Just recently got into home improvements after buying my first house. Picked up the dewalt miter saw 2 months ago. Then on Black Friday got the Flexvolt Hammer drill + impact driver, circ saw and the multi tool as a kit. And recently picked up the jigsaw. Dewalt is addicting.
Great set. I never had any problems with my dewalt tools. In fact I have to sell them after one years work, in order to buy new ones. They still hold there value. Just got a miter saw cordless 👍
Awesome money makers u have there! I have the 887 impact,7 1/4 brushless skilsaw,brushless oscillating tool,brushless sawzaw,brushless grinder 60v,20v jigsaw and pancake compressor. All dewalt stuff of course and all cordless except for the compressor. Love my dewalt tools!!!
Good start .. DeWalt is for framers/Carpenters/ construction...some good tools there...looks like the 777 drill and 885 impact...I'd get the 792 and 888 much better, also the 577 rear handle saw is the best, love DeWalt precision nailers I see,use silicone on the tracks and clean them...the cordless tablesaw is awesome also...if you do a lot of concrete drilling the sds plus is amazing...love the cordless compressor, the 200 psi trim compressor is awesome also... recently got the new cordless barrel grip jigsaw, orbital sander and router ....
Joe Framer I’m looking forward to the cordless router as well as the barrel grip jigsaw. You have the jigsaw already?? I haven’t seen it to buy online yet where l am. My next purchase will most likely be the flexvolt mitersaw that doesn’t slide. I’m looking for something a bit lighter to haul around
Hey buddy I will tell you the next best addition you need . The powerstation not only can you use it as a charger for 4 batteries you will automatically have a battery powered saw stop table saw . I run my Makita mitre saw and my table saw off mine on a power strip you just can't run them both at the same time . I didn't think I would get as much use from it but I absolutely wouldn't want to not have it now.nice collection also
Phillip Mccarter hey man! I do have one for the soul purpose of running my sawstop job site saw. However it want turn it on for some reason. It will light up but it flashes and want turn green. I called Sawstop but they needed my serial number and l didn’t have it at that time so I never called back. I do like the power station. We lost power with the snow and l was able to power my fridge with it. It’s alittle heavy l felt for daily charging. I found myself opting to not get it out unless l had to. So l purchased the new fast charger that does 4 at once. Much lighter and takes up alittle less space. Now the power station is just there when l need it but it is awesome when the time comes
@@toolman101476 I do alot of exterior painting and use alot of boom lifts I throw it in the bucket with me and use it to power my spray machine so it let's me be able to drive the lift around without having to go down Everytime to unplug the cord saves a ton of time . Also I take my fan with me to my kids football games and set up my canopy on hott summer days makes people jealous !!
toolman101476 the power station won’t work my Festool sys vac either. My electrician explained it to me. Something with fluctuation in voltage. I’m sure the SawStop is the same situation. I was bummed. I still use the Power Station on other applications.
Nice kit 👌 I have some of the similar tools and what you need to do is invest in some tough boxes they just came out with the tough system 2.0 that would be an excellent addition as for the miter saws I can justify having a 12 inch miter saw and a 7 1/4 but not for 5 12 inch miter sawsbut I do have to say that flexvolt miter saw is the best hands down absolutely love the one that I have when I first bought it felt like I caught a unicorn that had wings!!!😎😎😎😂😂😂😂😂
confused dot com ......no I’ve went through 3 of them so far. The longest lasted me about 8 months. Other than it burning up yes they are brilliant lol
This was a fun video to watch. . Love that you had five at one time. That's a hoot. I just got my first DeWALT drills this past week. LOVE THEM. Now hunting for saws to add to my collection. Cheers, Ivy.
interman 77 me and the flexvolt saw try to make as much time together as possible. As with anyone with multiple skillsaws jealousy is always an issue. So l take turns... some days I’ll use flexvolt to cut some 4x4s then other days I’ll use the 20 volt but when l do.....I’m always wishing l was using the flexvolt. I feel as if this did not answer your question..... So l don’t do a lot of framing. I’m a trim carpenter. So most days it’s just a couple of cuts and that’s it. As for power.... that l can speak on. I did replace the corded saw with the flexvolt. If your doing a deck a couple batteries would last most if not all day.
