Vehicle Accidental & Fire Alert System with GPS Location using GSM, GPS, Fire & Accelerometer Sensor
HTML-код
- Опубликовано: 10 сен 2024
- In this video tutorial, you will learn how to make Vehicle Accidental Alert System using GSM & GPS with Google Map Tracing. You can download the Programming code and circuit diagram from the link written below.
Key Moments of this Video:
0:38 List of the components
1:08 Arduino Programming code for GSM * GPS based Accident alert system
2:00 Explanation of Programming code
6:34 Link for- How to calibrate GSP using Arduino IDE
10:15 Circuit Diagram for Accident Alert system
10:30 Live Hardware interfacing of GPS & GSM based Accident Alert System
14:08 Circuit Diagram for Accident Alert system with Piezo sensor
14:44 Live Testing of Accident alert system Project
Required components required:
• Arduino Uno/ Customized Atmega328 board
• Accelerometer ADXL335/345
• GPS Neo
• SIM800L GSM Module
• Fire Sensor
• 5V Buzzer
• Piezo Pressure sensor
• Breadboard
• Few jumper wires
Important Links:
Vehicle accidental Alert system using GSM & GPS code: github.com/its...
Circuit Diagram: github.com/its...
How to calibrate GPS: • How to decode GPS data...
How to calibrate Accelerometer • Calibrate the Orientat...
How to install NodeMCU board in Arduino IDE: www.nuttyengin...
How to install ESP32 board in Arduino IDE: www.nuttyengin...
Link to download Winzip: www.winzip.com...
Link to download WinRAR: www.win-rar.co...
Arduino IDE Software: www.arduino.cc...
ATmel AVR Studio: www.microchip....
NuttyFi Wifi Development board: www.nuttyengin...
Contact link for Nutty Engineer Company: www.nuttyengin...
Contact link for SME: www.smedehradu...
Our Other Video on NodeMCU ESP8266 & ESP32 boards:
Stay tuned with our channel for more videos at / smedehradun
BMP180 Sensor interfacing with Blynk2.0 & OLED with Code: • BMP180 Sensor Interfac...
How to measure the TDS Value of water with blynnk2.0- • TDS sensor based Safe ...
How to start with Arduino IoT cloud ESP32 & NodeMCU board DIY- • How to Start with Ardu...
How to start with Blynk 2.0- with Web & Mobile Dashboard- LED control: • How to Start with New ...
Home Automation with manual control: • Home Automation using ...
DHT11 sensor interfacing with blynk2.0: • DHT11 Sensor Data to N...
TDS sensor based Safe Water Quality Meter with Blynk2.0: • TDS sensor based Safe ...
Smart Dustbin with Blynk2.0 - ESP32 & NodeMCU: • Smart Dustbin with New...
Live Testing of Long Range LoRa SX1278 with Arduino Customized Atmega328 with working code DIY: • LoRa Module Testing wi...
For any query, you can comment on comment box below.
Join us at Social Platform:
Twitter: / itsbhupendra
LinkedIn: / schematics-micro-elect...
Facebook: / schematicslab
Instagram: / itsbhupendrasingh
Blog: schematicslab....
Website: www.smedehradu...
hi sir, im using 2 ultrasonic sensor, sim900A and neo-8M, i only retrieve ultrasonic data, when it comes to gsm, it always failed to initialize, why is that?
Check your gsm separately with commands so that you can wnaure it’s working or not.
Sir can i use LM2596 step down converter for stepping down voltage for Sim800l gsm module with rating of 3.7 to 4.4 volt.
And also can i use vibration sensor instead of Adxl335
Yes you can. But remove the code for ADXL and add for vibration sensor.
Could you please tell which part of code need to change for 345 accelerometer and what changes need to be made
Read the code carefully, check what we need to change in the code and try it by yourself. If there is an issue, then let us know.
hi sir, im using 2 ultrasonic sensor, SIM900A and Neo-8M, why is that when my ultrasonic detect something the gsm and gps didn’t triggered, i already check all the connection.
