So glad I purchased this from you installed it today and it works flawless. Your instructions were so dead on easy to install better than any other aftermarket item I've bought for any of my guns. I love how on the 2022 KS7 they hand guard stands off more so you don't even have to use a butter knife to install it and it stays well off from the barrel. Now with the charging handle my KS7 has more metal on it than when I had purchased it. I used to hurt my left hand when I would fire my KS7 with the stock charging grip. Now with your Howitzer muzzle break and this grip is amazing to shoot! Will end up buying all the mods you have other than the 5 I just purchased.
This is the truth for the KS7!!! Just installed this lower rail mod on mine and it's just plain awesome!!! Incredible product that greatly improves the KS7!!! Added weight should lower recoil also!!!
Karl is a straight up honest hard working gentleman. His products from Hi-Tech Custom Concepts are military grade perfect fit products. His picatinny rail and billet charge handle are must haves for the KS G bull pup shotgun. I’m a customer and I’m sold on his products. They are limb and life savers. Try him…….you’ll be highly pleased by his remarkable products, excellent customer service and speedy shipping.
Just wanted to say I had my KS7 for near a year now. I got your safety rail and charging handle (as the stock KS7 was scary with your hands so close to the muzzle) also got your defender muzzle, metal follower though I got the KT rail as it was a bit shorter. But again love the safety handle and like you said the weight balances the recoil out. I run an Eotch EXPS3 and but man your products are built like tanks. Have used minis, bird, buck and slugs or about 5k rounds so far. Use it mainly for range toy or 2 or 3 gun even some skeet lol. And everything has held up fine.
@@edgardolebron6681 I don’t recall exact amount but I think it wasn’t much. I bought a couple options and returned what I didn’t end up using and Carl was really great about it. I ended up using the vertical grip rather than the handle. But both are great. I’d definitely buy again from them.
Great video! Thanks. I've been looking forward to this post. I appreciate you taking the time to make it and the care and attention to detail that y'all continue to put into your products.
thanks for the information you should do a new video of a update of the new law with all the upgrades that you can do to your KS7 in NY state would love to see it and hear what you say about it💪🏼💪🏼💪🏼
We definitely tried to machine it as thin as we could on the side plates to make the assembly. It's less then 1/4" on the thickness of the material. It works good this way with no permanent modification to your original KS7. Thank you. Karl, www.HITECHCC.com
Hello. The KSG/KS7 is a manual pump shotgun that holds less than 10 shells per manual tube. So it does not follow assault weapon rules. We sell these upgrades to customers in NY, NJ, CT and CA every day of the week. Thank you for your support. best regards. Karl, www.HITECHCC.com
Question. Why is the handle on the ks7 hollow? Been wondering since I’ve purchased. I stuck a couple mini shells in there along with some dryer lint to stop them from shaking around then rubber grip capped it…
Yes we do. On the KSG you dont need the lower rail mod through because it's already built in. See our link here: www.hitechcc.com/product/HTC-101.html Thank you. Karl, www.HITECHCC.com
Looks great and will save my non shooting thumb on my KS7 but one big problem! You took away the m lock slots on the pump where I have my weapons light!?!?!? Real-estate is already scarce on the KS7? Would've loved this if those mounting slots had been replaced with more slots....picatinny will have to do!!!
We actually have a 3" side mounting picatinny rail that mounts to the outside of the lower Rail Mod. So that will solves the problem. It's an add on option when you select the Lower Rail mod. www.hitechcc.com/product/HTC-123.html Thank you. Karl www.HITECHCC.com
Been another year, im curious if you are still getting notifications on comments? If so... Anyway you could do a quick video on the KSG QD sling mounts you sell? Doesn't seem to be any info on youtube, and the website doesnt exactly have the greatest photos. Id love to see how its attached... Im on the fence, and actually have two in my cart now... But I'd love a tad more info before I pull the trigger.
Just email us as sales@hitechcc.com and I can send you the installation instructions along with close up photos. Thank you. Karl, Hi-Tech Custom Concepts
@@karlhi-tech7853 Thanks for the reply... I just went ahead and ordered. I'll figure it out when they get here... And however it works, it's GOT to be better than having to take it apart, just to break the gun down (I.E. usinging the take down pins). Thanks for the reply, and the above and beyond offer. 👍🏻 Joe
I just bought a KS7 and was looking at a muzzle brake. I live in NY and thought they were illegal. Thoughts? I will be purchasing the lower rail mod soon. Thanks.
