@@7gshark it landed upside down on concrete. There are scratches there. Maybe you can’t see them unless you get up close, but it’s scratched. But go ahead and put blue tape to protect your other 3 rims. Btw, find a new videographer
Do not remove the center caps from the front! Remove the wheel skins completely and pop the caps off from the underside. Much easier! You will also scratch the caps and possibly the skins.
I removed my old skins yesterday and DID NOT remove the center dust caps. All I did was to remove the skins and turn them upside down and pop the center caps right off. When you try to pop the caps off like this video shows, you will scratch the living hell out of the caps and possibly the skins!
Saw him get some tape to pop off the center cap (or center piece as he calls it), aww good man, he's a pro! Then see how he puts the tape and gets a screw driver... 🤦🤦🤦😒 What a n00b!! And he scratches it too 🤦 Pro tip: use the tape to actually pop off the center cap! Duct tape works better as it grips better. Cut 10" of duct tape, tape half the center cap with one end of duct tape, fold the duct tape in two as to have a handle, tape the other end onto the center cap. Then in a quick motion yank on the duct tape pulling the center cap clean off the wheel. Thumbs up of you did this 😉
@@bmac7039 are those OEM factory rims? or after market. The suppliers typically only make them for OEM. I looked and I didn't see and for 20" as well You could try to powder coat for like $400 or so.
These just fit that way. If I didn’t it would have been too proud in the middle. But you are right I had a 4 runner where I didn’t need to remove the center cap, so it most depend on the manufacturer
So you dont need to remove lug nuts? Just the center cap? I hust ordered some. Didnt think they just popped on but i hope they stay on and don't pop off.
Thank you for the video! Any suggestions on how to keep them clean. I just purchased some for a Malibu. I’m not sure what type of cleaner to use to keep them shiny.
I just use car wash soap, it's not hard to keep them clean. My only issue is they are very BRITTLE, so if you live in a cold area use caution, they can crack if you roll up on a curb or something.
Quick question. I got some wheel covers for my Camry off eBay. I just put them on without removing the little Toyota logo on the wheel before installing them. I didn't know until after I installed them and then I went to throw the box away and the instructions fell out instructing to remove the logo before installing them. Does it make a difference functionality wise? Am I safe or do I need to take the covers off, remove the Toyota emblem on each wheel, and reinstall the covers? Edit: I've driven a little around town with my wheel covers. No issues. But idk if I should/need to have that emblem placed on the wheel covers or if I should be fine/safe as is. The emblem cap is still on the actual wheel though. It's just not on top of the covers so I'm not sure if it really matters one way or another.
Well on mine the center caps kind of snapped in. I think you are ok though I had a 4 runner with no center caps. The only issue you might have is if the center caps make your skins sit proud of rims ( kind of bending it)
@@LebronJames-if6qg my old 20” chrome wheels aged badly but would cost thousands to change but with wheel skins new wheels are just a couple hundred! A much better idea! Have them on my 2021 4X4 Ram crew cab and everyone loves them!
@@NOTQUITLIKEKK I don’t own one, I did one for the Honda hrv. Check amazon or eBay for the trax parts, it’s an older model so they typically seek them for $80. Good luck
So far so good after 9,000 miles. I also had them on my 4runner and had no issues. But if you live in a cold state they can get brittle and crack if you hit a curb or something
kind of, there not really hub caps since they go over a nice wheel, not a crappy steel one. I think you'd be suprised how many dealers are using them to "tweek" the look of some of their cars.
I like how the wife was cheering him on the entire time and he was like, “Stop it” 😂 😂
I found the entire video very informative and entertaining 😂❤😂
That’s so funny
Love the way he protected the rim with blue tape and then dropped the center cap upside down on the concrete to get all scratched up
All scratched up??? I don’t think so, please watch again
@@7gshark it landed upside down on concrete. There are scratches there. Maybe you can’t see them unless you get up close, but it’s scratched. But go ahead and put blue tape to protect your other 3 rims. Btw, find a new videographer
@@Red_Dragon_46 ok
Thanks for sharing. I liked them so much that I ordered them and the black center caps for my Equinox.
Do not remove the center caps from the front! Remove the wheel skins completely and pop the caps off from the underside. Much easier! You will also scratch the caps and possibly the skins.
@@RobertBarone-n3w good call thanks for the additional tips
Awesome video looks like you had some good help in the back ground!!
Thanks we had a good laugh watching it after we posted. 8 year old camera crew works cheap - Oreos lol
@@7gsharkfor 8 years old she did a good job
You guys are hilarious
If you are replying to 1:36 we couldn't stop laughing either...
I removed my old skins yesterday and DID NOT remove the center dust caps. All I did was to remove the skins and turn them upside down and pop the center caps right off. When you try to pop the caps off like this video shows, you will scratch the living hell out of the caps and possibly the skins!
@@RobertBarone-n3w good advice thanks
This was a cool video, it made me feel like anyone can do it. Who’s the camera person, too cute
I didn't know this was s thing thanks my guy
Yes they are used by dealers to make cars look different too. They are the gourmet of the hub cap world
Saw him get some tape to pop off the center cap (or center piece as he calls it), aww good man, he's a pro!
Then see how he puts the tape and gets a screw driver... 🤦🤦🤦😒 What a n00b!! And he scratches it too 🤦
Pro tip: use the tape to actually pop off the center cap! Duct tape works better as it grips better. Cut 10" of duct tape, tape half the center cap with one end of duct tape, fold the duct tape in two as to have a handle, tape the other end onto the center cap. Then in a quick motion yank on the duct tape pulling the center cap clean off the wheel.
