Tesla Sedan Trunk PPF Wrap - ONE PIECE - NO SEAMS
HTML-код
- Опубликовано: 2 окт 2024
- Ever wanted to know how to properly wrap a trunk of a sedan in one piece? Paint Protection Film has its own unique challenges when striving for the perfect installation. Here I demonstrate how to wrap a trunk on a Tesla Model 3 with XPEL Ultimate Plus PPF. Techniques used for this trunk wrap can be used for many other sedan trunks out there.
Make sure you have the trunk properly cleaned, and if needed you can disassemble the lights so you can properly wrap the PPF.
The initial stretch and tack is the MOST IMPORTANT. Make sure when you stretch the film, you do so along the sharp body line of the trunk. It allows the film to hug and wrap along the top and bottom of the trunk. Do not over stretch the film as you will create unwanted tension which can lead to a failed installation.
If you have any question, please comment below and I’ll get back to you.
Make sure to give the channel a follow and hit the like on the video if you enjoyed it.
Instagram:
@apshield
@theppfchannel
Can you demonstrate Tesla Model 3 front bumper please. Thank you 🙏
What tack solution are you using?
Great videos for sure
Amazing work! I would love to see how the front bumper is done in a one piece.
Can we get close up video/pics of this after fully installed? I’ve tried this method previously and always got glue lines. After seeing you stretch and lift multiple times if worries me that there are glue lines post installation that won’t ever come out. I’m not doubting your ability but just really want to know how the end result is.
I’m wondering what temperature his slip solution is.. I find for myself when I do high stretch installs if I get hot water and mix my slip solution, I can lift up multiple times without any adhesive disturbances
@@thefilmguy6497 thanks I’ll have to try that out!
Is the water hot to the touch or just warm?
@@ebraheemdababo it’s hot lol! When I say hot, I mean as hot as my tap will allow
Sheesh! I’m about to do this in stealth soon! Getting myself ready
AWESOME JOB!!! WOULD YOU MIND SHARING HOW TO CUT OUT THE PERFECT CIRCLES FOR THE PARKING SENSORS ON TESLA BUMPER?
What kind of adhesives can we use to stick those film area that is lifted and not sticky anymore?
what order do you recommend in wrapping the panels on the entire car? Can you put ppf on a panel that has already been wrapped when you're wrapping the entire car?
You make it sound SOOOOOOOOOO simple! Great job!
thats exactly how i do it. good work
I didn’t do 8oz to 32oz tack and the film ghosted/hazed. Lol did 50/50, should’ve googled it
Hi. First. Thank you for all the tips and tricks. 2nd- I'm buying Xpel in bulk. Can you tell me how much material I would need to wrap the entire Model 3? How much do you use to do 1 whole Model 3?
Your videos are pretty good with explanations, but I have a question about the use of the word "tension" when mentioning fingers. It seems to me the finger is caused by excess material, which is not tension. Can you please elaborate?
can you show how do you mount the emblem after ppf?
Try turning it off and on again
Pretty much like the same way as vinyl wrap but much easier as it doesn’t stick till you squeegee it.
What was the size of that piece of film? 60 x 50 or so? Thanks.....
This is only drama timepass I can do this only only 20
Please do a video of the front bumper wrap as well
How much do you charge to do a full car wrap on a standard sedan?
Any video for front bumper model 3? One piece
Any similar tips for the side mirror on the Model 3?
Could you make a video to show how to wrap a Tesla Model 3 front and back bumper in one piece. Thank you
No problem. Next TM3 we get in I'll make the video.
Keep up the good work love to see videos from you
exact same method as vinyl :D
That’s impressive!
Thank you (:
Why would one want to cover trunk with PPF what a waste of 💰