Hi. We will look into that for sure. But due to very high metal prices recently, the cost of it might be a bit extreme. Thank you for the suggestion. Best regards. Karl, www.HITECHCC.com
Hi, just found your website, recently bought a used ksg with an insane looking muzzle break that turned out to be one of your howitzer muzzle breaks. Quick question what set up for a lazer/flash light would you best recommend on the ksg that has one of your howitzer muzzle breaks on it?
We have the side laser/light with mini-rail combo pack that would work perfect. www.hitechcc.com/product/htc-baldr-pro.html Thank you. Best regards. Karl, www.HITECHCC.com
Do you know if the muzzle brake and the charging handle legally in California? Because I am buying ks7 and would like to do some upgrades on it just worry about restrictions in California
On some KS7's, the plastic molding conracted tighter from the molds at Kel-tec. Not consitant. So we have shorter screws available to send if you need them. Just let us know how it fits initially. We can resolve most issues with no problems. Thank you. Karl, Hi-Tech Custom Concepts Inc.
Motorcycles you say? Consider me tickled! I bought some stuff from you for my KSG, if you start things for motorcycles, I'd be highly interested! PS - only metric bikes though ;)
Good morning. Yes we have a few items we already made for the KSG410 on our site. Including the selector switch and Lower Rail Mod for a Charging handle. They are on our KSG-410 section on our site! Thank you for asking. Karl, Hi-Tech Custom Concepts Inc.
Yes we sell the vertical grip, but it must be used on our Lower Rail Mod we designed for the KS7. Please see our KS7 section on our website. Thank you. Karl, www.HITECHCC.com
@@karlhi-tech7853 is that the combo set with tail and vertical grip also does the grip come with an extension included? I have very large hands that grip looks tiny
Sorry I forgot to active inventory tracking for that item. It is definitely in stock. We have been shipping them out every day. Now inventory tracking is live. Thank you for letting me know. Karl, www.HITECHCC.com
Here is a link. I assure you all payments are secure. If you want you can even checkout using paypal and they process the card on their backend. We do not handle and credit card information ourselves, it is all automated. Thank you. Karl, www.HITECHCC.com www.hitechcc.com/product/HTC-101.html
We do try to minimize weight as much as possible, but our upgrades make the KS7 much safer. Plus that little extra weight actually helps absorb some of that recoil a little better. Remember even with the KS7, you have to add on some optics, grips and brakes. That increases the weight on top of the KSG also. We try our best to balance function with weight. Thank you. Karl, HI-Tech Custom Concepts Inc.
You can clean the bore with it on. If you need to clean the shell tubes, you would have to do an "extensive" breakdown anyhow. So you just remove it and reinstall afterwards. To get to the feed tubes requires you to take apart the KSG quite far. Hope that helps out. Best regards. Karl, www.HITECHCC.com
@@ThUgGiShRuGgIsH559 Yes you can use any ammunition with our muzzle brake. 00-Buck, birdshot or slugs. I have even seen a customer shoot the dragonsbreath through it! but he was wearing a fire proof vest and a face shield.. lol. Always wear proctective eyewear and gloves any time you are testing new ammunition just to be on the safe side. Best regards. Karl, www.HITECHCC.com
@@karlhi-tech7853 hmmmm ok i have purchased the muzzle break and the paper that came with it said do not shoot birdshot then i have seen people shoot birdshot with it so i was confused thanks for the the info... im loving my ks7 with your products
Disappointing that their is no relief for customers who supported you product. I know up grades are part of life, but this is a safety issue? Maybe a combo pack and verify it for discount. I bought both platforms.
If you contact us and have a package order we always try to help customers out with package discounts. So please just email us and we would be happy to help out. Thank you for your support. Best regards. Karl, www.HITECHCC.com
So glad I purchased this from you installed it today and it works flawless. Your instructions were so dead on easy to install better than any other aftermarket item I've bought for any of my guns. I love how on the 2022 KS7 they hand guard stands off more so you don't even have to use a butter knife to install it and it stays well off from the barrel. Now with the charging handle my KS7 has more metal on it than when I had purchased it. I used to hurt my left hand when I would fire my KS7 with the stock charging grip. Now with your Howitzer muzzle break and this grip is amazing to shoot! Will end up buying all the mods you have other than the 5 I just purchased.
We really appreciate your support and thank you for your feedback. Have a great 4th of July weekend. Karl, www.HITECHCC.com
I really love the products you make for the KS7 Karl! you guys make quality sensible options for mods!