Thumbs up of you did this 😉
Can I like and dislike your comment?? Not sure just tape would work that cap was on crazy tight. Will try next time. Thanks for the comment
No offense but I also tried to get these off and no way just tape will pull them off
This is exactly what I was looking for, my 2018 equinox. Where did you get these wheel skins from? Great camera man btw
Amazon or eBay
Nice video, love the black
Camera man seems to be struggling
Then, after they’ve been removed a few times, they start rattling. But, they’re cheep, inexpensive to replace.
@@gjalabaster6726 yep you are correct
Love this video so real
Thank you sir🤙🏼
Great video thanks for sharing
Any skins for 2016 jeep grand cherokee limited????
There’s a high probability, check Amazon or eBay
@@7gshark i checked man.. nothing for 20x9
@@bmac7039 are those OEM factory rims? or after market. The suppliers typically only make them for OEM. I looked and I didn't see and for 20" as well
You could try to powder coat for like $400 or so.
@@7gsharkmine are OEM. But yeah I found nothing for mine lol
@@BlackKokane706 did you check eBay
Can you give us a walk around of them
Any reason you have to take out the center caps before pressing them on? I did this previously without taking them off and they held fine..
These just fit that way. If I didn’t it would have been too proud in the middle. But you are right I had a 4 runner where I didn’t need to remove the center cap, so it most depend on the manufacturer
Can you post an affiliate link for these please. Picking a set up asap. I found them on Amazon, but wouldn't mind kicking back a little support!
Best bet is to check eBay
So you dont need to remove lug nuts? Just the center cap? I hust ordered some. Didnt think they just popped on but i hope they stay on and don't pop off.
Correct on the lug nuts. They snap in really tight
Where did you get these and how much are they?
The link please and what size are those wheel skins?
Thank you for the video! Any suggestions on how to keep them clean. I just purchased some for a Malibu. I’m not sure what type of cleaner to use to keep them shiny.
I just use car wash soap, it's not hard to keep them clean. My only issue is they are very BRITTLE, so if you live in a cold area use caution, they can crack if you roll up on a curb or something.
How do you remove them
You basically have to gently pry them off without breaking the tabs. I’ve done it before but it takes a few minutes
Can you put them without factory wheel
It would be very difficult since most places only sell to oem design
Quick question. I got some wheel covers for my Camry off eBay. I just put them on without removing the little Toyota logo on the wheel before installing them. I didn't know until after I installed them and then I went to throw the box away and the instructions fell out instructing to remove the logo before installing them. Does it make a difference functionality wise? Am I safe or do I need to take the covers off, remove the Toyota emblem on each wheel, and reinstall the covers?
Edit: I've driven a little around town with my wheel covers. No issues. But idk if I should/need to have that emblem placed on the wheel covers or if I should be fine/safe as is. The emblem cap is still on the actual wheel though. It's just not on top of the covers so I'm not sure if it really matters one way or another.
Well on mine the center caps kind of snapped in. I think you are ok though I had a 4 runner with no center caps. The only issue you might have is if the center caps make your skins sit proud of rims ( kind of bending it)
Are you serious? Its just a cap. Did you think the car would blow up if you didn’t swap them over?
@@MrRahimhosein do your research it’s not a hub cab
Great video....What is the brand name on Amazon and how much were they?
I actually got them off EBAY, just search wheel skins for 2020 equinox. I mean it has to be an exact match.
@@7gshark Thank you
How bad is brake dust buildup
For mine it was basically normal. There is plenty of breathing room.
Wow, they renamed “hub caps”
Kind of but these are more upscale.
Hub Caps are a universal fit for all wheels, these are customized to fit each unique wheel
@@LebronJames-if6qg my old 20” chrome wheels aged badly but would cost thousands to change but with wheel skins new wheels are just a couple hundred! A much better idea! Have them on my 2021 4X4 Ram crew cab and everyone loves them!
@@7gshark i got the wrong skin to a Ford Explorer what can I do?
@@moneychasing4088 it won’t work, they are exact fits. Try to return it or resale on FB or ebay.
Thanks!
What about rust? Do the wheel skins trap moisture in the long run?
Good question. The only issue I heard of was small rocks getting in there and making noise when they rattle around
I had got the wrong skin put right size what can I do
Return
Popped it off, scratched it a bit but its all good!
After it was snapped into place, did you have play in it at all?
There was absolutely zero play. It fits super tight
@@7gshark thank you. What brand did you use? Coast to coast imposters?
Where you buy it ?
This was off Amazon
Could you post the link to these skins? I have a 2021 equinox and I have the same style rims
I got these from eBay
Can u do it for a 2015 Chevrolet trax
@@NOTQUITLIKEKK I don’t own one, I did one for the Honda hrv. Check amazon or eBay for the trax parts, it’s an older model so they typically seek them for $80. Good luck
Hey where did you buy these at? Thanks in advance.
It’s been a while but you’re best bet is to check eBay. Just make sure you get the right one for your wheels
and these won't go flying off at speed...over time...?
So far so good after 9,000 miles. I also had them on my 4runner and had no issues. But if you live in a cold state they can get brittle and crack if you hit a curb or something
it's almost impossible to pry them off without braking the tabs,
Where'd you get those?
I got mine from Amazon
Do you have a link for 2013 equinox? Thank you in advance!!
The best chance is to check amazon or eBay
Where did you get them from?
Check eBay and Amazon I think they are going for around $80 right now, just make sure it’s an exact match
Hub caps 😂
Lol
What company?
@@gjalabaster6726 Pacifica, but they are all about the same. Check eBay and Amazon
holy shit, they re invented a hub cap!
kind of, there not really hub caps since they go over a nice wheel, not a crappy steel one. I think you'd be suprised how many dealers are using them to "tweek" the look of some of their cars.
😂😂😂