How To Hack And Install Tiramisu On Your Nintendo Wii U in 2024 [Wii U Homebrew Series Part 1]

DO THIS AT YOUR OWN RISK, I AM NOT RESPONSIBLE FOR ANY DAMAGE OR BRICKS AS A RESULT OF THIS VIDEO
Wii U Exploit Site Tutorial - cloaking.link/Wii-u-exploit-t...
My Wii U SD Card Files - cloaking.link/Wii-U-SD-Card-F...
instructions:
1. Download Tiramisu and the sigpatches from the link below
Tiramisu - cloaking.link/Wii-u-tiramisu
Sigpatches - cloaking.link/Wii-u-sigpatches
2. Insert your Wii U's SD Card into your PC
3. Extract and copy the contents of the newly downloaded Tiramisu .zip file to the root of your SD Card
4. Copy the 01_sigpatches.rpx file to /wiiu/environments/tiramisu/modules/setup on your SD Card
5. Take the SD Card out of your computer and plug it into your Wii U console.
6. Launch the Internet Browser and navigate to the website wiiuexploit.xyz.
7. Click on Run Exploit! and hold the B button until you see a screen that says Please choose your payload:, this will be necessary for the next steps.
If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, reset the browser's save data and try again.
If you see the EnvironmentLoader, you did not hold down B long enough. Try again.
Backing Up Your Wii U Nand:
1. Navigate to nanddumper using the GamePad and press A to launch it.
2.Use the Wii U GamePad's D-Pad to enter the following configuration:
Dump SLC: yes
Dump SLCCMPT: yes
Dump MLC: optional
Dump OTP: yes
Dump SEEPROM: yes
Press the A button to start the dumping process.
3. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. The files will appear on the root of the SD card.
4. To make sure you don't lose the files, copy the slc.bin, slccmpt.bin, seeprom.bin, otp.bin (and if you chose to go with a full backup, every mlc.bin.part) file to your computer.
Delete the files from your SD Card to free up space.
Installing PayloadLoader:
1. Take the SD Card out of your PC and plug it into your Wii U.
2. Execute the web browser exploit as previously explained but this time, you will need to hold the X button to open the Environment Loader menu.
3. Navigate the list using the D-Pad and navigate to the installer environment, press A to launch it.
4. Press the A button to check if you can install the PayloadLoader.
It should now tell you that the PayloadLoader can be installed onto the Health and Safety Information app.
5. Press the A button to select Install / Update.
You'll be asked if you are sure you want to install the PayloadLoader. Use the D-Pad to select Install and press A.
6. After installing finishes, press A to shut down the console.
Autobooting Tiramisu (Optional)
1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app and hold the X button to open the Environment Loader menu.
2. Navigate the list using the D-Pad and navigate to the installer environment, press A to launch it.
Press A to select Check.
3. Select Boot options.
You will be asked if you want to switch the boot title. Press A to select Switch to PayloadLoader.
When the process finished, press A to shutdown the console.
The PayloadLoader will now be launched automatically on every boot.
Setting up PayloadLoader, Environment Loader and Tiramisu:
1. Turn on your Wii U,
2. The Environment Loader should show up.
Using the D-Pad, navigate to tiramisu and press Y to set this to your default environment, then press A to launch into Tiramisu.
3. You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
4. To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
On the Tiramisu Boot Selector, the Wii U Menu should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
5. To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
Blocking System Updates:
1. Download UFDiine - github.com/GaryOderNichts/UFD...
2. Plug your SD Card into your Computer.
3. Download UFDiine and copy the UFDiine folder to sd:/wiiu/apps on the root of your SD Card.
4. Plug the SD Card into your Wii U console and boot Tiramisu.
5. Navigate the Wii U Menu and run the UFDiine app.
6. Press the A button to delete the update folder.
7. Confirm that it says Update folder is deleted.
8. Exit UFDiine. You are now blocking updates.
Congrations your Nintendo Wii U Console is now hacked and is ready to install and play homebrew.
Check out my next video parts down below
Part 2 - • How To Install Homebre...
Part 3 - • How To Backup Wii U Di...
Part 4 - • Download Wii U Games, ...
Nintendo,Nintendo Wii U,Nintendo Wii U Modding,Nintendo Wii U Hacking,Modding,Hacking,Wii U,Tiramisu,Homebrew

[@tingelo6491]

Cool

[@ramenman2018]

Thanks so much dude

[@karlgreene2177]

Pity there isn't a modding service for those of us that aren't tech savy.