What spring rate front/rear and preload values do you have your Kings set at? From watching you bump and rebound coming up the face, the rear hardly cycles up. In the woops it looks like it’s way too stiff. My general 4 with the same kit, I’m running 350lb rear springs with 1” of preload. I’m on 33” rt320. I have a full size spare in the bed and a full tool kit and cooler. My rear when compressed kisses the fender flare about a 1/4”. I had to bend up the tilt bed handle into the pocket so the tire did not hit. I Don’t remember where my clicker is set now. If you need that I can go check. But mine I feel like runs smooth without that bucking and swapping in the rear. I still have the factory king valving but have adjusted the adjusters. Hope that info helps.
@@OffCamberInd the kings I believe all come with 250 lbs at all four corners. I had to increase the rear as I needed more preload in the 250lbs than king was advising to run. King told me to shoot for 1”. Not sure but in an early vid I think you guys mentioned increasing the rear spring to a 400lbs but never mentioned preload.
Awesome first look, will be awesome to have two options for that kit. Especially I think Kings have a loooong lead time right now
That sucker is clean man I just bought a 23 general and when it’s time I’m looking for set ups like this
Awesome!
Let us know what questions you might have about the setup
@@OffCamberInd a parts list or links to all the parts haha
You were goin pretty fast for a General!
🚀 lol
The review was awesome but I stayed for your wife's comments lol. "Just how you like it!" Classic!
Haha, thought she roasted Royce but got Eric even better 😂😂
She’s a savage for sure
That’s it, you’re wife stays haha! Good review hopefully they will make a non long travel shock for the XP🤞🏼
Have you tried a spring kit? A friend of ours with the XP put on a Zbroz kit and really has enjoyed it
@@OffCamberInd thank you, I will look in to them, I appreciate it.
The wife on the bouncing back end had me rolling on the floor. Great job.
😂
Off,Bravo,really top uploading! catch you later~))
What spring rate front/rear and preload values do you have your Kings set at?
From watching you bump and rebound coming up the face, the rear hardly cycles up. In the woops it looks like it’s way too stiff.
My general 4 with the same kit, I’m running 350lb rear springs with 1” of preload. I’m on 33” rt320. I have a full size spare in the bed and a full tool kit and cooler. My rear when compressed kisses the fender flare about a 1/4”. I had to bend up the tilt bed handle into the pocket so the tire did not hit. I Don’t remember where my clicker is set now. If you need that I can go check. But mine I feel like runs smooth without that bucking and swapping in the rear. I still have the factory king valving but have adjusted the adjusters.
Hope that info helps.
The rates are whatever comes in their kit. We will have to check exact preload
@@OffCamberInd
the kings I believe all come with 250 lbs at all four corners. I had to increase the rear as I needed more preload in the 250lbs than king was advising to run. King told me to shoot for 1”.
Not sure but in an early vid I think you guys mentioned increasing the rear spring to a 400lbs but never mentioned preload.
Are you running stock axles or did you find some aftermarket ones that fit
Ended up putting demons on there before we sold it
@@OffCamberInd so you just used the turbo s axels on the rear for the length
Cant remember, just know we got them made by demon powersports, specially made for the HCR long travel kit we had on there
So in a nutshell the kings could use a dual rate setup!?
You should switch it up and just have the wives do a video all on their own.
😂 not a bad idea