We appreciate your support! Thank you. Karl, HI-Tech Custom Concepts Inc.
I bought all your upgrades for the KS7, highly recommend your products!!! Made in the 🇺🇸 Stay healthy and I wish your company the very best.
We really appreciate your support! Have a great week. Karl, Hi-Tech Custom Concepts. www.HITECHCC.com
This is the truth for the KS7!!! Just installed this lower rail mod on mine and it's just plain awesome!!! Incredible product that greatly improves the KS7!!! Added weight should lower recoil also!!!
Is there a video on how to install?
@J. Max I haven't seen a video on installation but it's straight forward and very simple. Comes with great instructions.
Bought a KS-7. Added your howitzer to it. My wife loves firing it.❤
Aweomse! Thank you for your support. Have a great week! Best regards. Karl, www.HITECHCC.com
Karl is a straight up honest hard working gentleman.
His products from Hi-Tech Custom Concepts are military grade perfect fit products.
His picatinny rail and billet charge handle are must haves for the KS G bull pup shotgun.
I’m a customer and I’m sold on his products.
They are limb and life savers.
Try him…….you’ll be highly pleased by his remarkable products, excellent customer service and speedy shipping.
Just wanted to say I had my KS7 for near a year now. I got your safety rail and charging handle (as the stock KS7 was scary with your hands so close to the muzzle) also got your defender muzzle, metal follower though I got the KT rail as it was a bit shorter. But again love the safety handle and like you said the weight balances the recoil out. I run an Eotch EXPS3 and but man your products are built like tanks. Have used minis, bird, buck and slugs or about 5k rounds so far. Use it mainly for range toy or 2 or 3 gun even some skeet lol. And everything has held up fine.
Awesome! Thank you for the comment. Stay safe! Karl, www.HITECHCC.com
I have one and it works great. Awesome customer service, too.
@@edgardolebron6681 I don’t recall exact amount but I think it wasn’t much. I bought a couple options and returned what I didn’t end up using and Carl was really great about it. I ended up using the vertical grip rather than the handle. But both are great. I’d definitely buy again from them.
I love every upgrade I bought for my KSG from you guys
Great video! Thanks. I've been looking forward to this post. I appreciate you taking the time to make it and the care and attention to detail that y'all continue to put into your products.
I’ll be grabbing all
Upgrades for my Ks7
Hey I got every accessory y’all sell for the KSG . I’m very happy with everything.
I want the kydex cheek rest!
Keeping fingers and hands safe! Thanks.
Hell yea! 👍
I luv my charging handle, did a lil grind on plastic to add crimson trace green dot!
thanks for the information you should do a new video of a update of the new law with all the upgrades that you can do to your KS7 in NY state would love to see it and hear what you say about it💪🏼💪🏼💪🏼
My only complaint is how chunky/blocky it is... I just wish it was a little more low profile and a bit lighter.
We definitely tried to machine it as thin as we could on the side plates to make the assembly. It's less then 1/4" on the thickness of the material. It works good this way with no permanent modification to your original KS7. Thank you. Karl, www.HITECHCC.com
I kinda dig the chunky, brutalist look - it fits with the whole Blade Runner-esque image 😎
Love your products, always look forward to putting your parts on my KSGs. Y’all keep it up and stay safe
That's awesome.....definitely going to get it.
Make the sides and bottom mlok compatible and I'm sold.
Hey there I have a Ks7 and I live in upstate NY and I want it to know if I can do this upgrade on my ks7 with no problem with the new NY law in 2024 ?
Hello. The KSG/KS7 is a manual pump shotgun that holds less than 10 shells per manual tube. So it does not follow assault weapon rules. We sell these upgrades to customers in NY, NJ, CT and CA every day of the week. Thank you for your support. best regards. Karl, www.HITECHCC.com
the bulltac is ready for your upgrages.
Question. Why is the handle on the ks7 hollow? Been wondering since I’ve purchased. I stuck a couple mini shells in there along with some dryer lint to stop them from shaking around then rubber grip capped it…
Yes people have used a rubber grip to cap it and put something inside. That's up to what you want to do. But what you did sounds fine.
Hi I just bought the striker w the pump rail.. and muzzle breaker .. spent 280.. do I get the 7 card nylon for free too? Just order mine today?
Indeed you do. It's automatically included when we are packing up orders. Thank you for your support! Have a great day. Karl, www.HITECHCC.com
Nice, but do you make something like this for the KSG?
