I also feel like too much overdrive is detrimental in my 4ws. My favorite so far was 1:1 other than an underdrive ar44 gearset in the rear. I think its just shy of 10%. MST portals incorporate a dual idler gear setup rather than planetary. I believe by definition a planetary gearset has a ring gear and a carrier. The transmission does in fact have a true planetary gearset in it.
Its going to be interesting to see you learning 4ws and whats the perfect setup for it. Pangolin had 0 UD/OD, and when I added OD and UD on the capra diffs I think it improved, but idk what im doing 90% of the time 🤷
About panel mounting: could you drill out the panels to 3mm and mount them with m3 buttonhead screws (or m2.5) from the outside? I have m3x8mm buttonheads on mine at hood and roof panel, so I can easily pop off those panels to unbox the rig.
Rethinking things, he is lightweight :) Lightweight makes everything work better. spring length works for these shocks on this rig, try one rate softer front. raise rear uppers a hole or 2 if possible chassis side. for his lightweight 40 ish to 1 is great overall gearing and 1800kv would be fine just put in some throttle curve. black or orange body panels will go with the shocks
Just out of curiosity, why aren’t you working as a designer for one of the big names in RC crawlers? I think we’d all benefit from you making some phone calls.
Brilliant episode Mr C I love learning things even if accidentally 😊🎉
Hey Canyoneros. I hope y’all have a good week 😎💯
I got worried there for a sec. There was no notification for a Crawler Canyon video on the page. Phew!!! Glad I found it.
Howdy👊 I’m gonna be late on Mondays and Wednesdays,I have two welding classes in the afternoon.
Great! I love unboxing videos!
Today was a good day........Ice Cube 🎶 🎵
What about a stealth (matte black) paint job so that the shocks are the only pop of color?
I also feel like too much overdrive is detrimental in my 4ws. My favorite so far was 1:1 other than an underdrive ar44 gearset in the rear. I think its just shy of 10%.
MST portals incorporate a dual idler gear setup rather than planetary. I believe by definition a planetary gearset has a ring gear and a carrier.
The transmission does in fact have a true planetary gearset in it.
Is un-paneling a cage body the same as unboxing?
Its going to be interesting to see you learning 4ws and whats the perfect setup for it. Pangolin had 0 UD/OD, and when I added OD and UD on the capra diffs I think it improved, but idk what im doing 90% of the time 🤷
Wagwan Canyoneros 👊
Sidepanels going to be fun to mount 😂😂,i already can imagine him cursing
Eeeggghh. Uggghhh. You... you... have to... to... TAKE THE WHOLE THING COMPLETELY APART.
It probably took an hour.
Use the new home anodize kit by Sharpie on the shocks. 😉
...or dump it in draincleaner for an hour ....clean as a whistle.🙄
Holmes hobbies has snubnose out runners down to 1000kv the standard revolver 1000 is also good for 6s
About panel mounting: could you drill out the panels to 3mm and mount them with m3 buttonhead screws (or m2.5) from the outside?
I have m3x8mm buttonheads on mine at hood and roof panel, so I can easily pop off those panels to unbox the rig.
Might I recommend some movement (up) to the front of the rear upper links? That may remove that funky twisting.
This is an R1 clone. There are eight link mounts in total, one for each link.
@@CrawlerCanyon You are a craftsman though!!!
We need a gear ratio for dummies video i understand how the gear ratio works but not how you calculate or how to understand calculating it
Yo Mr C you need to finish ICFTW VOL 34 I wanna see the bugger finished lol
I go into crab mode all the time, but I shake my cane at a cloud and it passes. Looks like the gear reduction was just the ticket. Have an unboxing.
What is the canyon color scheme? Did you ever come up with a crawler canyon colors
Thinking caged rigs should have marvel theme,toad,night crawler, Black widow, Domino(lucky to become a thing),
I’m so keen to see the final form this unboxed (caged) rig will take. As noted, it looks so good for learning 4WS as well 🤌
Rethinking things, he is lightweight :) Lightweight makes everything work better. spring length works for these shocks on this rig, try one rate softer front. raise rear uppers a hole or 2 if possible chassis side. for his lightweight 40 ish to 1 is great overall gearing and 1800kv would be fine just put in some throttle curve. black or orange body panels will go with the shocks
I'm using the same servos on my 4wd capra clone and they do the same random twitch's.
It doesn't appear to affect performance, but it sure is weird.
@CrawlerCanyon yep, does it with or without a BEC, I like to think the servo just has just has tourette syndrome.
i was listening... i really was... trying... then there was math, and fractions, and decimal points... then i made a 😐
What are the brand of servos you have on the no name wolverine look-a-like?
You mean on this guy? Smraza! amzn.to/4hgU54N
@CrawlerCanyon yes sir. Thanks for the info. They seem to be a good cheap alternative
You could give away that rig and build another one for the canyon with 4ws on meus nylon axles, so you could experiment with od/ud setups...
Is this OEM Gmade cage or kock off injora ?!
Clone. Amazon. Like 35 bucks.
What’s up
5
Just out of curiosity, why aren’t you working as a designer for one of the big names in RC crawlers? I think we’d all benefit from you making some phone calls.
Yo
Cmon an outrunners not supposed to be that quiet!