play "Für Elise" while backing up. U.S. forklifts just make an irritating beep that sounds like a 1980's alarm clock.

    • @hiker123
      @hiker123 10 месяцев назад +2

      I think it would drive me crazy if i had to hear that all day.

    • @jayson8372
      @jayson8372 10 месяцев назад +5

      I was going to ask why they kept playing that (Für Elise). Thank you!

    • @PexiTheBuilder
      @PexiTheBuilder 10 месяцев назад +1

      Came to look answer what plays it, found it!

  • @thedevilinthecircuit1414
    @thedevilinthecircuit1414 7 месяцев назад +5

    Graphite plugged bronze bearings. VERY cool!

  • @galaxiedance3135
    @galaxiedance3135 8 месяцев назад +17

    As a Tool & Die Maker, I"ve seen these Brass oil free bearings and bushings but never seen how they're made. One thing most people don't know... brass slivers hurt much more than normal! they really stick in because the edges aren't smooth, they are jagged. Also, drilling brass... it's best to knock off the sharp tip of the drill, actually have a negative angle...cuts much better, a sharp tip will want to grab. Strange but actually works extremely well like that!

    • @jacksonlefteye
      @jacksonlefteye 7 месяцев назад +1

      one of the craziest sensations i've ever experienced is getting stabbed in the hands/fingers with the icicle-shaped dross along the edges of thick laser-cut stainless steel, i can only describe it as a "sour" pain that seems to make every living cell nearby wince in pain, it's really really strange

    • @galaxiedance3135
      @galaxiedance3135 7 месяцев назад +1

      @@jacksonlefteye I know that feeling. Your heart rate really changes too! I finished cutting down some stock guide for a die with the fly cutter. You know, it sort of peels away the metal on the far side and never quite breaks off. I went to file it off with a bastard file, my file slipped and I cut my thumb open with this 1/8" burr... It was very deep! In high school machine shop, I seen this long bar 1"x 3", maybe 12ft long, start to tip out of the steel rack when someone was getting something out. It was going to hit someone who didn't know it was falling. This bar was coated with oil. I reached out to grab it with my hand and stop it. I had all of my fingers cut pretty bad in 2 spots from the sharp corner of the rectangle stock steel. I had blood dripping all over the floor. I probably saved that student though. If that hits them in the head, could be dead. There was so much blood, i remember the kid asking if I have aids (cuz aids was big in the 90's) before he cleaned it up. haha. Thank god, i don't have any scars. ALSO, flying chips that melt onto your skin suck too! I have scars from a long curly one from a fly cutter. it was like Velcro coming off the back of my hand.

    • @jestershyper
      @jestershyper 5 месяцев назад +1

      I worked at rivian where I was a tool and die tech and always wondered how they were made in a factory

    • @far_outlook
      @far_outlook 3 месяца назад

      Doesn't know anything about machines but talks a lot

  • @AakeTraak
    @AakeTraak 6 месяцев назад +1

    To be honest, this was a total snoozefest. No shouting, no open flames, no janky cranes, no squinting welding, no chance for serious personal injury.

  • @buzzbee1251
    @buzzbee1251 11 месяцев назад +11

    I love brass, two soft metals to make a mildly hard metal. It is wonderful in the lathe or on the table of a milling machine. It's Lustrius, forgiving, and a pleasure to work with - I think I like brass.

    • @codprawn
      @codprawn 10 месяцев назад +1

      I doubt it is brass. More likely phosphor bronze oilite bearings.

  • @lupusdeum3894
    @lupusdeum3894 11 месяцев назад +8

    I am very very satisfied! Thanks again, Mr P !

  • @masterQ20
    @masterQ20 8 месяцев назад +5

    *WOW!! Great idea with Metal my friend* 👏👏👏

  • @jinksonyou
    @jinksonyou 7 месяцев назад +3

    This is the MOST satisfying video I've seen on RUclips! The attention to detail is OUT OF THIS WORLD, I can't even pick a favorite product! Everyone poured their heart n soul to EVERY STEP, there's not many places in the world you can say about! WELL DONE, ALL OF YOU!

  • @marcosferro9898
    @marcosferro9898 11 месяцев назад +20

    A Coreia é um país de primeiro mundo, tudo que é fabricado na Coreia tem uma excelente qualidade. Parabéns para vocês que fazem a Coreia ser a primeira do mundo em tecnologia.