Eric Nichols I heard it will cut over 300 2x4s on a charge according to Dewalt ,which if true seems pretty good ,just thought I would ask someone with experience like yourself, thanks for the reply .
Tin Man l bought the power station and it charges 4 batteries at once. Is that what your talking about? Ive have heard of another charger that was just a charger for 4 batteries and not a charger/generator, but l didnt know it was out
toolman101476 » I was making a little joke - but a battery operated battery charger might be useful. I bet that cordless air compressor sucks them dry pretty quick.
Tin Man let me be honest here l havent had a Dr pepper in a full day and my mind isnt operating at 100%. As for your joke. Im alittle disappointed l didnt get it till l re read it. But to my defense when you say "hey you should get (x) dewalt tool. All joking is over. We need to find said tool immediately
I have the four battery station works great when you have a crew working and don't have to wait for batteries to charge. It keeps work goin. But that was funny a battery charger that runs on batteries. I would buy tht
Cause you know they work great. Just got a little blower works awesome. Then I order the little USB charger attachment. Last night I decided to updated a kit. So I just order a five piece set.
Man l have no idea lol. Over the years l have no doubt lve spent upwards of 20k maybe more. Right now presently probably 10k in what l have in just Dewalt. My typical set up is the flexvolt mitersaw, dewalt stand with fastcap best fence attached that. That all is right at 2000 just in the saw system.
abubeker ashref I have no idea. I’ve been buying and selling tools for over 20 years. The video was 2 years ago and since then I have a lot more and have sold some and upgraded them. What I tend to do is buy a tool, use it till a better version is available then sell it to some of my guys so they can have nicer tools. On average I’ll spend somewhere in the 5k to 10k a year on new tools.
Dewalt makes the best power tools and I love them. Dewalt does not make their tools with cords anymore and I do not go on site. I am forced to buy batteries when I don't need them, it is a racket
You can buy tool only. If you're like me I have 50+ batteries and you don't need to buy kits anymore. Just tool only is the way to go if you're vested into it like I am.
nice collection a lot of dust on them though, look like my tools I usually clean them with wd-40. I don't see screwgun or flashlights in your collection lol. I wish they would make a brighter flashlight than 160 or 110 lumens for the 20 volt, the big flood light is heavy and stupid to carry around. Their cordless vacuum is also a waste of money to buy.
Homepros NYC l collect tools and dust... l just got the new tripod worklight from Dewalt. That thing is really nice and sturdy. I care nothing about the small lights they make. As for screwguns.. l have 5 impact guns and a couple chuck drills. I've never tried to use wd40 to wipe anything down before but l will give that a shot. I dont clean clean the tools up alot just because the very next day....more dust.
I love my dewalt tools but over hear in the uk the majority of tradesmen say dewalts a load of sh_t ! Its just yellow black and decker ! Black and decker were known to be inferior quality tools back in the day! Unfortunately uneducated people still think that because dewalt are associated with b&d dewalts gonna be just as rubbish . All tool brands have good and bad tools but for me dewalts never let me down .
Rubi Kasuto lol yea l thought about cleaning all the tools before the video but that is just unrealistic and a waste of time. They’ll be dusty the next day. You can’t fight the dust..... it will win. Resistance is futile lol
Ray Fox what are talking about? You have to explain that one man. Back in the day l would agree but with these new type batteries they work great. Only thing that does last all day is the mitersaw. Have you used the flex volt yet?
