Great video! Btw perhaps write model numbers of tools fixed in video description, then would find these videos with easily with google. I randomly found Your videos by searching how to fix Skil drill. Again, great videos!
Happy Easter and thanks for a great vid again! When I saw that DTD146 in the box I expected a faulty trigger, but wrong guess. A sidenote for the DHR242; that plastic cap got a modification 451533-2 got replaced by 455393-4. They made it all round and removed the square plastic bits inside to prevent it from jamming. Just make sure to remove the rubber sleeve on that cap on reassemby and only use the metal steel ring else it won't work.
This was awesome, I have the same router and most is those tools. The router and it’s sisters the M12v model are quite common in Canada and North America. Thank you.
I have it on good authority that baby Dean, shortly after birth, was observed to pick up a spanner in one little hand, and a screwdriver in the other. 😮 Man is B. O. S. S. 👍😊 Cheers
I've made the mistake of disassembling my makita drill gearbox after the motor broke and now can't get it back together after watching many of your videos I may give it another go
What is the grease he uses for the inside of the drills and rotary hammers I recently topped up one of my tools, and the only thing I could find was automotive grease lithium and it is flowing out of the drill when it gets hot
I have a question Dean. I have an old circular saw that needs brushes, but they are discontinued. I've looked everywhere, and cant find suitable replacements. The trouble is, the deisgn of the brushes isn't standard. As far as i know, they will fit this saw, and only this saw. Any suggestions?
Great video!
Btw perhaps write model numbers of tools fixed in video description, then would find these videos with easily with google. I randomly found Your videos by searching how to fix Skil drill.
Again, great videos!
Happy Easter and thanks for a great vid again! When I saw that DTD146 in the box I expected a faulty trigger, but wrong guess.
A sidenote for the DHR242; that plastic cap got a modification 451533-2 got replaced by 455393-4.
They made it all round and removed the square plastic bits inside to prevent it from jamming.
Just make sure to remove the rubber sleeve on that cap on reassemby and only use the metal steel ring else it won't work.
Nice job Dean. Looking forward to the next video
Coming soon!
Best videos about,I haven’t a clue about tools but I look forward to seeing these.
Finally a Makita tool I’ve opened that you haven’t. 😂
Happy Easter Dean Thanks enjoying your videos
Same to you!
Great way to start my sunday morning! Thanks Dean!
its 8am here in Los Angeles and im doing the old hurkle and durkle watching this great video. 👍
This was awesome, I have the same router and most is those tools. The router and it’s sisters the M12v model are quite common in Canada and North America. Thank you.
I have it on good authority that baby Dean, shortly after birth, was observed to pick up a spanner in one little hand, and a screwdriver in the other. 😮 Man is B. O. S. S. 👍😊 Cheers
Great video 📹 👍 thanks again for your video living the dream in the Philippines 🇵🇭 love your video 📹 ❤️ 😊
Congratulations for the 100k subscribers 🎉
Thank you so much 😀
I made this two additional engages for my oldy DDF480 (drilled two holes and put two micro-bolts with conical heads). Works fine. Thanks!
Perfect video to start my morning
Very good weekend
Another great video Dean .
Thanks 👍
Tools fixed in this "Easter Special" video:
1:40 Hitachi TR-8 Router Fault: Bad bearing
15:33 Makita DHR242 SDS Drill Fault: Chuck (Note: DHR243 has removable chuck, so its an improvement)
24:57 Makita DSS611 Circular saw Fault: Loose base (possibly)
29:32 Makita DTD146 Impact Fault: Motor
34:36 Makita DHP459 Drill Fault: Gear selector
47:01 Makita DCG180 Caulking gun Fault: None/In working condition
Hi, why do brushes need this lead ? Tools working fine without it
Thanks for another great video!
They can run without the lead, but they can start and stop sometimes. Also it can cause them to produce unwanted extra heat. Safer to replace
I've made the mistake of disassembling my makita drill gearbox after the motor broke and now can't get it back together after watching many of your videos I may give it another go
Same here. I have a brushed model sitting on the bench in pieces too
Congratulations 🎉 for 100K subs.
Thank you so much 😀
Great video again, how come no one puts the fault on a ticket when taking these tools in for repair?
I was wondering too, and not having phone number of the customer like how does customer know when its finished
Happy Easter mate. Top stuff as always
Same to you!
love me some makita repairs
It seems your job is never coming to an end, does it tell us all about the bad quality stuff...even big brands seems to fail often ,
Nice repair work.Happy Easter
Thanks, you too!
Congrats on 100k subs!
I never knew you could use a center punch the other way up.
I need to fix mine.. Dean what you do?
What is the grease he uses for the inside of the drills and rotary hammers I recently topped up one of my tools, and the only thing I could find was automotive grease lithium and it is flowing out of the drill when it gets hot
the darker brown grease he uses is from Bosch, the lighter stuff is a Makita grease iirc
Happy Easter 🐰
You too
I have a question Dean. I have an old circular saw that needs brushes, but they are discontinued. I've looked everywhere, and cant find suitable replacements. The trouble is, the deisgn of the brushes isn't standard. As far as i know, they will fit this saw, and only this saw. Any suggestions?
No brand makes similar ones that you can file to size or at least for the brush even if you have to change the connectors ?
where is this repair shop
Ден, по какой причине горит плата управления на makita dss610?
Oh what a feast.keep doing videos.By the way dont you come across a tough screw to open.Do you use WD40 any time?
I dont think so its surrounded with plastic so it doesnt corode plus its not in the elements like car bolts
I'm going to send you my hart cordless drill and bauer, craftsman, porter cable and Hercules cordless tools for you to fix
Do you sell any tools ?
Not personally. But the hardware shop I work for do
Do you not bother to replace the rubber coller on the impact driver?
Its a brushed 2014 machine, doubt they still sell that part for it.
It's always the first thing to get knocked of or lost. Iv always found it pointless replacing them.
Why dont you ever true the comm plate?
15:09 RIP the router bit tip 😂😂😂
The bench is rubber and wood. The bit will be fine
Cool
🙌