    • @alfredgravy6375
      @alfredgravy6375 11 месяцев назад

      Tank manufacturing, no tanks!

    • @zadkmb
      @zadkmb 11 месяцев назад

      全部粗悪品やで。

  • @clgusa23689
    @clgusa23689 5 месяцев назад +1

    Watching these machines work in harmony is like witnessing a well-orchestrated ballet. Only it's all gears and no tutus!

  • @bryan2523
    @bryan2523 9 месяцев назад +3

    The massive scale is incredible.

  • @KaranveerSingh97
    @KaranveerSingh97 9 месяцев назад +4

    The rebar tying tool can easily go for $1000-3000... If you don't have one in today's day and age and are in construction you really need to get one

  • @guzmanmedina1963
    @guzmanmedina1963 10 месяцев назад +5

    este tipo de videos es súper didáctico y súper interesante.

  • @robertwest3093
    @robertwest3093 9 месяцев назад +4

    I was hoping that you would show all those holes being drilled in the bronze bearings.

  • @justinobittencourt2102
    @justinobittencourt2102 10 месяцев назад +3

    Completamente incriveis👍👍👍

  • @dassmith
    @dassmith 9 месяцев назад +5

    Cheers to the person at 11:08 who added the finest packed and labeled box on the shelf.

    • @user-by7ii3mf7k
      @user-by7ii3mf7k 7 месяцев назад +1

      too much space above the packed item. It's gonna shift around. Every space needs to be filled for a proper pack.

  • @tomb4496
    @tomb4496 11 месяцев назад +7

    I was so impressed all the way through the video of the bearings until he packed the box. It look like my Christmas present wrapping.

  • @LorenzinSerranete
    @LorenzinSerranete 11 месяцев назад +8

    Verdaderamente satisfactorio🔝👍🏻

  • @CaldeirariaUsinagemRaiz
    @CaldeirariaUsinagemRaiz 3 месяца назад

    Essential processes for industrial areas, and we are increasingly lacking qualified or experienced labor. Congratulations on the video.👍

  • @macroplexx
    @macroplexx 11 месяцев назад +4

    Satisfactorio !! 😎

  • @user-zu2rw8sb6y
    @user-zu2rw8sb6y 4 дня назад

    С удовольствием посмотрел как производятся погрузчики SOOSUNG в Корее. Приходилось обслуживать на производстве подобный, этой фирмы. Вмпечатления положительные.

  • @Rebar77_real
    @Rebar77_real 10 месяцев назад +4

    Got to love the massive scale.

  • @stevenbyun
    @stevenbyun 9 месяцев назад +3

    Amazing process!

  • @dcdanger6151
    @dcdanger6151 10 месяцев назад +7

    that cordless rebar tying tool for the win 👍🏻

  • @Jabberwok28
    @Jabberwok28 10 месяцев назад +1

    You guys should be using the JetCo cutter for some of the sheet-metal and composite materials. No dust, and nowhere near the issues with slow-cutting of a grinder.

  • @junc1328
    @junc1328 10 месяцев назад +3

    황동 무급유 베어링 자동차 프레스 금형업에서 가이드 부시 라고 해서 금형 상하 결합할때 사용함 검은색 점들은 움직일때 윤활 작용해주는 흑연임

  • @markf350s
    @markf350s 11 месяцев назад +8

    Your workmanship is amazing. Something to be very proud of Americans should learn from it.

    • @KM-vc2yp
      @KM-vc2yp 11 месяцев назад +1

      Speak for yourself

  • @Mona.Lisa1503
    @Mona.Lisa1503 11 месяцев назад +9

    Yes.. very environmentally friendly, with modern machines, well. Pictures say more than words.

    • @ifwemadeit
      @ifwemadeit 8 месяцев назад

      Let the mud people suffer, me running my lawn mower all day everyday.

  • @franciscopatrikcnazario660
    @franciscopatrikcnazario660 11 месяцев назад +3

    A reciclagem é muito importante

  • @w.w77
    @w.w77 4 месяца назад

    The forklift builders did a good job

  • @kerjakeras65
    @kerjakeras65 8 месяцев назад

    Kurasa ini adalah video yang sangat bagus...dan tidak membosankan untuk di tonton 👍🇮🇩..

