Absolutely stunning. Well done. Between you and My Mechanics I don't think ANYONE can compete with you two. Unbelievable, what a beauty. I'd just put it on a shelf
Хорошо отреставрировал слов нет, 👍👍👍👍👍. Но лоток для топлива забыл перевернуть, я долго смеялся когда ты ее поджигал. Но работа проделана шикарно молодец Бро.
Bütün videoları sıraya aldım izliyorum. Çok başarılı. Tebrik ederim. Bu Çalışmada atlamış olabileceğiniz bir durum gözüme çarptı. Amacım size asla iş öğretmek değil. Nozulun altındaki tabla ters duruyor. Akan gaz da haliyle oraya değil yere akıyor. Ayrıca bu tablanın bir görevi de pilot alev görevi görüp alevin sürekliliğini sağlamak. Zevkle takip ediyorum. Kolaylıklar diliyorum.
Beautiful finished restoration, one of the best I’ve seen. I have one of these I purchased at a yard sale for $15.00 with the intent of restoring it. Now, thanks to your video, I have an example as to how to do it. Almost like a personal trainer to help. One suggestion though, please don’t use vise grips to break a bolt or nut free for removal as it can leave gouges in the part. I learned that the hard way by having to file away those gouges as they looked terrible. I now always use either a socket or box end wrench the correctly sized. Just some advice for the future. Again, very nice outcome and hope mine looks half as well as yours in the end. Thanks for an entertaining project that gave me a sense of relaxation while watching.
Nicely done, the bowl under the burner was incorrectly installed. This is used to heat the lamp, you pour gasoline into it, let it burn and then light the lamp. Nice greetings from Germany
Hasan Keleş selamlar hasan bey, bende aynı soruyu sorduğumda bilerek yaptığını, çünkü iç kısmının iyi parlamadığını ve görsele hitap edebilmesi için ters takılmasının daha güzel olacağını söylemişti.
Ich denke, du hast die Feuerschahle falsch herum angebaut. Dort drin wird normalerweise zum Aufheizen Spiritus eingefüllt und angezündet. Mit der Öffnung nach unten geht das nicht. Viele Grüße Jörg
Hahahaha...you really had me at 17:35 when I thought for a second the cannister suffered from a crack in the material.....until I relaized it was just the mirrored image from the table in the polished surface...:-). Great job !! (especially the polishing bit :-) :-) )
... оказывается такая красивая старинная вещь, только собрал в обратной последовательности неправильно, потом переделай!-, даже не верится, что она с 1930г выпуска, молодец, отличная получилась работа, выглядит как будто новая, здоровья тебе и удачи во всём!!!
Bravo, bravo, bravo, awesome..., Well done, you are an artist, unique and perfectly work, master done, It's a pleasure to watch this work! respect from the old BG. sori for my english.
This looks very nice. I could do half of the job (disassembly) and then I could maybe clean it up a little bit (not as good as you did) and then I would have to throw it all out because I could never reassemble it again.
I confess when I was disassembling I didn't expect there would be so many parts I guess once I was afraid that I would not be able to collect it. but it is worth trying.
Hi I use the vinger, flour and salt to remove the erosion form my chandelier and left it for 48 hours, but after cleaning it the golden look mived to more like cupper red color. Is there a way to chnagw it back to be more golden? Thank you and also, thanks for the great job you do here and challenging me. Amos
Красивая работа! Только фитиль неправильно установлен и из не совсем подходящего материала, фитиль пучком в латунном кольце нужно плотно вставлять в сам корпус горелки.
Hi Mechaniker, i also try to restore this almost exact type, but i cant get the burnerpart loose from the bottle part, it is very stuck. How did you get it loose? There is no bolt to place a wrench on. Hope you perhaps have a tip? Perhaps a towel around it, and hit it with a hammer?
Buen trabajo, lástima que te equivocaste al poner el recipiente de gasolina para encenderla, lo has puesto al revés y ni podrás encenderla. Lástima porque hiciste un buen trabajo.
thank you. It is true that I am on the airport route. but now I started shooting my videos in a closed place. I used to be making videos in the open air.
As soon as I saw him installing preheat tray upside down I was like, Nooooooooo man hope you not going to try to start it like this!!! I am surprised he didn't spot and fix the issue to test it properly. If you are truly German, please remove Perfect Restoration from the title hahahahaaha
Thank you for watching. Don't forget to ''Subscribe''
Fantatic Job, already subscribed
Are you the same guy who has the RUclips channel My Mechanics ?
