To protect the rubber you can use a thin layer of Shin Etsu grease. Honda has released several service bulletins and they all recommend this to protect rubber and to prevent it from squeaking / lubricate it. From my own experience CRC/WD40 silicone lubricant or maxima SC1 protectant will eventually wash off and won't last more than a year, but Shin Etsu grease will last a lot longer.
Also kindly clean the rubber boot and then spray a healthy dose of Silicone spray in order to nourish the rubber (restore and retain the elasticity) which helps to prevent the cracking of the boot.
What do you recommend to spray on it? Mine is tore up will replace before new tires amd wheel alignment since have to take tire rod off to replace im thinking of a walk around like cut down middle amd hot glue gum to seal or silicone to seal the seanm I cut but ill go the best way amd replace taking tires rod off and replace tires do balance alignment etc...
@@prtbone78 Instead try applying a thin layer of Shin Etsu grease. Honda has released several service bulletins and they all recommend this to protect rubber and to prevent it from squeaking / lubricate it. From my own experience CRC/WD40 silicone lubricant or maxima SC1 protectant will eventually wash off and won't last more than a year, but Shin Etsu grease will last a lot longer.
nice video! Is there any way if that boot stays off can it cause that area to creak? Maybe because its dry? I got a creaking noise when only when i turn from the driver side of the car
If boot is not on its location then , the lubrication will have to face water and dust from outside , which will eventually wear the rack out , so having the boot on is kind of important
After very long time....pls send a link for steering & other greasing parts of storm dicor and cleaning of sensors of it with a cleaner or... Can i use mogsol nano drop spray..it's a lubricates, penetrate, & prevent rust
@@yourDIYneeds yes I've changed the link rods last week along with the arm bushings and steering outer ends.The noise is still there. I've also watched your steering rack preload adjustment video but mine has 14mm nut instead of 19mm and it is rock hard to move it either way.
Sir one last thing is to check the brake caliper puns for play , sometimes they also make clunking noise on potholes , quite common with floting caliper design.
What if the steering used to jerk alot and not it doesn’t move at all? The steering is stuck. It used to only work in warm weather or after being warmed up. It’s electric. Does it need grease or new tie rods? I know one side is missing its boot plus there was clunking noise when the steering used to work. Now the arm won’t turn at all
Seems like the unit is seased so best is to replace it . Means you can try the wd40 way and then lubricate , but be mentally prepared to replace the rack assembly
Metal clamp is there for a reason. It must be like that because in full turn of the wheels the boot is pulled very strong, and plastic zip like in video is too wonky for the job! 70 mm dia should be OK. I had to use 90mm at hand, it got just enough adjustment. With RHD UK car, fixing left wheel, I had to remove the air filter to access with screwdriver when the wheels turned to help compress fixing the boot clamp.
Sir i completely agree , metal clamps are better as they exert more force on the rack body , but there is one more thing to remember that at the end of the rack there is a lifted lip . So if the boot is properly inserted over the rack and the zip tie is installed even with a decent amount of pressure , that boot is not going anywhere .
@@yourDIYneedsor sir stering ke u joint ko liquid grease spray se lubrication kar sakte hai ya power stering oil ko injection ki help se lubricarion kare ? Dono mei se kon sa thik rahega n
Sir that means your steering rack is leaking We have two options , either go for a new one or get the seals replaced inside the rack , for both of these work , rack will come out
Bro meri swift 2014 diesel 1lakh 10 thousand done.ab tak 1 baar bhi engine flush nhe hua hai. Kya mai ab engine flush kara sakta. hu koi prob to nhe hogi?