  • @user-qc8ei9wl7n
    @user-qc8ei9wl7n 10 месяцев назад +6

    Я конечно не знаю требований к безмасляным подшипникам, но моего опыта достаточно чтобы понять что техпроцесс получения заготовки тупой: использовать более дорогой трубный прокат, переплавить его, получить кругляк, нагреть и отпрессовать в трубу большего размера, отрезать фрезой шириной не менее 5 мм дефектные края трубы, и резать такой же фрезой на заготовки. Гигантский расход денег на оборудование и его ремонт, на энергозатраты, на ЗП рабочим, много отходов. Почему, если нужно литье с добавлением присадок не использовать чушку или пруток, если не нужно литьё с добавлением присадок не использовать ближайшую стандартную трубу. Это всяко дешевле будет. Резать трубу на заготовки фрезой это вчерашний день, дешевле и проще по всем параметрам на ленточнопильном. И стружки меньше раз в 5 будет, которая при переплавке даст угар не менее 20% от массы стружки.

    • @HSS536
      @HSS536 6 месяцев назад

      Ну да, там же куча дебилов сидит, сопли на кулак наматывает, два плюс два посчитать не могут)) Сейчас твой комментарий прочитают и дела у них пойдут в гору😂

  • @armaky4962
    @armaky4962 9 месяцев назад

    Congratulations Great Work Show man !

  • @joshuahale8621
    @joshuahale8621 10 месяцев назад

    That rebar wire tool I give a chefs kiss as a fellow iron worker .

  • @ExploreTechniques95
    @ExploreTechniques95 11 дней назад

    nice video

  • @machu7831
    @machu7831 11 месяцев назад +2

    우와! 이 비디오는 훌륭했습니다 🍩🚐😇😇

  • @manoelfilho583
    @manoelfilho583 10 месяцев назад +4

    Olá, Parabéns pelo vídeo é Show! 👍🇧🇷

  • @jotac66
    @jotac66 10 месяцев назад +5

    Muito didático seus videos. Sugiro apenas que coloque o país onde está localizada a indústria . Fica completo.

    • @antonionunes6031
      @antonionunes6031 8 месяцев назад

      É só clicar em visualizações que esta lá, tudo em detalhes.

  • @matthewickman
    @matthewickman 2 месяца назад +1

    Wish I knew what was going on here, I like the particulars.

  • @BrassLock
    @BrassLock 9 месяцев назад +1

    Let me get this right ✅ 😌
    Brass cylinders all shiny and new, with no holes in them get ridiculously hot and melt into a big blob, then are somehow squeezed out into a round lump of rather daggy looking brass.
    The daggy lump of brass is heated (again) and squeezed into cylinders once again, chopoed off into smaller cylinders, drilled full of holes (which are filled up with black stuff), ground to a shiny finish and put into cardboard boxes, because someone likes them more than the shiny cylinders they had in the first place.
    Makes *_Perfect Sense_* to me.

    • @paradiselost9946
      @paradiselost9946 8 месяцев назад +1

      lol. its a special type of bronze so theyre saving every shaving and remelting them down.
      "oil free bearings". the lil slugs are graphite, and despite the oil free... theyre then soaked in oil under pressure.
      they dont require oil when in _service_ is all... for those applications where oiling doesnt work, cant be used, etc. high temperature shafts in ovens, that sorta thing. and ceramic bearinsg are just too expensive and or unsuitable.
      some of us LIKE our spockled brass cylinders, thank you very much!
      lol

    • @BrassLock
      @BrassLock 8 месяцев назад

      @@paradiselost9946 Yes, they're rather cute lol.

  • @Suresh-ns1lt
    @Suresh-ns1lt 7 месяцев назад +1

    Oh fantastic job

  • @slowneutron6163
    @slowneutron6163 8 месяцев назад +1

    The thumbnail for this looked like a bunch of shredded wheat biscuits for hill giants.

  • @adehermansyah8175
    @adehermansyah8175 9 месяцев назад +1

    amazing !!!!

  • @reemvonbraun2684
    @reemvonbraun2684 9 месяцев назад +1

    1:03:00 interesting using an angle grinder outside !! kioos of glassfiber and polyester in the nearby peoples houses gardens lungs ....

  • @ruperterskin2117
    @ruperterskin2117 6 месяцев назад

    Cool. Thanks for sharing.

  • @zeroxception
    @zeroxception 10 месяцев назад +8

    Great to see a modern nation still actually making things

  • @user-ju7cv1in5s
    @user-ju7cv1in5s 8 месяцев назад +1

    Why Is GREEN SLEEVES playing on loop in the background of this bridge girder Manurfacturing company??????