Flawless work sir, absolutely beautiful craftsmanship.
This is a work of art. 👍👍
سلام داداش اشتباه سر هم کردی
قسمت آخر رو باید اون قطعه رو برعکس کنی تا گازوئیل اضافه بریزه توی اون
👍
You installed the preheater the wrong way (upside down)
Thank you, it is true 👍
With all the polished brass the thing is too beautiful to use. Another great job. Thanks.
The drip pan is up side down on finished item, but what a real beauty.
Thanks 👍
Good eye
Absolutely stunning. Well done. Between you and My Mechanics I don't think ANYONE can compete with you two. Unbelievable, what a beauty. I'd just put it on a shelf
Sir was that Rammsteins fire frei video 😂😂😂 beautiful work and fantastic reference
😎🤗
Your tray is correct...everyone else's is upside down.,.except in Australia 🤪
😎
Хорошо отреставрировал слов нет, 👍👍👍👍👍. Но лоток для топлива забыл перевернуть, я долго смеялся когда ты ее поджигал. Но работа проделана шикарно молодец Бро.
Thank you, it is true 👍
The Preheat tray is upside down... The Tray/Cup under the spout...
yes you are right, i fixed it later.
Another great restoral the guality of the piece was worth bringing back to new
Lovely work! Also "Washing" is how you spell it.
Bütün videoları sıraya aldım izliyorum. Çok başarılı. Tebrik ederim. Bu Çalışmada atlamış olabileceğiniz bir durum gözüme çarptı. Amacım size asla iş öğretmek değil. Nozulun altındaki tabla ters duruyor. Akan gaz da haliyle oraya değil yere akıyor. Ayrıca bu tablanın bir görevi de pilot alev görevi görüp alevin sürekliliğini sağlamak. Zevkle takip ediyorum. Kolaylıklar diliyorum.
Teşekkürler
Beautiful restoration, unlike other comments I will politely refrain from saying the preheat tray was upside down.
I put that piece upside down knowingly not to use the product. I could not tolerate its use after this restoration.
Then don't mention it Kevin unless of course you're just looking for some kind of credit. Passive aggressive unnecessary comment.
Beautiful finished restoration, one of the best I’ve seen. I have one of these I purchased at a yard sale for $15.00 with the intent of restoring it. Now, thanks to your video, I have an example as to how to do it. Almost like a personal trainer to help. One suggestion though, please don’t use vise grips to break a bolt or nut free for removal as it can leave gouges in the part. I learned that the hard way by having to file away those gouges as they looked terrible. I now always use either a socket or box end wrench the correctly sized. Just some advice for the future. Again, very nice outcome and hope mine looks half as well as yours in the end. Thanks for an entertaining project that gave me a sense of relaxation while watching.
thank you for this nice comment and suggestion.
Wieder klasse gemacht!! Und um uns zu testen hast du das Schälchen unter dem Brenner mal anders herum montiert. Aber wir passen auf
☺😎
17:26 Rammstein - Feuer Frei! :))))) Helal sana :))
🤘🤘
You installed the burner heating pan backwards, please put it in correctly!
I really enjoy your videos,you do fantastic work! How do you remember how everything goes back together?
thanks. I keep some photos. 🙏🏻
Ванночку неправильно установил, как она у тебя еще не взорвалась то) и в итоге поэтому не показал, как работает лампа))
Nicely done, the bowl under the burner was incorrectly installed. This is used to heat the lamp, you pour gasoline into it, let it burn and then light the lamp. Nice greetings from Germany
Thank you, it is true 👍
Louis, thanks for explaining what The pain was used for, it just didn’t make sense for me. But I did definitely notice it was upside down.
Hi bro 👋👋👋 good to see you 🤝🤝🤝 very good restoration blowtorch 👍👍👍
thanks
Всегда пожалуйста 😊 🤝🇷🇺
A GOOD TEST would be Nice!
🙈
Sehr gute Restauration der Lötlampe !
Leider ein Fehler beim Montage unterlaufen daher auch falsche bzw. keine Inbetriebnahme möglich ! 😉
:) usta her seferinde yorumculara bir açık veriyorsun. güzel işçilik yaptın . ayrıca deneme yaparak bitirmek daha güzel olur.
Tebrik ederim harika fakat çanak doğru takılsaydı tam olacaktı.👏👏
Hasan Keleş selamlar hasan bey, bende aynı soruyu sorduğumda bilerek yaptığını, çünkü iç kısmının iyi parlamadığını ve görsele hitap edebilmesi için ters takılmasının daha güzel olacağını söylemişti.