भाई मेरी vento के मेन centre वाले ac vents में हवा नहीं आ रही है , एयर फ़िल्टर भी नया है, blower मोटर भी मैंने साफ़ कर दी. भाई क्या प्रॉब्लम हो सकती है और कैसे दूर करें इस समस्या को. साइड वाले vents बिलकुल मस्त हवा दे रहे हैं
@@yourDIYneeds नहीं भाई vents ओपन हैं. मैंने music system, climate control panel ko nikal kar bhi dekh liya LEKIN KUZ SMJ NAHI AYA JI.....EVEN VENTS NIKAL KE BHI AIR NAHI AA RAHI MENE WASH KARNE KE LIYE NIKAL LIYE THE BHAI
@@yourDIYneeds और एक और प्रॉब्लम भी है जी गाडी में climate control ac लगा हुआ है उसके बटन दबाने से पैरों पर हवा भी नहीं जाती .. सिर्फ सामने ही आती है . जी
Sir best is to use a high temp. Grease But at the point when i was shooting the video , i did not had a high temp. Grease so i used a normal petrol based lithium grease
Alignment check... Caster is what determines in great part how well the steering returns to center... Camber as well greatly affects steering return.. worth checking... strut bearings also
Then firstly get the alignment check ( alignment consist of toe angles , camber angles and castor angles ) if they are not set correctly , then steering will not behave as it should , it will also feel numb while driving
I would suggest clean the old grease completely first before adding the new grease as 2 different greases are not supposed to be mixed unless you got the same grease as the manufacturer put in before you.
Yes sir , ideally that's the best way to do it , but the older grease had the same appearance as dried up normal petroleum grease usually have , that was the reason why i added on top of it
@yourDIYneeds bro, in my case i changed the rack as the steering felt heavy and doest auto center after turning. But after rack replacement the steering feels better but definitely not comfortable to drive in city with single hand. I still fell heavy if i had to completely turn left or right. Any suggestions please? I also changed front struts mount bushes and greased them.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
subtitles / closed captions available
I thought I was going to need a new steering rack. This video saved me $500- $700.
To protect the rubber you can use a thin layer of Shin Etsu grease. Honda has released several service bulletins and they all recommend this to protect rubber and to prevent it from squeaking / lubricate it. From my own experience CRC/WD40 silicone lubricant or maxima SC1 protectant will eventually wash off and won't last more than a year, but Shin Etsu grease will last a lot longer.
Thanks for the video.. almost replace the steering rack.. watch this video & diy, works well so far..
Also kindly clean the rubber boot and then spray a healthy dose of Silicone spray in order to nourish the rubber (restore and retain the elasticity) which helps to prevent the cracking of the boot.
Sure sir
@@yourDIYneeds Brother, I love your attitude of respecting others. Kindly address me as Larsen and not as, "Sir." Peace ;)
What do you recommend to spray on it? Mine is tore up will replace before new tires amd wheel alignment since have to take tire rod off to replace im thinking of a walk around like cut down middle amd hot glue gum to seal or silicone to seal the seanm I cut but ill go the best way amd replace taking tires rod off and replace tires do balance alignment etc...
@@prtbone78 Instead try applying a thin layer of Shin Etsu grease. Honda has released several service bulletins and they all recommend this to protect rubber and to prevent it from squeaking / lubricate it. From my own experience CRC/WD40 silicone lubricant or maxima SC1 protectant will eventually wash off and won't last more than a year, but Shin Etsu grease will last a lot longer.
@ubernihilist457 thanks for the reply ill check it out. ..
Your videos really help to get upgrated
I'm a great fan of your work
Excellent work and information.
God bless you.
nice video! Is there any way if that boot stays off can it cause that area to creak? Maybe because its dry? I got a creaking noise when only when i turn from the driver side of the car
If boot is not on its location then , the lubrication will have to face water and dust from outside , which will eventually wear the rack out , so having the boot on is kind of important
After very long time....pls send a link for steering & other greasing parts of storm dicor and cleaning of sensors of it with a cleaner or... Can i use mogsol nano drop spray..it's a lubricates, penetrate, & prevent rust
Good advice for the zip tie, worked perfectly 😄
Great video. Can i use wheel hub/bearing grease?
Can I get a piece of advice on clunking noise over bumps?
Sir , Have you checked the link rods ( stabilizer ) ?
@@yourDIYneeds yes I've changed the link rods last week along with the arm bushings and steering outer ends.The noise is still there. I've also watched your steering rack preload adjustment video but mine has 14mm nut instead of 19mm and it is rock hard to move it either way.
Sir one last thing is to check the brake caliper puns for play , sometimes they also make clunking noise on potholes , quite common with floting caliper design.