  • @LarryTait1
    @LarryTait1 10 месяцев назад +3

    Odd that none of the micrometers are held in line and oriented to the inside diameters, the first few times we see them used. Always at some arbitrary angle.
    The rest of the process looks very good though. The final QC measurements are done properly.

  • @z_ecMb_
    @z_ecMb_ 10 месяцев назад +5

    Очень много ручного труда,нужно больше роботизации.

    • @HSS536
      @HSS536 6 месяцев назад

      Если есть много дешёвой рабочей силы, то зачем нужна роботизация.

  • @RakeshKumar-ml7sv
    @RakeshKumar-ml7sv Месяц назад

    Good idea

  • @KelvinW344
    @KelvinW344 10 месяцев назад +3

    Looks like a real healthy amount of glass fiber / epoxy dust released into the environment (and inside the workers lungs) in the last video. And why is "Für Elise" played in two different sections?

    • @wombatillo
      @wombatillo 10 месяцев назад

      That's most likely polyester resin, not epoxy, but similar considerations apply. I would also be quite vary of applying styrene, vinyl toluene or some-such diluted resin without full chemical gloves. THose fabric backed worker gloves will eventually leak from cracks and wear and will most definitely absorb spills on the back of the hand and the cuffs.

    • @spawn0683mailru
      @spawn0683mailru 3 месяца назад

      Это полиэфирная смола, там на банках написано. Работал с нею, это просто настоящий ад. Она токсична. И какие после этого очистные сооружения?

  • @Manufacturingsite1
    @Manufacturingsite1 Месяц назад

    Hello everyone have a great day

  • @workingexperts
    @workingexperts 9 месяцев назад +1

    Verry nice

  • @dcolb121
    @dcolb121 9 месяцев назад +1

    If I had to do this day after week after year I'd go nuts.

  • @Kalus_Saxon
    @Kalus_Saxon 9 месяцев назад +2

    33:27 the old switcharoo…. 😉

  • @user-ce4bv3fd6f
    @user-ce4bv3fd6f 11 месяцев назад +2

    감속기 업체에서 23년째 근무중인데 오일레스베어링을 항상 구매해서 사용하는데 전가공 공정은 처음보네요!

  • @joanlittle4235
    @joanlittle4235 10 месяцев назад +1

    This is better than a volcano It is all controlled verygood for me Granny usa

  • @chriswright9819
    @chriswright9819 7 месяцев назад +2

    Not too sure what Beethoven would say about his tune being used all day

  • @scottpittsinger1654
    @scottpittsinger1654 9 месяцев назад

    welders, making company rich, get real time skill gets a boost

  • @koceng22
    @koceng22 10 месяцев назад +1

    amazing

  • @Zapper1279
    @Zapper1279 9 месяцев назад +1

    My mind would go insane after working in a factory where there is only 1 music and it’s “la lettre à Elise” - in France this is mainly used as waiting tones on administration things, therefore hell x100 - pavlov & ptsd triggering 😂😂😂

  • @KM-qx6nh
    @KM-qx6nh 8 месяцев назад +1

    I wonder ......... Were any of the lifts they used to lift their lifts among any of the lifts they have made ? 🤔

  • @Richard-om7vd
    @Richard-om7vd 6 месяцев назад

    Excellent video.

  • @user-ot4ip1wl2j
    @user-ot4ip1wl2j 3 месяца назад

    オオー ノギスが ミツトヨ製ですね🙌

  • @joon3009
    @joon3009 Месяц назад

    사출금형제작에 필요한 부싱이군요

  • @ilsinhoesp1
    @ilsinhoesp1 7 месяцев назад +2

    Em 11:12, o vídeo mostra que cometeu uma falha ao embalar. Deixou 2 peças tendo atrito dentro da caixa de papelão pois não colocou o plástico bolha entre elas para proteger. 😱😱

  • @lalbahaduryadav163
    @lalbahaduryadav163 9 месяцев назад +1

    Good

  • @luizpaulolulu5511
    @luizpaulolulu5511 5 месяцев назад

    Trabalhei anos na montagem e projeto de torres de eletricidade em subestações e linhas

  • @TobyA777
    @TobyA777 10 месяцев назад

    In the last segment, I see where Stockton Rush got his inspiration for his doomed sub from!