Yes we do. On the KSG you dont need the lower rail mod through because it's already built in. See our link here: www.hitechcc.com/product/HTC-101.html
Thank you. Karl, www.HITECHCC.com
I’m curious…
Why not make MLOK slots in it instead of random circles? Would you have to pay a royalty to Magpul?
Looks great and will save my non shooting thumb on my KS7 but one big problem! You took away the m lock slots on the pump where I have my weapons light!?!?!? Real-estate is already scarce on the KS7? Would've loved this if those mounting slots had been replaced with more slots....picatinny will have to do!!!
We actually have a 3" side mounting picatinny rail that mounts to the outside of the lower Rail Mod. So that will solves the problem. It's an add on option when you select the Lower Rail mod. www.hitechcc.com/product/HTC-123.html
Thank you. Karl www.HITECHCC.com
Been another year, im curious if you are still getting notifications on comments?
If so... Anyway you could do a quick video on the KSG QD sling mounts you sell? Doesn't seem to be any info on youtube, and the website doesnt exactly have the greatest photos.
Id love to see how its attached... Im on the fence, and actually have two in my cart now... But I'd love a tad more info before I pull the trigger.
Just email us as sales@hitechcc.com and I can send you the installation instructions along with close up photos. Thank you. Karl, Hi-Tech Custom Concepts
@@karlhi-tech7853 Thanks for the reply... I just went ahead and ordered. I'll figure it out when they get here... And however it works, it's GOT to be better than having to take it apart, just to break the gun down (I.E. usinging the take down pins).
Thanks for the reply, and the above and beyond offer.
👍🏻
Joe
I need kydex cheek rest
I just bought a KS7 and was looking at a muzzle brake. I live in NY and thought they were illegal. Thoughts? I will be purchasing the lower rail mod soon. Thanks.
This is a manual pump shotgun with less than 10 rounds per tube capacity. Does not fall under assault rifle restrictions.
@@karlhi-tech7853 Thanks for the info.
Is there any chance you guys can make the the handrail that comes stock on the KS7 out of metal
Hi. We will look into that for sure. But due to very high metal prices recently, the cost of it might be a bit extreme. Thank you for the suggestion. Best regards. Karl, www.HITECHCC.com
Hi, just found your website, recently bought a used ksg with an insane looking muzzle break that turned out to be one of your howitzer muzzle breaks. Quick question what set up for a lazer/flash light would you best recommend on the ksg that has one of your howitzer muzzle breaks on it?
We have the side laser/light with mini-rail combo pack that would work perfect. www.hitechcc.com/product/htc-baldr-pro.html
Thank you. Best regards. Karl, www.HITECHCC.com
Do you know if the muzzle brake and the charging handle legally in California? Because I am buying ks7 and would like to do some upgrades on it just worry about restrictions in California
I heard the mounting hardware scratches the barrel after you cycle it once.
On some KS7's, the plastic molding conracted tighter from the molds at Kel-tec. Not consitant. So we have shorter screws available to send if you need them. Just let us know how it fits initially. We can resolve most issues with no problems. Thank you. Karl, Hi-Tech Custom Concepts Inc.
@@karlhi-tech7853 will do. Thank you!
Were do I go to purchase your products because I want to customized my keltec ks7
Just go to our website under the "KS7 Only Upgrades" Tab. See the link here: www.hitechcc.com/category/ks7.html
Thank you. Karl
www.hitechcc.com
Which one's better that one or the one that goes straight up and down for the ks7
Both charging handles are equally good. It's just a matter of personal preference. Good luck.
Karl, www.HITECHCC.com
Motorcycles you say? Consider me tickled! I bought some stuff from you for my KSG, if you start things for motorcycles, I'd be highly interested! PS - only metric bikes though ;)
Karl! Will you offer your pump slide handle for the brand new. KSG .410 coming out in July of 2023?
it will fit as far as I'm aware, from my prior research and knowledge the dimensions and the outer specs of the ks7 and ksg410 are the same.
Where are you guys!?
Good morning. We are in Mt.Vernon, NY. You can email us with any questions at Sales@hitechcc.com Thank you Karl, Hi-Tech Custom Concepts Inc.
Any chance you guys are doing accessories for the KSG410?
Good morning. Yes we have a few items we already made for the KSG410 on our site. Including the selector switch and Lower Rail Mod for a Charging handle. They are on our KSG-410 section on our site! Thank you for asking. Karl, Hi-Tech Custom Concepts Inc.
You think you could do special midnight bronze colored parts to match those guns?