@@mehmetalikarakeci merhabalar teşekkür ederim bilgilendirdiğiniz için mantıklı montaj.
thanks
Looks awesome! The plain brass cannister is much better without the black logo over it!
Now that is a shine :) Top notch collectors piece. Keep it up.
👍
🔥These things are notoriously difficult to use 🔥
The brass is so beautiful!
Yeah Great , but does it Work ?
Gorgeous!
Wie Neid entsteht sieht man auch hier in den Kommentaren. Und die gibt es überall. Ich finde deine Arbeiten sehr gut 👍🏽 weiter so 👏🏽
Feuer Frei! Bang Bang!
🤘🤘🤘
Rammstein need this torch for next concert... 😁
Nice job except the preheater cup is upside down on the finished torch!!! Good looks don't always mean good works!!!!
🙏🌿😊
Didya' gold plate that thing or what ? Nice.👍
🙏
Ich denke, du hast die Feuerschahle falsch herum angebaut. Dort drin wird normalerweise zum Aufheizen Spiritus eingefüllt und angezündet. Mit der Öffnung nach unten geht das nicht. Viele Grüße Jörg
👌🙏🏻
Great restoration, I would have like to see it fired up. beautiful bit of history bought back to life. Thank you for sharing.
ateşlemeye kıyamadım ;)
@@meinemechaniker Canın sağ olsun abbi.
👍
Good job.
Excellent 👏🏼👏🏼👏🏼
Hahahaha...you really had me at 17:35 when I thought for a second the cannister suffered from a crack in the material.....until I relaized it was just the mirrored image from the table in the polished surface...:-). Great job !! (especially the polishing bit :-) :-) )
So you deciphered it. congratulations 👍🏿
The drip pan is up side down at the end.
I punished him. 😅
I just loved the final test, nice job 🤣
😅🙏🏻
... оказывается такая красивая старинная вещь, только собрал в обратной последовательности неправильно, потом переделай!-, даже не верится, что она с 1930г выпуска, молодец, отличная получилась работа, выглядит как будто новая, здоровья тебе и удачи во всём!!!
Spasibo 🙏🏻
The spilling tray is upside down man
Look at the tray when it was dirty... and compare how you assembled it when it was clean. I am familiar with this kind of torches.
I assembled it so that it would not be used.
İspirto koyulacak yeri ters taktın 🤔😉 ama onun dışında mükemmel temizlendi.Güzel iş eline sağlık👏👏👏
Nice shout out to Rammstein 🤘🔥🔥🤘
Thanks 🤘
Tam bir sanat eseri devamını bekliyoruz sizden elinize sağlık 😎👏👏👏👏
Teşekkürler 👍
Nice job Man ! keep doing it!
Thanks mate!
Bravo, bravo, bravo, awesome..., Well done, you are an artist, unique and perfectly work, master done, It's a pleasure to watch this work! respect from the old BG. sori for my english.
👍
Absolutely beautiful...
Thanks 👍
really well done I wish we could see it work ..lol
l wish 😊
This looks very nice. I could do half of the job (disassembly) and then I could maybe clean it up a little bit (not as good as you did) and then I would have to throw it all out because I could never reassemble it again.
I confess when I was disassembling I didn't expect there would be so many parts I guess once I was afraid that I would not be able to collect it. but it is worth trying.
Nice final clip and music⭐
👍
Beautiful work! Thank you
Many thanks!
部品の取り付けが間違ってるところがあるね😂
Bu kadar emek, bu kadar detay ve sonunda harika şeyler. 👏👏👏
👍
Süper eline sağlık güzel çalışma(:
That was a great restoration, but what were you burning ? So sooty .. the preheat pan was as you know upside down.. click bait ? lol
😅😎
Great restoration man! Nice. Keep up the great work.
I'm sorry but it's too late.
Это нихт реставрация, это есть эстетство! Палец ВВЕРХ!..Средний палец, конечно)
👍
Hi
I use the vinger, flour and salt to remove the erosion form my chandelier and left it for 48 hours, but after cleaning it the golden look mived to more like cupper red color. Is there a way to chnagw it back to be more golden? Thank you and also, thanks for the great job you do here and challenging me.
Amos
Hi
Is your chandelier copper or brass?
@Meine Mechaniker it's brass. I found that after cleaning it and polishing the golden color is back. Thank you
no no no the cup is upside down
Hermoso trabajo, te diste cuenta que pusiste el receptor de bencina al revés? He restaurado 3.
Sí, tiene usted razón.
