Bill the Handyman demonstrates how to replace a faulty spray nozzle in the kitchen in less than five minutes. Visit www.BillTheHandyman.info for more how-to tips and tricks.
Oh my goodness, I could literally give you a hug right now, I have fought for over an hr trying to replace the whole thing and had no idea how to get it until I found your video. Thanks so much, from a desperate mom that can't afford a plumber. You are such a blessing ! Thank you sir!
thank you so much for showing the trick on how to install that little clip! this is the first of 7 videos that I have checked out - that actually SHOW how to easily complete the entire project!
Thank you Bill We struggled for awhile until we looked up your video. Thanks to your concise and easy to follow instructions we completed the task in less than five minutes. THANK YOU
Refreshing to see an honest repairman that uses the new assembly parts instead of reusing the used ones. I've been plagued with the tasks of replacing aged crumbling mounting nuts, leaky washers, and a cracked hose guide as they fail one by one since I paid the plumber to replace the faucet and sprayer 2 years ago. Thanks for the lesson!
Thank you Bill, I rent and I wanted to replace my mozle because it was broke. I didn't want the landlord to have to pay for a repair man. If it wasn't for you showing the hidden clip I would have never got it done. I had looked and looked and you are the only one that showed the hidden clip. Thank you so much.
This was so helpful I was having a heck of a time figuring out how to get the bottom part off my sprayer hose. Watching you experience the exact same thing and how to do it without destroying my hose! Thanks so much for your video!!!
Thanks for the video, Bill! I had everything except for how to get that little retention ring back on there. Watching you use the pliers to squeeze it into place was a big help.
thank you Bill!...l I went to many other sights to see how to take off the end where the ring was holding it together and you were the only one that showed me how to take it off easy but needed to know to replace it..
You have given us a great service, by showing the actual issues that arise upon deassembly. Others have it "pre-done" so all goes smoothly. Most of us, hit the problems such as your ring issue, and that stalls us. You have my sincere respect for being helpful, not perfect.
Thank you so so so much, Bill. After watching your vedio showing how to replace the sprayer head by removing the half-circled metal clip, I was finally able to replace my leaky kitchen sprayer which had been dripping for several months.
This is just what the doctor ordered! I've been going nuts with my kitchen sprayer sticking...not sticking. Glad to know they can easily be replaced ... and just how to do it to! Thanks Bill!
Thank you! I used your video to replace my sprayer myself and saved myself much needed funds for home repairs. I had a different model, and I did have to figure out that there was not just a metal ring, but also a rubber ring, but your video helped me understand the basic functions, and I finally figured it out.
Thanks, I watched your vid and ran out to the hardware store to buy a new sprayer. I felt confident that your instructions would help me and they did. I had a hard time getting off that tiny Ratainer Clip and getting a new one on again. The sprayer leaks a little from the silver collar but it's better than the old sprayer which quit spraying this one is not a strong spray but it's better than the old one. BTW, you saved me a lot of money too. I was looking at the Delta replacement (hose and sprayer) for $45.00 + my plumber's fee, until I saw your video and realized I could replace just the sprayer from the hardware store for $7.00.
That was one of the more useful short videos I have watched... thank you, you saved me a ton of time and it appears this is a generic fix for probably many spray heads.
Thank you, sir, you saved me $50 :-) Ordered a new nozzle (but one which came with a hose attached), and with a few relevant revisions to your video, I got it on. Interestingly, the new Moen nozzle screws in half with the upper half containing the part that was causing the issue (a sticking diverter). I did not want to attach a new hose as the old one was really not old (under four years) and in a very inconvenient position above my under-the-sink dishwasher.
Thank you! A number of other DIY videos didn't show the details, skipping the bit about the metal c ring that was preventing my sprayer hose bits from coming off, driving me mad trying to figure it out.
watching how easy you did this makes me wonder why I have had my sprayer laying in the sink for months on end...Hope I manage after watching you... Wish me luck!!
Thank you very much for this helpful, useful video! It's perfect, and I do appreciate your service in bothering to create and publish it. :-) (You really did do a great job.)
My sprayer isn't the same as this. The coupling doesn't fit far enough down on the hose. So when I hook it up it works fine but if I barely tug on the hose it leaks every where. Not all hoses are the same.
I tried to replace the handle as the trigger lever broke off I can still use it but have hold the trigger on. Went down to my local walmart bought a handle like you show washer ,clip and all but mine leaks like a sieve. Im not sure what he deal is but Im taking the new one back and may go to hardware store for some help.
thank you for the video! I'm still trying to find a replacement head, and so far we keep getting redirected to buying an entire faucet and head set 😠. I'll be sure to keep looking for the sprayer heads! I wish I could just remove it completely sometimes, it's such a nuisance.
After I screw off the old sprayer, my sprayer hose is NOT protruding from the old sprayer and I can find NO clip. I do see something that looks like plastic prongs, like those of a diamond ring, so I can't get the old one to release! I tried to simply replace the old sprayer with the new one, but it's still leaking like crazy. IF I cut it off the hose, how will the new piece 'stick' to the hose? Please, please help!
