How to make 12 volt 5 Amp battery charger at home || DIY battery charger.
HTML-код
- Опубликовано: 25 фев 2017
- Hi Guys here is the new video of my project "How to make 12 volt 5 Amp battery charger at home. DIY battery charger." from "Electrical and electronics projects" "E&EP" Channel.
This is 12 v 5 Amp battery charger do not charge low amp batteries with this your battery will explode you can charge more then 5 Amp batteries with this charger but,will take long time as compare to low amp batteries.
SUBSCRIBE HERE:
ruclips.net/user/ElectricalE...
||***THANKS FOR WATCHING***||
❇FREE ENERGY VIDEO LIST❇
▶ How To Make Free Energy Generator 220V From Washing Machine Motor. DIY Free Energy Generator.
• How To Make Free Energ...
▶ Homemade free energy generator took place as wind turbine.DIY wind turbine generator.
• Homemade free energy g...
▶ Homemade Dynamo Generator 220V Attached To Two Stroke Engine. DIY Free Electricity Dynamo Generator.
• Homemade Dynamo Genera...
▶ Free energy generator homemade 220v attached to bicycle.DIY free electricity generator
• Free energy generator ...
▶ Free energy 220v from washing machine motor Part 2 is Revealed | Hints | DIY Homemade Dynamo.
• Free energy 220v from ...
▶ Making Free Wheel Energy From Microwave Oven Ring Magnets || PART 2
• Video
▶ Making Free Wheel Energy From Microwave Oven Ring Magnets || PART 1
• Video
❇E&EP DIY PROJECTS VIDEOS LIST❇
▶ How to make adjustable 1 to 20 voltage power supply from old PSU.DIY Bench power supply.
• How to make adjustable...
▶ How to make magnetic levitator using ring magnets || DIY Magnetic levitator.
• Video
▶ How to make 12 volt 5 Amp battery charger at home || DIY battery charger.
• How to make 12 volt 5 ...
▶ Without electricity switch board magic charger to prank someone.
• Video
▶ How to make adjustable voltage power supply from computer CPU power supply DIY bench power supply
• How to make selectable...
▶ How to make hot wire foam cutter at home. DIY styrofoam cutter.
• Video
▶ How To Make Knife Sharpener At Home Using Old Hard Drive.DIY Knife Sharpening Machine.
• Video
▶ How To Make Grinder Machine At Home Using PVC Pipe. DIY Grinder Machine
• Video
▶ How to make a Rechargeable Power Bank at Home as Well as Mobile Holder. DIY 2000mAH Power Bank
• Video
▶ How to make a continuity tester at home using 9v battery
• Video
▶ DIY phone holder while charging using 9V battery
• Video
❇AUTOMOBILE / MECHANICAL VIDEOS LIST❇
▶ Assembling CD-70/SR-70 Motorcycle Engine.
• Assembling CD-70/SR-70...
▶ How to assemble CD-70 Gearbox system | Assembling motorcycle Gearbox system.
• How to assemble CD-70 ...
▶ Installing piston and valves to CD-70 motorcycle engine | Head cylinder assemble/disassemble Ct 70
• Installing piston and ...
▶ How to stop oil leaks in CD 70 motorcycle OR how to disassemble/Assemble motorcycle head & cylinder
• How to stop oil leaks ...
▶ How to change clutch plates motorcycle 70cc OR How to install clutch plates to CD-70 motorcycle
• How to change clutch p...
▶ Changing complete chain set of CD-70 with chain cover.
• Changing complete chai...
▶ How to rebuild an engine honda, Honda GX-240 rebuild:
• How to rebuild an engi...
▶ How to repair portable generetor click here:
• How to repair portable...
▶ How to make electric starter for any generator:
• How to make electric s...
❇DIY LED TORCH LIGHTS VIDEOS LIST❇
▶ How To Make a Torch Light at Home Using PVC Pipe
• Video
▶ How to make usb led light for laptop with brightness increase/decrease option
• Video
▶ How To Make LED Flashlight At Home The Easy Way.
• Video
▶ How to make usb led light for laptop
• Video
▶ How to make a led flashlight using bottle's cap
• Video
▶ How to make led torch light:
• Video
▶ how to make rechargeable led torch light at home:
• How to make rechargeab...
❇SOLAR PANELS VIDEOS LIST❇
▶ How to check amperes and voltages of solar panel.
• How to check amperes a...
▶ My complete solar system setup for my home.
• My complete solar syst... Наука
It is true that charging a 12 volt battery needs 14.0-14-4 volts, therefore I think that a limiting resistor would not only bring the voltage down to that but also protect the battery under charge. I am not a tech so I cannot tell what value of resitor is most suitable. All in all a good try though somewhat dangerous. Most important do not forget earthing (grounding for Yanks).
y
This is very good stuff for any batteries: ezbatteriesreconditioning.com
ton c gft
Bkyop
ton c bkore
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Thanks baro bahut achi vidio hai
Very good congratulations for everything !!!
