If there only was a tool that makes the drilling process easier, safer and more accurate. I think I might invent one...I shall call it THE DRILL PRESS!
I love how gingium starts a task and then finishes it. Like a lot of other RUclipsrs have like 30 projects and do something on one every other video. This is so much better
Just recently saw ur channel and subscribed. Binge watched the drift truck. Adventure bus and lifted Miata. In the past 3 days. Definitely keeps my interest
Ty guys, I’ve followed you for a while and I have a 86 FC that I’m putting a Ford 9” triangulated 4 link in and your attention to detail and how you articulate your words are amazing I’m going to post videos soon. ty so much,seriously I needed this video today 👍💯
By far the best car guy on RUclips. He doesn't complain. He does spectacular videos. Takes a lot of B role. He is slowly moving forward and always trying new stuff. Wish I could give him a raise. Fabium rules.
I’m so glad you didn’t sell the truck all the work that has gone into it is so worth it. I have loved every video since you got it back. Keep up the amazing work @gingium I love it
Congrats on every facet of your career Caleb. Think about how far you have come from just a few years ago until now. A lot of us us have been along with you this journey from not knowing how to do the simplest modifications to cars to doing the kind of stuff that you are doing now. You truly have been a huge influence in motivating me to do more than I thought I could. I'm certain that's trust for a few more people than just me. Keep growing and keep moving. We will be here to support you.
its crazy how far you've come man, i remember i used to watch you doin basic stuff in your garage and now u have your own shop doin all types of things i couldn't even imagine if doin man, dude congrats
I noticed when you messed up on the reinforcement bars that you put them straight, if you made them slanted making a shape of a triangle they’d be stronger correct? Something to suggest
Actually most of the force through that bar would be vertical from the coilovers and a horizontal bar at any angle is going to have the same minimal effectiveness.
@@xxRyanxx414 Triangles are great because they are strong in any direction on their 2D plane. In this case however the principle force does not like up with the 2D plane of the triangle. If you have a triangle sitting on the floor with the point up at the sky and you push it perpendicular to its 2D plane it will fall as easy as any other 2D shape, say a rectangle.
Iv been watching ging since the gaming days and to see the progression of his youtube career and the progression of the cars is just so satisfying. Seriously great work ging. Keep it up!
I'm actually really impressed with how far fabium has come along . I work in a manufacturing facility as a welder /fabricator and I've been watching since you first started doing fabrication and it's gotten sooooooooooo much better
For future reference, you can bleed by yourself without needing power bleeder. You just need something like a Gatorade bottle and some tubing that fits snugly over the bleeder. Fill the bottle ~1/3 full of water or some other liquid and put the tubing in the bottle so it's fully submerged. Then, hook up the other side of the tubing to the bleeder and attach the bottle to some point on the car. You just need to make sure that the high point of the tubing is higher than the bleeder and the bottle is lower than the bleeder. Crack open the bleeder, make sure the reservoir is full, and go for it. I usually go 10-20 pumps before checking and refilling the reservoir, and go until the brake fluid coming out is clean (per the norm). At least in my experience, this is faster than having a friend help me and it gets great results.
that bench vice mounted is still a joy to see... hum... good work on the truck Gingium! except the body panels, I dont' know what is not build by your hand... you cand really say "It's MY truck!"
I was going to ask you if you need to do some lateral flanges for the shocks..... but then you mentioned at about 10:10 in the video. I'm glade to hear you are thinking about how your going to stress your chassis in the lateral direction and adding structure to the suspension to deal with those issues! I would maybe added some flanges at the top of the strut mouth too, but that probably is not really that much in danger of bending now that the rest of the suspension is supported.. Great project so far!
strongly recommend getting a self bleeder its great for bleeding brakes with a vacuum it also checks for vacuum leaks on any hoses. can even check for cylinder leaks
Just a recommendation. Idk how your truck feels obviously but if you have rear end grip problem, like to much wheel hop or it bounces in corners make an area too add weight. I use to drift my Colorado and it did great with sandbags
I found a b2300 the other day had the idea to sr20 swap, but then I found your channel and have been binge watching since, did you eyeball everything, it looks amazing in the newest video
Caleb. I’m local to you and have a full stand alone fuel system with a 15 gallon tank and a swirl pot just begging to be put in the drift truck
get this to top comment
Michal Steczek email him
Michal Steczek what gingiums name is caleb?
@@boymcfacto5832 yes
@@boymcfacto5832 it's his real name
If there only was a tool that makes the drilling process easier, safer and more accurate. I think I might invent one...I shall call it THE DRILL PRESS!
Listen he finally mounted his bench vice, one step at a time 😂
@@Iamdesignproducts yeah, hes making baby steps LOL
Caleb's not right in the head, he likes to struggle as much as possible.
@@hogdog567 or he doesn't have deep pockets like some other car channels
Ruben Braekman he bought a post lift before he bought a vice.