@@yourDIYneeds I've also checked and changed it by watching your video sir.
From which side the noise is from ?
I am your new subscriber
Great video, thanks so much for sharing!
Great video Sir.Thank you for sharing.
Oh my god thank you soo much sir.
🙏🙏🙏🙏🙏
Excellent video very well made no bs stuff to the point is this same for Toyota ?
Yes sir , not just for toyota , for every car which have a rack and pinion gear set-up
Bhaiya outer aur inner tie rod RANE company ke kaise hai ? Please replay
Sir decent quality
@@yourDIYneeds thankyou bhaiya 🙏
What kind of grease do I ask/search for?
Sir lithium grease
What if the steering used to jerk alot and not it doesn’t move at all? The steering is stuck. It used to only work in warm weather or after being warmed up. It’s electric. Does it need grease or new tie rods? I know one side is missing its boot plus there was clunking noise when the steering used to work. Now the arm won’t turn at all
Seems like the unit is seased so best is to replace it .
Means you can try the wd40 way and then lubricate , but be mentally prepared to replace the rack assembly
Helped a lot thanks
what kind of the grease should I use on the rack gear? Any brand recommendations? Thanks
Sir any decent brand , just remember high temp grease, due to the proximity of rack to exhaust
Excellent video, was this rack making any clicking noise when turning steering wheel when parked only?
No sir , no noise was present
Sounds more like a steering driveshaft issue...old worn out u joints.
No sir , have a look at previous videos , complete suspension was done
@@yourDIYneeds Wasn't he talking about *his* car?
How long it will last for regreasing?
Sir it's been almost 2 yrs and its still going good
Since my steering is stuck right now, can I spray wd40 on it to get it moving again and then put the grease on it?
Like its completely locked ?
@ Yes
Sir my polo steering is little hard to turn will Making it solve the issue please tell me what to do?
Yes , but along with yolk adjustment
Metal clamp is there for a reason. It must be like that because in full turn of the wheels the boot is pulled very strong, and plastic zip like in video is too wonky for the job!
70 mm dia should be OK. I had to use 90mm at hand, it got just enough adjustment. With RHD UK car, fixing left wheel, I had to remove the air filter to access with screwdriver when the wheels turned to help compress fixing the boot clamp.
Sir i completely agree , metal clamps are better as they exert more force on the rack body , but there is one more thing to remember that at the end of the rack there is a lifted lip . So if the boot is properly inserted over the rack and the zip tie is installed even with a decent amount of pressure , that boot is not going anywhere .
Great
Which kind of Lubricant can i use for my car? I have an Citroen C-Elysee with Electronic Power Steering (EPS).
Sir , inside the rack any normal lithium grease will work just fine
@@yourDIYneeds Thank you for your help my friend.
Sir grease konsi use kare jo special es kaam ke liye hi use hoti ho vo bato...jo grease cold season mei hard na ho ?
Sir Normal grease ache se kaam karegi
@@yourDIYneedsor sir stering ke u joint ko liquid grease spray se lubrication kar sakte hai ya power stering oil ko injection ki help se lubricarion kare ? Dono mei se kon sa thik rahega n
Sir steering joint serviceable part nahi hai , agar aap use grease karte bhi hai to bhi wo grease upar hi rahega
Can we use red rubber grease here ?
Sir rubber grease may not be ideal for gear tooth
@@yourDIYneeds which type of grease than
Go for lithium grease or atleast petroleum grease
hey I have an Ford Fiesta and noticed that Hydrolic oil is leaking through there. what do I do
Sir that means your steering rack is leaking
We have two options , either go for a new one or get the seals replaced inside the rack , for both of these work , rack will come out
ok thanks think ill get a new one cause comes with everything.
@FaithfulAbundance sir thats your choice
which will be cheaper?
@FaithfulAbundance repair
Thx u👌
Very good
problemsthank it is good video hel
Awesome video again. Any more videos coming for reducing the sound?
