Wltoys 124019 speed car, full build!
HTML-код
- Опубликовано: 28 авг 2024
- It is time to attempt my first full build video😕
My dad recently decided to join the competitive but always fun speedrun side of our amazing hobby!
I suggested he get a 124019 because in my opinion it's one of the best platforms for these crazy speeds we chase, for the size of cause.
This may not be the best structured video but I thing I managed to capture the important parts of the build🤞
Any brand shock/diff oils will do👌
Ebay Australia links.
Wltoys 124019 RTR www.ebay.com.a...
WP-SC8 120A 4s ESC
www.ebay.com.a...
Hitec HS-225BB servo
www.ebay.com.a...
Contact wheels front (very cheap)
www.ebay.com.a...
200mm Toyota GT1 body/shell
www.ebay.com.a...
this was the RC car that got me back into the hobby ,my 124019 did 83mph hit a bump in the road and did cartwheels as it exploded down the road wish I had a video of it / awesome video
That's very sad considering it was what got you back into the hobby😥
Hope you have or get another going🤞
Thanks mate, was a mission to film but if it helps you guys I'll give it a go👍
Gday champ...I know its an older vid, But I really, really like this build ay...What a weapon. You did well mate..I'll have to find other vids you've done on it. Thanks for brightening my evening Saul.. Your a legend man, Take care bud!
Thank you😊
Yes I really enjoyed building this for my dad and I'm so happy he enjoys driving it🥹
I haven't filmed alot of builds or repair videos, I get very nervous and anxious due to my speech issues and social anxiety but I need to do more for you guys.
This car specifically I will be making a new splitter for soon as dad likes hitting reflectors at around 100mph and destroyed the one you just saw🤣
I'll definitely film the splitter build and installation.
It's great seeing these cars get built up into speed runners ect. Nice build for your dad 👍 from Me.
I'm love building these things more than driving sometimes😅
Thanks mate👍
Mate, you've done a great job here. You're lightings good and camera shots are really clear. Good work mate 👍🏻
Perfect feedback mate😃🤘
Not only because it's positive but because I always question myself even if the edit is fine🤦
Thank you mate🤝👊
It’s by far the best looking 124019 I’ve ever seen ❤️
Thank you🙂
Working on another one😅
@RC crazy awesome video keep up the good work.
Thank you very much!🙏
Ive been so excied for this! It was deffo worth the wait! Awesome car! Cant wait to see you and Papa Speedrun take this for a blast!
Thanks man😊🤘
I think a few people have been wanting me to give this one a go, it was requested a fair while ago so I need to do it asap.
Glad you enjoyed it👍
Super awesome. A life coach I met keeps telling me not to worry about what others think
We manifest our destiny your vids are really epic bud.
Believe in Total Stardom and you will achieve it.
Epic video bud. I had to absorb all Ive learned the last few days.
You made a professional looking vid I am very impressed 👊😎
Spot on mate👌 if you enjoy what you do then what others think is irrelevant!
Love and live life while you can and you will have achieved what is most important, a feeling of freedom!
You keep blowing me away with your comments man😊🤘
You guys are definitely the reason I keep pushing myself😅
Sweet build and great video! Keep them coming!
Cheers,
-Paul
Thank you very much Paul!
Thanks heaps for watching👍
Great build vid Saul. Really nice. 👍🏼🚗. You can tell when you were drifting that the front wheels always wanted to pull straight. So I think you have a winner there👊🏼
Cheers mate😁🤘
I am very limited in the way of speed builds but I'm slowly finding my preferred set-ups, I love experimenting as you know😅
Have to go for a run soon👌
@@rccrazy I think your doing great. Keep it up👍🏼. Plus we are well overdue for a catch-up. 😩. 🚗🚗🚗
Thanks again mate🤘
As soon as this lockdown stuff is done for we'll catch up for sure man👊😉
Theres nothing left you basically built your own car👍
Well for my dad😊 thanks👍
Yeah I love building these things, it's a bit hard being almost completely self taught but when it all works it feels amazing😃
Great video. Great looking car. I can't wait to see it make its first official soeed runs.
As always mate, thank you so much🤝
I am looking forward to its first true speed run also, come on dad😅👌
@@rccrazy you are quite welcome
What an amazing 👏 😍 work your done bro that thing is awesome 👌
Thanks buddy😁👊
Dad loves it so I'm happy👌
That’s awesome
Thanks👍
👍👍👍👍👍
That cheap paint job looks awesome 👍
Thanks😅👍
Great Video! I Learned a Lot from watching! Thanks for Sharing! 🤗 Im looking forward to more of these Build videos! What do the Droop screws?
Thank you very much😊
I'm glad you got something from it👌
The droop screws are for lowering the car (ride height) need a low chassis so the air is less likely to lift the car at the speed we're going for.
Have the rear a little higher than the front👍
Great video and great infotrmation. Thank you for sharing. Cheers
Thank you🙂
Happy to help if I can👍
@@rccrazy Thank you !
Do the 124019 differentials hold the oil? I do not see any gaskets on the differential case.
Or is it better to use the Team Associated Black grease?
Iv found them to be ok, I have noticed a tiny bit of oil on the outdrives but I think that's from overfilling them a little.
New to the channel, Great video!
