Introduction To ANSYS (Part3) : Starting the Mechanical Interface
HTML-код
- Опубликовано: 23 авг 2019
- softwareANSYS is a set of analytical tools that use the finite element method for modeling and analysis. The finite element method has been devised to solve complex problems with geometry, type of materials, and arbitrary loading. In this way, the complex models are first divided into smaller soluble components and then by combining the results obtained from the solution of each component together the whole model response is obtained at each point. The superiority of analyzing various issues on one hand and the upgrading of computer equipment on the other hand has led to the application of finite element method and consequently software based on it. The tools provided in ANSYS enable the analysis of various types of structures such as frames, tanks, dams, bridges ... and structural components such as steel joints, steel or concrete members, insulators, ... in various ways. These include static analysis, reciprocal loading, modal, time history, spectral, and so on. To simulate different reliance conditions sometimes several options are available as acceleration, displacement, force or anchor with different patterns that are constant or variable over time. Different behavioral models of brittle and aggregate materials such as dual- and multi-linear models of steel, the Drager-Prager model and the concrete fracture model have been predicted to be used in the field of nonlinear behavior.
1:10 edit model (toolbar)
1:31 solve processing setting
6:20 assign material
8:40 connections explanation
9:49 contact type
11:40 manually create contact region
16:13 Mesh
18:30 Mesh-method
21:20 Mesh-sizing
24:00 Static structure-analysis setting
25:00 insert fixed support
26:10 insert bearing load
27:10 add bolt pretention
28:50 solve tree models
I'm loving watch these classes. The best ansys tutorial I saw. I'm learning a lot.
Thank you :)
Most accurate tutorial video I have ever seen, keep up the good work. Now I am able to utilize most most features.
Amazing and outstanding.
Amazing !!! Thank You !!
Thank you. this is the best ANSYS TUTORIAL on youtube. I hope you'll do a transient thermal analysis video
Very nice tutorial, THX...
Thanks Bro,I am learning a lot.
Quality content
Great
Bro how can people connect with you. Your work is impressive.Have aa great day
thanks for the video, but my programm gives me some errors
1 - when i applied the mesh to the lifting lug to 5 mm, graphicaly nothing changed, also on the bolts mesh to 2 mm
2 - when solving a message pops up with "general error" and one other "the pretension load could not be applied. make sure the load was not applied on a hole "
i followed evrything step by step, also did it twice but nothing changed.
someone have a solution to this?
After clicking solve, I'm getting "mesher failed to generate mesh with acceptable quality". Please help me out. Thank you.
I am not able to assign material because the details pane is not visible in Ansys Mechanical. please help
I got an error on 28:50 solve tree models saying *An unknown error occurred during solution. Check the Solver Output on the Solution Information object for possible causes.*
Try this alter Solver settings to max cores=2 and uncheck Distributed.
Even me too
Please help me out??
I did the same steps but an error has occured which is saying , check the solver output on the solution. What should I do??
Happened to me. Did you find a solution?
Same here! Is there any solution?
Try this, alter Solver settings to max cores=2 and uncheck Distributed.
i have made this far and in the end when i clicked solve button it says invalid geometry.its my D2 learning ANSYS. lol