Yes sir , 1-2 more with results
@@yourDIYneeds thank you. Waiting eagerly 🙏
Soon sir
Nice one bro
Thanks 😊
Bhai meri safari dicor 2.2 vtt m stearing turn krne pr ajeeb si aabaj aa rai h jaise koi over load truck krta h plz help bhai
Sir power steering fluid ka level check kar lo ek bar
Bro meri swift 2014 diesel 1lakh 10 thousand done.ab tak 1 baar bhi engine flush nhe hua hai. Kya mai ab engine flush kara sakta. hu koi prob to nhe hogi?
Nahi sir , agar sab kuch sahi hai , car sahi chal rahi hai , to aap ek bar aap flush kar sakte hai but 10 min se jada mat kariyega
@@yourDIYneeds thanks bro
Non servo?
भाई मेरी vento के मेन centre वाले ac vents में हवा नहीं आ रही है , एयर फ़िल्टर भी नया है, blower मोटर भी मैंने साफ़ कर दी. भाई क्या प्रॉब्लम हो सकती है और कैसे दूर करें इस समस्या को. साइड वाले vents बिलकुल मस्त हवा दे रहे हैं
Sir , vent closed to nahi hai ?
@@yourDIYneeds नहीं भाई vents ओपन हैं. मैंने music system, climate control panel ko nikal kar bhi dekh liya LEKIN KUZ SMJ NAHI AYA JI.....EVEN VENTS NIKAL KE BHI AIR NAHI AA RAHI MENE WASH KARNE KE LIYE NIKAL LIYE THE BHAI
@@yourDIYneeds और एक और प्रॉब्लम भी है जी गाडी में climate control ac लगा हुआ है उसके बटन दबाने से पैरों पर हवा भी नहीं जाती .. सिर्फ सामने ही आती है . जी
@@yourDIYneeds भाई आप ही मदद कर सकते हो लोकल इंजिनियर को समस्या समझ नहीं आई भाई
Sir air circulation motor ya fir uski wiring dono me se ek chej ki dikkat hai
Bro meri car ka steering fass gya h jisme steering lga rhta h , steering khichne pr bhi nhii nikl rha h ,Kya kru jisse nikl jae Orr tute bhi na
Sir bearing puller use kar lijiye , nikal jaega bhar
Hi mate. Could you tell me please what kind of grease did you use in this video? Thanks
Sir best is to use a high temp. Grease
But at the point when i was shooting the video , i did not had a high temp. Grease so i used a normal petrol based lithium grease
@@yourDIYneeds Thanks. BTW good instructional video 👍
🔥🔥🔥🔥🔥
My steering is fine but when I turn the car, the steering does not come back to its place
What to do?
Preload is tighter that what it needs to be
You can watch the video of preload adjustment on my channel
Alignment check... Caster is what determines in great part how well the steering returns to center... Camber as well greatly affects steering return.. worth checking... strut bearings also
Sir only if the castor is adjustable , but in this scenario its not , its fixed by manufacturer .
Nice bracelet lol
The car steering should come back to its place but it has to be brought back. The power that the steering should have is not there.
Then firstly get the alignment check ( alignment consist of toe angles , camber angles and castor angles ) if they are not set correctly , then steering will not behave as it should , it will also feel numb while driving
@@yourDIYneeds
Alighnment is ok
@@yourDIYneeds Someone has a permanent solution to this with a new apology
Was the car involved in a crash ?
Mera to kharab he ho gaya hai...I need to replace the rack
What happened sir ?
Yaar track gear cut gaye hai shockers kharab hone ki wajah se
Sir yehi hota hai , agar ek chej khrab hone lage or hum dhyan na de , to uski wageh se doosri chej khrab hone lagti hai
💩🚗
I would suggest clean the old grease completely first before adding the new grease as 2 different greases are not supposed to be mixed unless you got the same grease as the manufacturer put in before you.
Yes sir , ideally that's the best way to do it , but the older grease had the same appearance as dried up normal petroleum grease usually have , that was the reason why i added on top of it
@yourDIYneeds bro, in my case i changed the rack as the steering felt heavy and doest auto center after turning. But after rack replacement the steering feels better but definitely not comfortable to drive in city with single hand. I still fell heavy if i had to completely turn left or right. Any suggestions please? I also changed front struts mount bushes and greased them.