Красивая работа! Только фитиль неправильно установлен и из не совсем подходящего материала, фитиль пучком в латунном кольце нужно плотно вставлять в сам корпус горелки.
спасибо тебе Вы правы. я обращу внимание
Прекрасная работа.
Genial pero el deposito de calentamiento lo armaste al revés, ES LO QUE NESECITAMOS AQUI EN VENEZUELA
Elinize sağlık güzel olmuş. Bende 45lik var küçüğü inşallah bitirmeme az kaldı
Teşekkür ederim. Bende wilton mengene üzerinde çalışıyorum, benimde az kaldı sanırım 👍
Кюветку не той стороной одел! ты бы хоть посмотрел на то как она была изначально если у самого мозгов догадаться не хватило!
Я сделал так, чтобы не использовать его. Понять? там так много труда, что было бы неправильно его использовать.
@@meinemechaniker не слушай этого умника, не нравится пусть не смотрит или сам делом займётся. Всё круто.
Надел.
@@meinemechaniker Человек не может предвидеть, а вдруг придется, да и взорваться может...
I think u hve the tray upside down
Yes, you're right 🍀
restoration is one thing but you also have to know how it works
you are right, if you ask me, watch my wilton or heuer vise restorations.
@@meinemechaniker same question , how old is this and where is this used for?
This product is blowtorch. It was used instead of current industrial blow dryers. after the war before 1990. I think 1970's
Hi Mechaniker, i also try to restore this almost exact type, but i cant get the burnerpart loose from the bottle part, it is very stuck. How did you get it loose? There is no bolt to place a wrench on. Hope you perhaps have a tip? Perhaps a towel around it, and hit it with a hammer?
Buen trabajo, lástima que te equivocaste al poner el recipiente de gasolina para encenderla, lo has puesto al revés y ni podrás encenderla. Lástima porque hiciste un buen trabajo.
eline sağlık
Teşekkür ederim
Love the work. Great job. I don't know how you live in a flight path for the airport...
thank you. It is true that I am on the airport route. but now I started shooting my videos in a closed place. I used to be making videos in the open air.
Well restored only spoiled by that small upside down mishap 👌
knowingly I did it. because he will no longer work and rest.
You’ll never know, unless we all make mistakes. Pity is, some of us continue to do the same thing, and always expect different results. Insanity is:
Üstadım videoların çok güzel hipnoz oluyorum. Bir de ışıklandırmayı çözsen senden iyisi yok.
👍
Is there a mock air battle going on over your house??!!
What is that noise??????
Agradeço o vídeo! 👍✌
👍
Tutto ok..peccato che ai montato il pre accensione al contrario
Job is nice but bath for gasoline is in wrong position...😉👍
😉
Washing up liquid is useful stuff isn't it.
But the rammstain clip?😂
😉
You should test/use the itens you repair.
you are right.
As soon as I saw him installing preheat tray upside down I was like, Nooooooooo man hope you not going to try to start it like this!!!
I am surprised he didn't spot and fix the issue to test it properly.
If you are truly German, please remove Perfect Restoration from the title hahahahaaha
Put the cuvette on the wrong side!
You live by an airport. That noise must drive you mad.
Чашка под горелкой перевернута неправильно
👍
Your heating pan is upside down
yes l know 👍
Тавата за подгрева на лампата е монтиран наобратно 15:39 минута :)! Иначе страхотна реставрация.
I think your work bench needs a restoration
yes it needed restoration and i did it
🤺🤺🤺 şimdi my mechanics düşünsün 🤺🤺🤺 "start the restoration war" Who deserves the iron throne?
Meine Mechaniker'in ruhuyla My Mechanics'in ruhu karşı karşıya gelecek olursa My Mechanics'in ruhu diz çöker tövbe ister.
teşekkür ederim 👍
👍
Куветку переверни! Желательно пауков не разводить.
Если он этот тазик вверх ногами приляпал, где гарантия, что остальные шайбочки, пружинки и жиклёры на своих местах.
wow
👍
your assambly is wrong
bath under the burner is flipped over
Please don't wire brush most of these parts on the next one. It leaves a bad finish
👏👏👏
👍
Do you live next to an airport?
eeeeee there is a mistake,
but nice job, congratulations
👍
👏🏻👏🏻👏🏻👏🏻
takiptemiyiz?
Мастер молодец , сделано отлично. Но , корыто для сбора стекающего бензина под горелкой поставить вверх дном , это конечно перебор,,
Я на самом деле специально попотел. потому что я хотел выставить это вместо того, чтобы использовать это.