Charging can be a pain. What I’ve done was buy the 4 port charger. Usually lm trimming houses and I’m there most of the day. So I’ll be swapping out batteries all day while I’m working...end of the day all my batteries are charged. Granted l have a lot of tools with a lot of batteries so it’s l can go a few days without running into a battery problem. The cost is allitte aggregating . It’s almost cheaper to just buy a tool that comes with the batteries. I just had a 60volt go bad and l feel like for the price it shouldn’t ever go bad lol...ever. It was under warranty so it’s getting replaced.
Great collection
Just recently got into home improvements after buying my first house. Picked up the dewalt miter saw 2 months ago. Then on Black Friday got the Flexvolt Hammer drill + impact driver, circ saw and the multi tool as a kit. And recently picked up the jigsaw. Dewalt is addicting.
Great set. I never had any problems with my dewalt tools. In fact I have to sell them after one years work, in order to buy new ones. They still hold there value. Just got a miter saw cordless 👍
Jon Mal love all their cordless stuff!! I’m ready for all the new tools to hit in a few months
Wow I love DEWALT looks like a candy store. Thanks for posting
Awesome money makers u have there!
I have the 887 impact,7 1/4 brushless skilsaw,brushless oscillating tool,brushless sawzaw,brushless grinder 60v,20v jigsaw and pancake compressor. All dewalt stuff of course and all cordless except for the compressor.
Love my dewalt tools!!!
Love the tools. Thought I was a mad Dewalt fan. Love your collection.
Good start .. DeWalt is for framers/Carpenters/ construction...some good tools there...looks like the 777 drill and 885 impact...I'd get the 792 and 888 much better, also the 577 rear handle saw is the best, love DeWalt precision nailers I see,use silicone on the tracks and clean them...the cordless tablesaw is awesome also...if you do a lot of concrete drilling the sds plus is amazing...love the cordless compressor, the 200 psi trim compressor is awesome also... recently got the new cordless barrel grip jigsaw, orbital sander and router ....
Joe Framer I’m looking forward to the cordless router as well as the barrel grip jigsaw. You have the jigsaw already?? I haven’t seen it to buy online yet where l am. My next purchase will most likely be the flexvolt mitersaw that doesn’t slide. I’m looking for something a bit lighter to haul around
Hey buddy I will tell you the next best addition you need . The powerstation not only can you use it as a charger for 4 batteries you will automatically have a battery powered saw stop table saw . I run my Makita mitre saw and my table saw off mine on a power strip you just can't run them both at the same time . I didn't think I would get as much use from it but I absolutely wouldn't want to not have it now.nice collection also
Phillip Mccarter hey man! I do have one for the soul purpose of running my sawstop job site saw. However it want turn it on for some reason. It will light up but it flashes and want turn green. I called Sawstop but they needed my serial number and l didn’t have it at that time so I never called back.
I do like the power station. We lost power with the snow and l was able to power my fridge with it. It’s alittle heavy l felt for daily charging. I found myself opting to not get it out unless l had to. So l purchased the new fast charger that does 4 at once. Much lighter and takes up alittle less space. Now the power station is just there when l need it but it is awesome when the time comes
@@toolman101476
I do alot of exterior painting and use alot of boom lifts I throw it in the bucket with me and use it to power my spray machine so it let's me be able to drive the lift around without having to go down Everytime to unplug the cord saves a ton of time . Also I take my fan with me to my kids football games and set up my canopy on hott summer days makes people jealous !!
toolman101476 the power station won’t work my Festool sys vac either. My electrician explained it to me. Something with fluctuation in voltage. I’m sure the SawStop is the same situation. I was bummed. I still use the Power Station on other applications.
Nice kit 👌 I have some of the similar tools and what you need to do is invest in some tough boxes they just came out with the tough system 2.0 that would be an excellent addition as for the miter saws I can justify having a 12 inch miter saw and a 7 1/4 but not for 5 12 inch miter sawsbut I do have to say that flexvolt miter saw is the best hands down absolutely love the one that I have when I first bought it felt like I caught a unicorn that had wings!!!😎😎😎😂😂😂😂😂
I've just bought the same mitre saw, they are brilliant aren't they! 🙂
confused dot com ......no I’ve went through 3 of them so far. The longest lasted me about 8 months. Other than it burning up yes they are brilliant lol
Cool set up man
I love DeWalt. Verily starting my to buy my collection, have six tools with batteries so far.