I have a sprayer that sprays (SPLASHES) water everywhere the moment I press the lever. So, I never use the sprayer. I don't know what is the reason for it (high pressure?) but the faucet's water output is so LOW that it takes forever to fill a 5-quart pasta pot. How to FIX this?
I came here because I couldn't find any clip and thought I was doing something wrong. Apparently the one I have is not made with a clip so now I have to return the head I bought and buy an entire set up of hose, etc.
Oh my goodness, I could literally give you a hug right now, I have fought for over an hr trying to replace the whole thing and had no idea how to get it until I found your video. Thanks so much, from a desperate mom that can't afford a plumber. You are such a blessing ! Thank you sir!
thank you so much for showing the trick on how to install that little clip!
this is the first of 7 videos that I have checked out - that actually SHOW how to easily complete the entire project!
Like you, I struggled with the little clip for a minute and then succeeded. Thanks for taking the time to make this video!
Thank you Bill We struggled for awhile until we looked up your video. Thanks to your concise and easy to follow instructions we completed the task in less than five minutes. THANK YOU
GREAT JOB OF SHOWING US HOW TO REPLACE THE SPRAYER WITHOUT TURNING THE WATER OFF. THANK YOU
Refreshing to see an honest repairman that uses the new assembly parts instead of reusing the used ones. I've been plagued with the tasks of replacing aged crumbling mounting nuts, leaky washers, and a cracked hose guide as they fail one by one since I paid the plumber to replace the faucet and sprayer 2 years ago. Thanks for the lesson!
Thank you Bill, I rent and I wanted to replace my mozle because it was broke. I didn't want the landlord to have to pay for a repair man. If it wasn't for you showing the hidden clip I would have never got it done. I had looked and looked and you are the only one that showed the hidden clip. Thank you so much.
This was so helpful I was having a heck of a time figuring out how to get the bottom part off my sprayer hose. Watching you experience the exact same thing and how to do it without destroying my hose! Thanks so much for your video!!!
Thanks for the video, Bill! I had everything except for how to get that little retention ring back on there. Watching you use the pliers to squeeze it into place was a big help.
thank you Bill!...l I went to many other sights to see how to take off the end where the ring was holding it together and you were the only one that showed me how to take it off easy but needed to know to replace it..
You have given us a great service, by showing the actual issues that arise upon deassembly. Others have it "pre-done" so all goes smoothly. Most of us, hit the problems such as your ring issue, and that stalls us. You have my sincere respect for being helpful, not perfect.
Thank you so so so much, Bill. After watching your vedio showing how to replace the sprayer head by removing the half-circled metal clip, I was finally able to replace my leaky kitchen sprayer which had been dripping for several months.
I love these types of videos...they make life easier & do-it-yourself fix-its less stressful. Thanks Bill!
This is just what the doctor ordered! I've been going nuts with my kitchen sprayer sticking...not sticking. Glad to know they can easily be replaced ... and just how to do it to! Thanks Bill!
This was the first video that mentioned the secret clip, which was exactly what I needed to know about to replace the base mount. Thanks!
Thank you! I used your video to replace my sprayer myself and saved myself much needed funds for home repairs. I had a different model, and I did have to figure out that there was not just a metal ring, but also a rubber ring, but your video helped me understand the basic functions, and I finally figured it out.
Thanks Bill, I was able to take it apart once I saw that there was a hidden clip. It's working fine
Thanks, Bill! That little metal C-clip was totally hidden on mine. Your video showed me where it was, and how to take it off.
Thank you. :D Couldn't have figured out there was a tiny little metal piece without you!
Thanks, I watched your vid and ran out to the hardware store to buy a new sprayer. I felt confident that your instructions would help me and they did. I had a hard time getting off that tiny Ratainer Clip and getting a new one on again. The sprayer leaks a little from the silver collar but it's better than the old sprayer which quit spraying this one is not a strong spray but it's better than the old one. BTW, you saved me a lot of money too. I was looking at the Delta replacement (hose and sprayer) for $45.00 + my plumber's fee, until I saw your video and realized I could replace just the sprayer from the hardware store for $7.00.
I would never have figured out the clip without this video. Thank you!
Thank you for showing the metal clip. Couldn't find any other videos showing that step.
That was one of the more useful short videos I have watched... thank you, you saved me a ton of time and it appears this is a generic fix for probably many spray heads.
Extremely helpful! I couldn’t understand the instructions on the pack.
Thanks!!!!!!!!!!!!! 😊🌺🙌
This did the trick for me. I almost returned the part to Home Depot. Thanks Bill!!
Thank You! I successfully for the first time ever fixed my sink sprayer watching your video, YAY!!!!
Thank you so much for these tips! We couldn't have done this without you!
Thank you, sir, you saved me $50 :-) Ordered a new nozzle (but one which came with a hose attached), and with a few relevant revisions to your video, I got it on. Interestingly, the new Moen nozzle screws in half with the upper half containing the part that was causing the issue (a sticking diverter). I did not want to attach a new hose as the old one was really not old (under four years) and in a very inconvenient position above my under-the-sink dishwasher.
