AATCC 106 : Test Method for Colorfastness to Water: Sea

I explain about this test:--
1. Test Solution : Per liter:
Sodium chloride (NaCl) 30 g , Magnesium chloride (MgCl2) anhyd 5 g
Distilled water to make 1000 mL solution
2. Test Specimens
Specimen size 6 × 6 ± 0.2 cm
multifiber size 5 × 5 ± 0.2 cm
Immerse the test specimen in the
3. Test solution at room temperature with occasional agitation to ensure thorough wetting out (approximately 15 min generally required for average fabrics)
4. Remove the test specimen from the test solution and only pass between squeeze rolls (wringer) to remove excess liquor when the wet weight of the test specimen is more than 3 times its dry weight. Whenever possible, the wet weight should be 2.5-3.0 times the dry weight.
5. Place the test specimen between glass or plastic plates and insert in the
specimen unit of the perspiration tester. Adjust the perspiration tester to produce a pressure of 4.5 kg (10.0 lb) on the test specimen (see 12.2).
8.4 Heat the loaded specimen unit in an oven at 38 ± 1°C (100 ± 2°F) for 18 h. 8.5 Remove the tester from the oven and for each test specimen assembly, separate the multifiber fabric and, if used, the adjacent fabric from the test fabric. Place the multifiber fabric and test fabric specimens separately on a wire screen in a conditioned atmosphere 21 ± 2°C (70 ± 4°F) and 65 ± 5% relative humidity overnight.
NOTE ::--
My friends if there is any mistake please tell me or comment
if you have any question about this test so please you can ask me.
My email id
[e-mail]
BELOW PROVIDED LINK OTHER TEST
ISO 105 X12 Color Fastness to Crocking/Rubbing
• ISO 105 X12 Color Fast...
16 CFR 1500 51 (F)
• BUTTON ATTACHMENT 16 C...
ASTM D7506 Pocket Strength/Pocket Reinforcement
• ASTM D7506 Pocket Stre...
ASTM D1683 Fabric Seam Slippage/Strength Testing
• ASTM D1683 Fabric Seam...
AATCC 61 Method 2 Colorfastness to Laundering
• AATCC 61 Method 2 Colo...
pH ISO 3071 Determination of pH of Aqueous Extract
• pH ISO 3071 Determinat...
SEAM ASTM D1683 - Seam Strength Testing (FOR GARMENT)
• SEAM ASTM D1683 - Seam...
BURSTING STRENGTH ASTM D3786 (Mullen Bursting Test)
• BURSTING STRENGTH ASTM...
Colour Fastness to Water test ISO 105-E01
• Colour Fastness to Wat...
FABRIC WEIGHT ASTM D3776 Option -C (GSM)
• FABRIC WEIGHT ASTM D37...
PILLING TEST ASTM D3512
• PILLING TEST ASTM D3512
Tensile Strength ASTM D5034
• Tensile Strength ASTM ...
ASTM D2261 Tongue Tearing Strength of Fabrics
• ASTM D2261 Tongue Tear...
I AM REQUESTING MY ALL FRIENDS PLEASE SHARE , COMMENT AND SUBSCRIBE MY CHANNEL
PLEASE SUPPORT ME

[@enessarsoy1942]

what are the dimensions of the plates for this test ?