We will look into that. The problem is we need to do larger batches to get the Anodizing cost down. Stay tuned. 👍
Yes midnight bronze products will be nice ..
Take my money!!
Are you still located in Mount Vernon?
Yes indeed! Our address is on our website. But we are strictly manufacturing and shipping here. www.HITECHCC.com
Will the howitzer 70 work with the Iwi Ts12?
No I'm sorry the IWi has a different way to attach. Thank you for your interest. Best regards
Karl, www.HITECHCC.com
So they sell the VERTICAL GRIP please respond
Yes we sell the vertical grip, but it must be used on our Lower Rail Mod we designed for the KS7. Please see our KS7 section on our website. Thank you. Karl, www.HITECHCC.com
@@karlhi-tech7853 Is that the combo set with rail I see online ?? Also does it have an extension before I order I have large hands
@@karlhi-tech7853 is that the combo set with tail and vertical grip also does the grip come with an extension included? I have very large hands that grip looks tiny
Q: why use a phillips screws instead of allen screws?
Because the allen head screws would stick out too much. We were trying to keep it low profile. They work great. Thank you. Karl, www.HITECHCC.com
Is their a video on how to installe. Having some difficulties.
Any luck getting it installed?
It doesn’t show any rail mods in stock like most of your other items do. Is this currently ready to ship?
Sorry I forgot to active inventory tracking for that item. It is definitely in stock. We have been shipping them out every day. Now inventory tracking is live. Thank you for letting me know. Karl, www.HITECHCC.com
Thanks for the quick response …order placed
Received everything today …super fast shipping
Shit yes! Sold!
Hello. Would you guys mind if I did a photo/write up review for one of these that I'll post on forums, sites, and FB groups?
We would love that. Thank you very much for your support! Karl, Hi-Tech Custom Concepts Inc.
Where can i order the grip? The website says it unsecure
Here is a link. I assure you all payments are secure. If you want you can even checkout using paypal and they process the card on their backend. We do not handle and credit card information ourselves, it is all automated. Thank you. Karl, www.HITECHCC.com
www.hitechcc.com/product/HTC-101.html
Adding all that stuff takes away the light-weight aspect of the KS7...May as buy a KSG if they are going to weigh the same
We do try to minimize weight as much as possible, but our upgrades make the KS7 much safer. Plus that little extra weight actually helps absorb some of that recoil a little better. Remember even with the KS7, you have to add on some optics, grips and brakes. That increases the weight on top of the KSG also. We try our best to balance function with weight. Thank you. Karl, HI-Tech Custom Concepts Inc.
@@karlhi-tech7853 i do plan to buy your follower , brake , picatinny rail and butt pad.
@@signkutter9218 Awesome! Thank you for your support. Karl, www.HITECHCC.com
how can you clean the tube with the muzzle break on it
You can clean the bore with it on. If you need to clean the shell tubes, you would have to do an "extensive" breakdown anyhow. So you just remove it and reinstall afterwards. To get to the feed tubes requires you to take apart the KSG quite far. Hope that helps out. Best regards. Karl, www.HITECHCC.com
thank you for the feed back i feel good now installing mine @@karlhi-tech7853
@@karlhi-tech7853 can you shoot birdshot with that muzzle break
@@ThUgGiShRuGgIsH559 Yes you can use any ammunition with our muzzle brake. 00-Buck, birdshot or slugs. I have even seen a customer shoot the dragonsbreath through it! but he was wearing a fire proof vest and a face shield.. lol. Always wear proctective eyewear and gloves any time you are testing new ammunition just to be on the safe side. Best regards. Karl, www.HITECHCC.com
@@karlhi-tech7853 hmmmm ok i have purchased the muzzle break and the paper that came with it said do not shoot birdshot then i have seen people shoot birdshot with it so i was confused thanks for the the info... im loving my ks7 with your products
Karl gotta send me one of those rail mods I remember I was one of the first to ask you to make it! Hook 🪝 me up!
Video starts at 4:40
Got the clot shot....
Disappointing that their is no relief for customers who supported you product. I know up grades are part of life, but this is a safety issue? Maybe a combo pack and verify it for discount. I bought both platforms.
If you contact us and have a package order we always try to help customers out with package discounts. So please just email us and we would be happy to help out. Thank you for your support. Best regards. Karl, www.HITECHCC.com
looks loud
Dude it adds like almost 2 pounds to the gun. You couldn’t fabricate a lighter one. My bad I see the combat one. Nevermind.