Verily? Barely?
It is a great saw! Well made and fair price!
This was a fun video to watch. .
Love that you had five at one time. That's a hoot.
I just got my first DeWALT drills this past week. LOVE THEM.
Now hunting for saws to add to my collection. Cheers, Ivy.
The Happy Whisk never stop hunting lol
Hope you have shares in dewalt...
Lol I think that I might have an addiction to buying dewalt tools too but I only use them around the house.
I drool over your collection mate. Good job.
Mr. Credo lol thanks!
Your favorite tool is also quite expensive. That’s a nice saw though!
its mad when i think back when I started out and cordless drills were hopeless
dan wolf battery stuff has come a long way in just in the last few years. Im curious what else they can do
"I used to have 5 of these" hahaha nice collection mate
Nice collection
Hey buddy ,how much run time do you get with your Flexvolt circular saw ? Thanks.
interman 77 me and the flexvolt saw try to make as much time together as possible. As with anyone with multiple skillsaws jealousy is always an issue. So l take turns... some days I’ll use flexvolt to cut some 4x4s then other days I’ll use the 20 volt but when l do.....I’m always wishing l was using the flexvolt. I feel as if this did not answer your question.....
So l don’t do a lot of framing. I’m a trim carpenter. So most days it’s just a couple of cuts and that’s it. As for power.... that l can speak on. I did replace the corded saw with the flexvolt.
If your doing a deck a couple batteries would last most if not all day.
Eric Nichols I heard it will cut over 300 2x4s on a charge according to Dewalt ,which if true seems pretty good ,just thought I would ask someone with experience like yourself, thanks for the reply .
Nice collection looks like you got stung by the yellow jacket 🐝
J J getting a yellow jacket by Dewalt is a great idea. I’m looking forward to September when a new line of tools arrives
You need to get the new DeWalt cordless battery charger to keep all them batteries pumped. Runs on DeWalt 20v batteries.
Tin Man l bought the power station and it charges 4 batteries at once. Is that what your talking about? Ive have heard of another charger that was just a charger for 4 batteries and not a charger/generator, but l didnt know it was out
toolman101476 » I was making a little joke - but a battery operated battery charger might be useful. I bet that cordless air compressor sucks them dry pretty quick.
Tin Man let me be honest here l havent had a Dr pepper in a full day and my mind isnt operating at 100%. As for your joke. Im alittle disappointed l didnt get it till l re read it.
But to my defense when you say "hey you should get (x) dewalt tool. All joking is over. We need to find said tool immediately
I have the four battery station works great when you have a crew working and don't have to wait for batteries to charge. It keeps work goin.
But that was funny a battery charger that runs on batteries. I would buy tht
Awesome, I love Dewalt too.
I am sooo addicted to dewalt. Is it the color or what ? I dont know.
oduncu kız the color doesn’t hurt it for sure. There like eating chips...... you can’t stop at just one
Me too, must be the color combination and of course, the quality.
In my country everyone has makita, so its easy for me to spot my own tools on the jobsite. :D
I think it’s the colour reminds me of power rangers
Cause you know they work great. Just got a little blower works awesome. Then I order the little USB charger attachment. Last night I decided to updated a kit. So I just order a five piece set.
Awesome tools. How much do you reckon you spent all up?
Man l have no idea lol. Over the years l have no doubt lve spent upwards of 20k maybe more. Right now presently probably 10k in what l have in just Dewalt. My typical set up is the flexvolt mitersaw, dewalt stand with fastcap best fence attached that. That all is right at 2000 just in the saw system.
how much did you spent for this all
abubeker ashref I have no idea. I’ve been buying and selling tools for over 20 years. The video was 2 years ago and since then I have a lot more and have sold some and upgraded them. What I tend to do is buy a tool, use it till a better version is available then sell it to some of my guys so they can have nicer tools.