Thank you very much, greatly appreciated🙂👍
This build looks phenomenal brother! Quick question... is there option to run a larger pinion with the stock spur gear if you modify the motor mount or go with an aftermarket one? I'm modifying a wl toys 184016 which has the same stock 27t pinion and same spur gear as buggy you're working on here (i believe). The stock motor on the 184016 is a 3400kv brushless motor which stays nice a cool on 3s already (I've upgraded the esc). I was hoping to play around with some gearing to increase my top speed with the stock motor to see what it can do before I upgrade the motor. Any insight or suggestions would be greatly appreciated brother! Cheers!
Thanks mate👍
So I personally have a VERY hard time finding gears for wltoys as they use mod0.7 I think, a very uncommon gear in the rc world from what I've seen.
I would just go to a 4s lipo and esc, run stock motor on 4s then when you top that out you could easily run a 4500kv upto probably 5000kv motor on 4s for speedruns.
After that you would be best off going to mod1 gears as they are so easy to find in many sizes.
The centre shaft is 5mm so you can use a large mod1 5mm bore pinion as a spur gear👌
@@rccrazy Thanks so much brother for your wonderful response and all the help! You've helped me a number of times before with some of my setups. Keep the speed runs coming!
Great job sir...
Thank you🙂👍
What body is that?
Good video man cool build
Thanks😊👍
I'm sure dad will enjoy driving it👌
lot of work but great job 😀👌👍👍😎
Yeah mate it was a mission but we'll worth it👌
Thanks mate😁👍
where you buy the body shell my friend.. you can gave me the link of the shop..?? thank you..😊
I can give you the link but it is only Ebay Australia, if your in Aus then that ok I guess😁
But I'll give you the name and part number to search other places.
Part# M1138 Toyota GT1 200mm
And the brand is Colt
Great job 👏 👍
Thank you😊
Thanks for watching👍
Where did you get the body?
Hopefully I have mine out today and have it uploaded
I got mine from ebay Australia, the links are in the video description.
But I'm sure you could find them elsewhere.🤞
Nice rc channel
Thank you🙂👍
Great job!! Why did you decide to cut the rear wing?
Thanks mate👍
I found on most of these light weight speed cars if you keep the wing at around 120-130kph they like to lift.
I cut the wing on mine and so far have hit 159kph and no sign of lifting, 5s next😁
Hey man. I need your help. Can 225mm wheelbase put in 124019 ?
Do you mean will a 225mm body/shell fit on a 124019?
Where can I order that body?
I got them from ebay Australia.
It's a Toyota GT1 and the brand is Colt.
The link is the one I used but it's only 190mm so it's very hard to fit to these cars.
www.ebay.com.au/itm/125331926145?hash=item1d2e5d6c81:g:G8wAAOSwTB1h7nNk
Im gonna do a wltoys speedy..dunno whether to go 1/10..1/12//or 1/14 tho tbh..think middle and 1/12 like this un maybees
The 124019 is my favourite to build, easiest to find custom shells and parts
@@rccrazy bit like goldilocks porridge bowls.. The 1/14 looks too small to fit a lot of parts..the 1/10 is a bit flexible at the chassis (if I'm thinking right)..after watching Yours & others, I'm gonna grab me a 124019.. Sweet cars for the price tbh
I like that analogy😅
Yeah the middle is just right👌
Just make sure if your going a speed shell (GT style) get 200mm wheel base, don't get 190mm, most are too narrow.
@@rccrazy Thanks for the advice! Big help! 😀
Not a problem😊
What is a "droop screw"?
It's a screw in the swingarms/a-arms, normally a grub screw that sets the ride hight of your car.
They sit on the little tabs on the chassis and if you tighten them the swingarms will raise, shocks will compress and it will lower the car.
May I ask what body that is you used please
It's a Toyota GT1 race car shell, very hard to fit though as it's only 190mm
Thank you 🙏
What size and thickness carbon fiber plate did you use?
Thickness is 2mm and I think I could only get 300x200mm, I found some 400x500 but it was ultra high quality and like $180 Australian a sheet😱
@@rccrazy Thank you for the quick reply, it amazing that 2mm of material can hold two batteries, any reason why you chose to do 2 piece vs 1 full piece?
Yeah it blows my mind sometimes seeing how far we've come with Tech and super strength material in just a few decades👌
The sheets were too short for the body style that's why I wanted the larger sheets, no way I could paying that much for such a small amount though😬
Oh and you just caught me before bed, no problem😅
@@rccrazy Banggood has started shipping CF plate sheets. They are quite reasonably priced
Ok cool, I'll have to have a look.
Thanks👌
what size is the carbon sheet 1mm 2mm???
I use 2mm for 1/10 or smaller and 3mm for cars like my limitless
ok thanks alot i actually got 1.5mm u think that would work or can i double it and make it 3mm its a 124017 wltoys@@rccrazy
If your using it for battery trays aswell as a splitter then I would probably double up, 1.5 may flex with lipos on them.
But for just a splitter 1.5 will be perfect👌
well i was plannin on doing the setup you hve,, i really love it ..i wanted to do the trays and splitter.. so double up for splitters and use the 1.5 for front splitters@@rccrazy
Is it 30mm wheels?
If you mean width then no there 26mm.
I run fronts all round to reduce resistance and friction, not everyone's preference.
@@rccrazy okay thanks for the help
Can't get that body. Others are really expensive.
I got mine from ebay Australia, the link is in the description.
I don't know where else to get them, sorry.
what body are you using
It's a Colt branded Toyota GT1 race car
What body is this?
The brand is Colt and the car is the Toyota GT1 LM race car.
If you plan on getting one to run on this car you must get the 200mm version not the 190mm version.