Gotta do a burnout before the bed goes on. that'd be SICK. Great work. Can't wait to see more!
next vid:
custom pushrod suspension for the drift truck
Some day in the distant future: installing our new custom leaf spring suspension in the drift truck!😂
I love how gingium starts a task and then finishes it. Like a lot of other RUclipsrs have like 30 projects and do something on one every other video. This is so much better
"Well, it's 1 AM, I guess I'll go to sleep"
*RUclips notification*
"Guess I was wrong"
7:00 AMERICA XD
What time zone are you in 😂
Central europe (GMT +1)
(italy)
77777Carlo me to
Cardboard is great for fabrication. Its know as CAD, not (Computer Added Design), this version is (Cardboard Added Design)
Rc Crossfire Studios aided*
@bad obsession motorsport
i think the A is Assisted... but idk
@@slammensam4068 aided. Computer aided design
well i thought it was computer animated design. but i only took one class in freshman year and still apply the knowledge
The suport cut transition at 13:35 was pretty nice. A+ editing
Nah thats just magicium
Just recently saw ur channel and subscribed. Binge watched the drift truck. Adventure bus and lifted Miata. In the past 3 days. Definitely keeps my interest
IN 3 DAYS??? Damn bro
AtOmIc NeRd 3days well spent 😂😂🤘
now get ready for the waits while he creates his masterpieces 😎
Nice bro!
Ty guys, I’ve followed you for a while and I have a 86 FC that I’m putting a Ford 9” triangulated 4 link in and your attention to detail and how you articulate your words are amazing I’m going to post videos soon. ty so much,seriously I needed this video today 👍💯
By far the best car guy on RUclips. He doesn't complain. He does spectacular videos. Takes a lot of B role. He is slowly moving forward and always trying new stuff. Wish I could give him a raise. Fabium rules.
I've been here since you first bought Mollie. Wow things have changed 😂
I’m so glad you didn’t sell the truck all the work that has gone into it is so worth it. I have loved every video since you got it back. Keep up the amazing work @gingium I love it
Congrats on every facet of your career Caleb. Think about how far you have come from just a few years ago until now. A lot of us us have been along with you this journey from not knowing how to do the simplest modifications to cars to doing the kind of stuff that you are doing now. You truly have been a huge influence in motivating me to do more than I thought I could. I'm certain that's trust for a few more people than just me. Keep growing and keep moving. We will be here to support you.
The shots of the flow meter in the foreground are sick
its crazy how far you've come man, i remember i used to watch you doin basic stuff in your garage and now u have your own shop doin all types of things i couldn't even imagine if doin man, dude congrats
I get soooo hyped every time a drift truck is up! Keep up the awesome work gingium
All of this custom fabrication work is incredible to watch. I love the ingenuity in this video.
I watched the full build video & didn't realize how much work actually went into the 4-link setup. Nice work dude.
I noticed when you messed up on the reinforcement bars that you put them straight, if you made them slanted making a shape of a triangle they’d be stronger correct? Something to suggest
Actually most of the force through that bar would be vertical from the coilovers and a horizontal bar at any angle is going to have the same minimal effectiveness.
Dani over Okay interesting! I know people with cages mostly do triangles anywhere they can but i wasn’t sure if it was the same concept for his sake
@@xxRyanxx414 Triangles are great because they are strong in any direction on their 2D plane. In this case however the principle force does not like up with the 2D plane of the triangle. If you have a triangle sitting on the floor with the point up at the sky and you push it perpendicular to its 2D plane it will fall as easy as any other 2D shape, say a rectangle.
Dani over That makes a lot of sense. Learn something new everyday
13:32 that transition was sick
That rear-facing camera view of the suspension is really cool!
That rear view is really cool
Iv been watching ging since the gaming days and to see the progression of his youtube career and the progression of the cars is just so satisfying. Seriously great work ging. Keep it up!
I'm actually really impressed with how far fabium has come along . I work in a manufacturing facility as a welder /fabricator and I've been watching since you first started doing fabrication and it's gotten sooooooooooo much better
That really means alot man :) I cant wait to keep learning and get better!
For future reference, you can bleed by yourself without needing power bleeder. You just need something like a Gatorade bottle and some tubing that fits snugly over the bleeder. Fill the bottle ~1/3 full of water or some other liquid and put the tubing in the bottle so it's fully submerged. Then, hook up the other side of the tubing to the bleeder and attach the bottle to some point on the car. You just need to make sure that the high point of the tubing is higher than the bleeder and the bottle is lower than the bleeder. Crack open the bleeder, make sure the reservoir is full, and go for it. I usually go 10-20 pumps before checking and refilling the reservoir, and go until the brake fluid coming out is clean (per the norm). At least in my experience, this is faster than having a friend help me and it gets great results.
Oh man I love watching your videos because you get work done the best and you can and you do it all yourself
I love your videos keep up the great work ❤️
There is just something so satisfying about a clean breadline job
If you where the only automotive you tuber left. I wouldn’t be mad about that!
Loved the rear camera shots man. Looks awesome!