Hey Bill the Handyman, you are an absolute legend! Thanks for the amazing help.
God has blessed me with your video thank you!!!
I'm a HERO to the wife now.....for about 24 hours...thanks to you video. After 40 years of marriage, every brownie point counts. LOL!!!
Thank you. Your video was so helpful. Just changed mine after watching your video.
THAT CLIP! Thanks, Bill! Great video.... 39 Downvotes?! THAT, I don't understand. You get a thumbs-up from me!
Thank you. Worked perfectly. Had no idea how to do it and you made it simple.
I really liked your video, u made it look easy and simple.
Thank you! A number of other DIY videos didn't show the details, skipping the bit about the metal c ring that was preventing my sprayer hose bits from coming off, driving me mad trying to figure it out.
Big help. Made this a simple and inexpensive task.
Great video saved me time. Thanks
watching how easy you did this makes me wonder why I have had my sprayer laying in the sink for months on end...Hope I manage after watching you... Wish me luck!!
Great instructional video Bill . I'll let you know how it works out for me when I apply . Eduardo
Directions on package didn't work for me. Bill's demonstration was perfect. Took only a few minutes to change the sprayer. Thank you!!
Thanks. Got it apart and swapped out in about 5 minutes.
Thank you very much for this helpful, useful video! It's perfect, and I do appreciate your service in bothering to create and publish it. :-) (You really did do a great job.)
I like this video 'cause it shows in real time what we go through looking for The Way :o)
Thanks, Bill! Your video was perfect and so helpful!
Thank you! I would have been here all day
Thanks to Bill, this only took me 30 minutes--not a long time for a guy who takes an hour to puzzle out how change a car battery.
Thank you for taking the time, very helpful.
Thanks. I too didn't know about the whole C ring. It was taped to the new package, but I didn't see it.
Thank you!!! So helpful. I really appreciate this video.
My sprayer head is older do you have another video for older sprayer heads?
Thank you with your help I did it😍
Thanks. This saved my bacon.
My sprayer isn't the same as this. The coupling doesn't fit far enough down on the hose. So when I hook it up it works fine but if I barely tug on the hose it leaks every where. Not all hoses are the same.
Same here.
Great vid. On my way to get a new sprayer. Thanks :)
I tried to replace the handle as the trigger lever broke off I can still use it but have hold the trigger on. Went down to my local walmart bought a handle like you show washer ,clip and all but mine leaks like a sieve. Im not sure what he deal is but Im taking the new one back and may go to hardware store for some help.
Thanks Bill - I have the parts, but the diagram didn't shows where the clip goes - you did!
you didn't replace the little plug in the hose, how do you do that or do you just cut the hose? Mine is damaged.
Excellant tutorial. Thank you.
Very helpful video!
Are all sprayers universal? How do you know which sprayer to buy?
Thank you!! Love the spenders!!
I like you, Bill.
thank you for the video! I'm still trying to find a replacement head, and so far we keep getting redirected to buying an entire faucet and head set 😠. I'll be sure to keep looking for the sprayer heads! I wish I could just remove it completely sometimes, it's such a nuisance.
After I screw off the old sprayer, my sprayer hose is NOT protruding from the old sprayer and I can find NO clip. I do see something that looks like plastic prongs, like those of a diamond ring, so I can't get the old one to release! I tried to simply replace the old sprayer with the new one, but it's still leaking like crazy. IF I cut it off the hose, how will the new piece 'stick' to the hose?
Please, please help!
This helped a ton! Thank you!!! :)
I thought I was watching Tim “the Tool” man for a minute, but you came thru. Thanks Bill.
Excellent video. And no annoying music.....how can that be?!?!.
I have a sprayer that sprays (SPLASHES) water everywhere the moment I press the lever. So, I never use the sprayer. I don't know what is the reason for it (high pressure?) but the faucet's water output is so LOW that it takes forever to fill a 5-quart pasta pot. How to FIX this?
Thanks. This let me know that my replacement kit had a part that wasn't fitting right.
Thanks Bill!
Thank you bill!!
very helpful. Thanks!
Looks easy, THX for sharing.
Experiencing problem. Tap n sprayer does not cut off. Water comes out simultaneously. How to resolve?
thanks so much! every video i looked at would show how to replace the stupid hose but nothing about the sprayer >.
THANK YOU!
Shouldn’t the water stop running out of the faucet when you activate the sprayer? Me thinks you need to replace the diverter!
Your AMAZING!!!!!!!! PoPs!!!!!
Yep, I had a part go down the sink drain.
THANK YOU!!!
Thanks!
Dude, it looks like you should replace the very worn out sink too!
I came here because I couldn't find any clip and thought I was doing something wrong. Apparently the one I have is not made with a clip so now I have to return the head I bought and buy an entire set up of hose, etc.
Good Job, but a chrome sprayer would have looked alot better!!!!
Bill the Handyman should have replaced the entire sink. It looks pretty worn.
Looks like someone skipped rehearsal.
buy a new sink.
look at that thing