On average I’ll spend somewhere in the 5k to 10k a year on new tools.
Wao you had a yellow feber?
Carlos Gamaliel Contreras Aguilar yes...... l did lol
toolman101476 i just started with the yellow feber jejejej
Holy cow you have a freaking Arsenal 👍🏼👍🏼good collection tho
Dewalt makes the best power tools and I love them. Dewalt does not make their tools with cords anymore and I do not go on site. I am forced to buy batteries when I don't need them, it is a racket
You can buy tool only. If you're like me I have 50+ batteries and you don't need to buy kits anymore. Just tool only is the way to go if you're vested into it like I am.
Just buy the Body only...Christ its not difficult.
nice collection a lot of dust on them though, look like my tools I usually clean them with wd-40. I don't see screwgun or flashlights in your collection lol. I wish they would make a brighter flashlight than 160 or 110 lumens for the 20 volt, the big flood light is heavy and stupid to carry around. Their cordless vacuum is also a waste of money to buy.
Homepros NYC l collect tools and dust... l just got the new tripod worklight from Dewalt. That thing is really nice and sturdy. I care nothing about the small lights they make. As for screwguns.. l have 5 impact guns and a couple chuck drills.
I've never tried to use wd40 to wipe anything down before but l will give that a shot. I dont clean clean the tools up alot just because the very next day....more dust.
toolman101476 » If you've use for a spotlight he DCL044 spotlight is impressive for it's size. Best spotlight I've ever owned.
Tin Man l dont have that. I picked up the dcl079 looks like a rocket launcher and l have the old dc020
oh yeah awesome stash.
Hello Sir ! I want buy some thing in your shop brushless drill driver or crocdless impart drill .
Hey gang l appreciate all the like and comments. If there is a tool you’d like me to know more about. Let me know
DEWALT super tools, i love DEWALT
Very nice😎
dewalt are great tools. they last very long. 👍
Nice ,same as me
Morning Sun there is only room for one.....l just bought another 12" flexvolt. Let the games begin my youtubing friend lol
Dude it’s saw. Not sawl 👍🏻
I love my dewalt tools but over hear in the uk the majority of tradesmen say dewalts a load of sh_t ! Its just yellow black and decker ! Black and decker were known to be inferior quality tools back in the day! Unfortunately uneducated people still think that because dewalt are associated with b&d dewalts gonna be just as rubbish . All tool brands have good and bad tools but for me dewalts never let me down .
I want to talk to you
NIROB Hossen what’s up?
Black and yellow...!!!
No DE Walt cable strippers
Hi bro
Damn.... I'm jealous
when the truc is full there is more battery than a tesla...
to say that you have a blower, your tools are very dusty :)
Rubi Kasuto lol yea l thought about cleaning all the tools before the video but that is just unrealistic and a waste of time. They’ll be dusty the next day.
You can’t fight the dust..... it will win. Resistance is futile lol
Dewalt is a great brand but battery Power is a pain and a rip-off
Ray Fox what are talking about? You have to explain that one man. Back in the day l would agree but with these new type batteries they work great. Only thing that does last all day is the mitersaw. Have you used the flex volt yet?
Fed up of charging them and when they are done new ones cost a fortune - just a rip off
Charging can be a pain. What I’ve done was buy the 4 port charger. Usually lm trimming houses and I’m there most of the day. So I’ll be swapping out batteries all day while I’m working...end of the day all my batteries are charged. Granted l have a lot of tools with a lot of batteries so it’s l can go a few days without running into a battery problem. The cost is allitte aggregating . It’s almost cheaper to just buy a tool that comes with the batteries.
I just had a 60volt go bad and l feel like for the price it shouldn’t ever go bad lol...ever. It was under warranty so it’s getting replaced.
I strongly disagree bro
Hope you have shares in dewalt...