Pls make 24 volt battery charger with charging control for 100ah to 150ah battery video as early as possible. Wait for your reply. Thanks for this 12v charger video.
it is very useful project
I want the circuit of 12 volt power supply using small transformer
Great video, if you want to see other great 12 volt videos Thank you for the content
You should also show the output current !
its basic. anyone building this should put a small heat sink in bridge. or just thermal grease to case with screw. A dc breaker would be great too. A amp meter volt meter great addition.
if you put a limiting resister in the circuit ,the batteries will take far longer to charge and some may not charge at all depending on the type of battery being charged put the resistor in the bin, and you have a decent machine that you dont have to waite too long on the battery being charged,the resistor will just extend the time it takes to charge
Please use a 10ohm 10w fuseble resistor series with the charger output for limitting the current flow.
If I use 12v 10amp transformer, which capacitor i want to use for make that
Boy, good to see sound, safe, reliable third-world fabrication practices demonstrated here..
Good work
is se barey transformer se 12 volt ki batery charge kar skte ha kya
Thanks a lot i really appreciate the effort,creativity,and the kindness you have involve in educating me but what about the battery charger housing where can I get it thanks alot,next time improve on how to construct an automatic one
Great suggestion!
Nice job.
only thing I would suggest is power button installed so ON is up and OFF is down, you have it reversed. Not a big thing, you were in a rush albeit video sped up during the assembly.
brother please make 12 v to 220 local made ups video.
ok, lemme buy some battery charger and dismantle it, and then pretending to teach the world on how to DIY battery charger from scratch.
12v local ups making video.
you should have add voltage regulater with a 12"volt capacitor to make it voltage constant . so that it will not damage your divice with voltage spick.
dude where do you get that box pls tell i really want to know btw great work
John Kill
you can get it from the shop where power supplies or voltage stabilizer are made
SONY TV thanks dude
Nice idea but for the following points:
1/ heatshrink used is too large
2/ bridge should be bolted to chassis
3/ mains cable needs to be properly clamped in plastic clamp designed for the purpose. As is, chafing is possible, and short to chassis danger exists.
4/ no need for capacitor. The type of battery this is designed for IS a big capacitor.
Suggestions :
1/ install a DC current meter so you can see when current stops flowing, indicating charged.
2/ a 9V or 10V secondary would be better. The rectified voltage wouldn't be as high as 19V. Leave this charger on a battery too long, you'll boil your battery.
Nice job Tks for video.
Welcome!
Bhai
Many 30amp ka battry charger bnana h so plz ap mari rahnmai Karen K market s kitny amp Ka transfermar & card lo & osy bnany Ka tarika plz btayen.
Thx
from where did you bought that box?
VERY SIMPLE PERFORMANCE THANKS. !!!!!!!!!!
good and thanx
😅😅😅😅😅😅😅😅
nicc vido
OMG... :D
brother please make more motorcycle repair videos
job great, video👾
Wow
Vidiyo
Great idea. But this charger will bake your battery if you forget to stop charging on right time as this charger does not have auto cut off circuit.
Agar diode ka rectifier bridge ho to diode value ka hoga 5ams transformer ka lia ?
thats a nice sharing
Thank You!!
nice work
Thanks!
Pleeeeeeez create a full video to uses and control multimeter because I can't understand uses of multimeter plezzzzzz
Why are you bothering with a smoothing capacitor? You're putting what's effectively a huge capacitor (a lead-acid battery) across the output anyway! My commercial battery charger for my car generates an unsmoothed full-wave rectified waveform (I checked with an oscilloscope) and does the job just fine. Save expense and soldering and miss out the capacitor.
Good
hi..Is this charger suitable for charging a 12 volt lithium-ion battery .. 40 amps assembled from used laptop batteries?
Sir me isko Direct kish class -d amp me as a power supply use kara sakte ho
Best hai par diot wala dikhao to accha rahega
please release a video of servicing a generator
There is no cut out circuit installed for battery overcharging protection.
Nice video! How about doing a video of 48v battery charger with automatic cut off and protection?
Great suggestion!
mere pass 36amp ki car battery hai ye usko bhi charge kar dega kya Plz reply jaldi karna....
Good power supply
nic
bro so sweet
Thanks!