13:33 very slick editing 👍
Dimple-died speed holes in your gussets would look awesome, add strength, and lighten some metal you throw at it. Great otherwise.
This channel has grown epically in content.
this mans video production is on point he should get way more views🤷🏽♂️
Ahahaha great comedy in this one bud , the office plug followed by TAPPS got me good
I know I'm super late to this party but the 4 link and coil overs on this build look great. Nice work!
This thing sounds so nice...
13:35
LOVE this transition.
That suspension flexing is r/oddlysatisfying worth
Really impressed with the work man. I can really tell you’re getting better at welding!
So proud of Fabium man
I like how you left in the stutter/word jumble at 0:50 hahaha
Gave me a laugh and shows your not afraid of doing that.
Keep up the good work man
Thanks man :)
I like that rear window camera mount for when you drive/rip it
Fabius out here reinforcing the truck more than his life😂
So satisfying to see it working! Amazing job dude!
Just earned yourself a new subscriber from Canada bro...nice work🇨🇦🤘
It looks so much cooler without the bed.
Dude this is cool, you have come a long way :D
Damn, that rear go pro was perfectly set up for checking for wheel hop 😈
Congrats that 4 link suspension its so cool nice video and have fun on the drift event.
Looks great.. Love a change of pace.
Looking good! Looks plenty strong. Looks neat without the box actually.
Bling bling suspension!👍 looks bad ass
DRIFTIUM IS BACK BABY
Finally another video! I'm so happy
that bench vice mounted is still a joy to see... hum... good work on the truck Gingium! except the body panels, I dont' know what is not build by your hand... you cand really say "It's MY truck!"
I was going to ask you if you need to do some lateral flanges for the shocks..... but then you mentioned at about 10:10 in the video. I'm glade to hear you are thinking about how your going to stress your chassis in the lateral direction and adding structure to the suspension to deal with those issues! I would maybe added some flanges at the top of the strut mouth too, but that probably is not really that much in danger of bending now that the rest of the suspension is supported.. Great project so far!
O' joyous day, got my first car AND Gingium uploaded!
What car is it
@@temio.463 1992 Audi 100 quattro 2.3E, pretty much my dream car haha.
I want to see you take on the bus stuff next! Love all your content Ging❤️
That's coming soon!
Nice work G. Love the sound of the v8. Honestly sounds like an early mustang 289/302.
strongly recommend getting a self bleeder its great for bleeding brakes with a vacuum it also checks for vacuum leaks on any hoses. can even check for cylinder leaks
Caleb : drink in front of the fan
Me : is that toretto?
Keep up the great work man. We all love you!
Always a good day when gingium uploads 👌🏻
Keeps getting better and better 👌
Yaaaas!
Can’t wait to see those turbo kart/ drift truck tandems. Stay positive.
Been a fan since you made forza videos and been wanting to mod my e36 more and more each video keep it up 👌🏽🔥
Been waiting for this video for 2 weeks!!
El Durooo de acá de Puerto Rico 🇵🇷 me encanta la guagua yo tuve 2 de esa ahora tengo una Toyota pick up 🆙 22r💪🏽💪🏽💪🏽Felicidades por ese proyecto
Man I remember the days when you made your brake lines out of bendy straws and hot glue and used Mountain Dew for brake fluid. 20k squad!
Keep making these long vids they are much better
loved the editing!
really impressive work man! 🙌
EASTWOOOOOOD represent PA !
Well, completely forgot about this channel and this build.... Hasn't been showing up in my recommended videos. Guess its time to binge some episodes!
Look at that vise...mounted and all!
Fabium has evolved.
13:34 Nice edit
Just a recommendation. Idk how your truck feels obviously but if you have rear end grip problem, like to much wheel hop or it bounces in corners make an area too add weight. I use to drift my Colorado and it did great with sandbags
Gingium working on cars so much he forgot that he has a mustache to attend to it is growing in faster than the builds😂
Love you Caleb, keep it up.
That transition at 13:35 though. That shits so satisfying
Man I’ve been watching you from forza gameplays. You’ve came a long way. Keep it up.
Those Instagram teasers get me anticipating this video
Good stuff homie. Love the drift truck content! Keep it up sir.
the lack of a panhard bar drove me absolutely nuts through this whole build lol
keep up the good woork .... we'll be waiting for the next vid
Close to 400k
Not 30 min ago I was on RUclips and was looking for a new vid from u haha I been waiting
Love the bedless look😍
U got some serious Skill man 💥😍
good job... well done !!! greetings from germany
You do some cool shit man, you deserve to be out there with lz, boostedboiz, motion auto, etc.
Great work man
Clicked off adams video as soon as i got the notification of the vid!!!
I found a b2300 the other day had the idea to sr20 swap, but then I found your channel and have been binge watching since, did you eyeball everything, it looks amazing in the newest video
Can't wait for you to drift again.
"I really want to rip it but I don't want to break it yet"
YET? SO YOU WANT TO EVENTUALLY BREAK IT?
Kourosh Khadjenouri yes mid-drift with a camera recording it all
I've been waiting for this day