  • @ghorpestad
    @ghorpestad 3 месяца назад +2

    Lots of PPE missing

  • @matthewcornelius5862
    @matthewcornelius5862 3 месяца назад

    Dude those CNC machines are beat

  • @TheTattoomaschine
    @TheTattoomaschine 12 дней назад

    sehr preziese messung des innen durchmessers! würde aich ein zollstock reichen

  • @user-ck2bn4ey8c
    @user-ck2bn4ey8c 3 месяца назад

    21:41 corrosion is one of the most faced problems in industrial manufactoring

  • @ChandysK
    @ChandysK 11 месяцев назад +2

    The mother usual do any dough at home, how about do it one by one by just like healing process

  • @blex5579
    @blex5579 8 месяцев назад

    those koreans got it down man...nice and tidy, even play "für Elise" lol
    from germany

  • @kenc3288
    @kenc3288 8 месяцев назад +1

    Those pallet truck guys. No mask when removing the frame from sand blasting, the painter’s face not fully shielded, the welder’s assistant no eye protection. Pretty lax safety standards for an advanced economy.

  • @RobertWilliams-mk8pl
    @RobertWilliams-mk8pl 4 месяца назад

    I understand the cable tensioning in the concrete members. But what would stop creep of the smooth cable within the concrete over time.

  • @TedBackus
    @TedBackus Месяц назад

    begin forced to listen to a 1988 casio keyboard version of Fur Elise every 30 seconds, all day long would be like purgatory

  • @iwanberkelanaofficial5460
    @iwanberkelanaofficial5460 8 месяцев назад

    Amazing🤔🤔🤔🤔👍👍👍👍

  • @artszabo1015
    @artszabo1015 10 месяцев назад

    In your first chapter what is the name of this company in Korea? Back in 1990 I went to Toronto Canada and disassembled a brass mill called Arrowhead Metals. The machinery went to Poonsan Ind. in Korea. Could this be the same extruder???
    Art from Ohio

  • @anthonym612
    @anthonym612 10 месяцев назад

    The only possible thing that could make this video better is Mister Rogers could be here to do voiceover.

  • @MyTubeSVp
    @MyTubeSVp 11 месяцев назад +3

    Concrete factory : Who else would go utterly mental with Für Elise playing all the time? That’s actually torture …

    • @raycarnis9540
      @raycarnis9540 11 месяцев назад

      That's the ice cream van outside.

  • @anonamouse5917
    @anonamouse5917 10 месяцев назад

    The 15:11 segment: I wonder how many of those workers go home and blast 'Fur Elise' at full volume.

  • @g.r.4853
    @g.r.4853 8 месяцев назад

    Hello FedEx, I got an overnight for Philly PA.

  • @vincentjoseph5726
    @vincentjoseph5726 11 месяцев назад +1

    My God bless you for seeing this work worthy i could use some elaborate of these dust Powder and tubes and solid flats and future customer service when i have my own favourite modeling technology technologiesi sharpened Diy projects craftsman style work Shop is ready to be All good morning and good luck and good wishes and good blessings and good health and good care and good career Lived with

    • @handdancin
      @handdancin 11 месяцев назад

      chatGPT version -1,000

  • @74KU
    @74KU 11 месяцев назад +1

    30:00 those guys could put a box trailer together with an arc welder and 1 stick..

  • @mauriciolima9427
    @mauriciolima9427 3 месяца назад

    Que legal 😃

  • @user-ul2ix7ry8k
    @user-ul2ix7ry8k 5 месяцев назад

    덕트공장 안전모 안쓰나요?

  • @selfbong
    @selfbong 4 месяца назад

    SGO 보세요
    함침시 제품을 넣고 진공상태에서 함침유를 주입해야 함침이 됩니다
    BUSH상태에서 약 11%의 함침율을 보이며 Plate상태에서는 함침율이 5%가 안됩니다
    그래서 루보에서 함침을 먼저한 윤활제를 쓴겁니다 약20%이상의 함침율이 나옵니다

  • @brain_health_quiz
    @brain_health_quiz 11 месяцев назад +3

    9:40 역시 어머니의 손맛!

  • @lourias
    @lourias 11 месяцев назад +3

    ... and what is the application for those brass bearings?

    • @BlownF150
      @BlownF150 10 месяцев назад +1

      Bronze graphite plug bearings. Low-speed, high-load applications where lubrication is too difficult like in oil wells and underwater.

  • @heyhoe168
    @heyhoe168 10 месяцев назад +1

    I would not like to be closer then 1 km to this glass fiber dust cite.