Niec
Battery aur battery charger ke beech diode lagana chahiye taaki battery ki voltage reverse transformar Ko na jaye
Thanks
Nice video
40ah battery charger banao plzz 12 or 24 v ka
The simplest way to ensure that a battery charger is never overloaded including shorting the output leads is to add a 12V car light bulb (s) of a suitable wattage. I used 2 x 60W (10A) bulbs in parallel on a 9A (yes it should be a 10A transformer). I have run it shorted out for an hour and nothing got too hot. I have a PC fan running in a vented case. Looks evil at night. You can also use different wattage bulbs to limit the current for smal er batteries. WARNING BULBS GET HOT. Nice simple video.
Can we use it for streo
Nice
Bridge rectifier diode se baba ker laga sakte hai
In this if you can add auto cut so that battery will not get overcharged and a fan to dessipate heat would be better.Regards
Só faltou um resistor de 5 ohms em série pra limitar e proteger o carregador de uma simples pane na bateria....
Can you please make a video on 14volt 4amp battery eliminator.
Oh sorry aku pikir tidak pakai fuse.... Good.
I am from Indonesia, if I want to make battery carger for the inverter because it requires a large battery current, I have to make a carger who supply the current to the large battery how much ampere, travo I use for fast charging 12 v battery please
Amp = ampier per hour. If your bettery is 100 amp then a 10 amp charger will take 10 hour to full charge thuritically. Low amp and Long time charge is good for ur battery.
Nice work. Thanks
I think the fuse connection should be interchange to avoid electrical shock.
Will this work well for 100 amp 12V battery. Pls explain.
over charge protection kit use kro bhai
Suppose I have to make 25v 7 amp charger. What should be the rating of transformer?
Thumbs up
Good luck
how many amp bettery charge by this? ( high and low) plz ans me?
nic
Connect wires mechanically prior to soldering. Use the right size of heat shrink. The one you are using is too wide.
Sir thanks,how i collct the instrument,wht is the cost to make that.
This charger can charged 12v 9AH battery full and in how much hours?? Plzzzzz tell me
Il led..... BOOOOOM
Não se coloca capacitor eletrolítico,mas sim um resistor de 1 ohms.... aí sim...
12v 5amp transformer AC or DC transformer
Upto how much Amperes batteries can be charged with this charger ? What is the rating of the fuse ?
good job
Thank You!
you're welcome
We also use PC charger they gives 19v output
Akü şarj aleti yaparken asla kondansatör kullanılmamalı aküya tarbeli votaja ihtiyaç var
safety first.next time please think of safty first .
I have two 6V (4.5AH) batteries.I attached them in series with output of 12.30V. I want to charge them combined in series with 12V ( 2.5A) charger.
Does it work for me?
How much time it will take to fully charge the batteries?
Please suggest me better options?
It will work but will take more time.If you had have a 12v 5 to 6 Amps charger that would be better to fully & quickly charge those batteries.Thanks!
tanx
HELLO SIR AMP CHECK KSE KRTE HA.OR MARKET ME JO CHARGER MOLTE HA WO LIKHA KCH HOTA HA. OR HOTA KCH OR HA PLZ HELP ME.........MERE BATTERY 40AMP KI HA MRE PAS EK CHARGER HA.SLOW CHRG KRTA HA..USKA AMP KSE CHECK KRO ME BOX PE 20AMP LIKHA HA..................................
Sam Smart amp check krne k liye amp meter chahiye vrna multi meter ko amp p set karo..aur sb multimeter alag hai...sasta wale m red cable ka port 2 hai...toh usme se ek m hoga..jisme high amp likha hoga..
ab joh 2 wire batter m jah rhi hai..usme se positive kholo , amp meter k positive se connect karo aur amp meter ka dusra wire..negative wale ko battery k positive terminal m lagai phir amp reading mil jaega.
Can I charge 32 ah lead acid battery??
Can charge with smart phone battery?
Noooooooooooooooooo! Don't charge smart phone batteries with this charger!!
thank
Electrical & Electronics Projects.
Will this charge well 100 amp x 12V battery well?
NOOOOOooooo phone batteries are less than 5 volts, you would fry the phone and battery could explode
can i use a 14 volt transformer instead?
Ye cabinet Kaha buy kiye ....?
merko 12v,9amp ka charger banake dikhao sir
Take 12 V and 9 Amp transformer and the method is same as shown in the video. Thanks
Y lo caliente k se ba poner el tranfornador con k se lo quitas ni un culer le pones la riegas.
nc
good job.
i used it for 100A bsttery ?
Sir ya charger ke body kaha milage
Which fuse use in this eliminator
Good
Can you charge a 12 volt 7 ah battery with this thing?
Yes.
Rather, NOT at any battery! Its 19v. Psu not a charger
A 12-volt battery outputs 14 volts without any lifting or lowering circuits
voltage controller should be used to charge different batteries
Where this cabinets are available?