You need to check the gam and GPS separately and trace the coordinates in serial monitor. Once gps start getting gps data correctly, the light indicator start indicator light in tue gps neo.
may i ask, why you didn’t use both rx and tx for gsm and gps?
Because In gps, we need only receiver to receive data and in gsm, we are only sending the sms.
hi sir, i already emailed you
Check Your gsm and gps independent first then try with code.
Sir,In GSM 2g or 3g simcards are not available in market.Is there any other way to connect GSM
Use banl or mtnl SIM card.
I could not find any port named "COM9" in arduino software's "tools" option, so I selected COM3. Aftar that I tried to run the program. But I got an error message like- "TinyGPS.h: No such file or directory".
What can I do now??
Hi Tanvir,
You need to find out which com port connects your bird to computer.
Below video can help you to find install the com port in your computer.
And you need to install tiny gps library for this program .
@@SMEDehradun Thank you. I have one more question. What if I use SIM900 module??
Hello please can we get a link to your exact library files as in where you got them from
Hi @Puppy J,
All the links are available in the video description.
Can u add LCD with that circuit
It’s easy. add the lcd code in the program
Hello guys,
Please change the mobile number in the programming code, as daily I got lots of the messages in my mobile for an accident alert 😂.
What changes I need to make in the code for using mpu6050 accelerometer?
Replace the code of Adxl with MPU6050. Also change the condition for alert.
What do you mean by change the condition for alert ?
While it sense miss-happening.
@@SMEDehradun
when calibrating the GPS with the Arduino I did not get the reults . It does not change after 5 minutes , as you explained in the video.
I need help to figure out what the problem is ?
Gps signal is depend on your location. Take it outside from your place and then try.
Sir...can you help me??
I just need code including LCD display so it's shows values and alerts.. please
Hi, it’s very simple. try to do it by yourself first. If have any trouble then contact me.
Did the project worked successfully
Intresting
Thanks 🙏
Stay tuned for more innovative videos
How can we use multiple phone numbers so that the accident alert message can be sent to more than one person?
You can rewrite all the message sending command for the other numbers with similar manner.
Did the project successfully worked
the light on my gps and gsm are not glowing
Then check the power and signal.
Sir please explain in detail for connecting adxl345 instead of 335 🙏
Both sensors are working same. Connect and calibrate it.
Actually sir I am very confused in connection because pins are shown different on both sensors
@@Ha.Bhai.goodmorning you are using using adxl335 analog sensor ?
Hii sit where are the libraries files please send me the link in comment box u r information is very useful for us and we are making this project please dont say that libraries link is provided in description please send me the link in comment box for mee 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Hi,
Watch the complete video & Link is available in the video description.
Bluetooth connection is required to send it to my phone??
No.
There is gsm Modem attached in this projects that will send the message to the mobile.
@@SMEDehradun thank you! :) Is it possible to send gps data to my phone using gsm modem only using Jetson nano without Arduino or any other sensors??
Yes. You can. You need to all the commands that’s shown in to the programming code through your board.
Hi sir, can I use sim900a instead of sim800L? Thank you
Yes you can.
After uploading the code, its not giving any text message. Instead, all AT functions were printed on the serial monitor. May I ask what should I do in this case?
@@jeffashleycatipay3639 similar problem. Was your problem solved?
@jeffashleycatipay3639 same problem it unable to send sms
Sir, where is piezo pressure code?
Check it in program
Hi sir, we can use SIM900 ?
Yes you can. But code is different
Which sim r u using sir
BSNL
Can we use Airtel 4g sim
You can check if it provides the 2G/3G signals
Sir Bangladeshi sim use kar jayga?
Yes. Just change the mobile number with country code.
Sir how can i get 2g sim card?
BSNL SIM card works in all networks.
what language is this code in?
C++
Shall we use 4g sim card??
We can use bank SIM card or Vodafone-idea SIM card.
Airtel not working
sir, What changes do I need to make in the code for using ADXL 345 accelerometer?
First need to calibrate the x, y and x axis data, after it map it as per your application
@@SMEDehradun sir please explain it in details 🙏
Already explained all in video. What else you want to know.
Problem statement:-
when an object enters into the geo fence, the buzzer and led will turn ON until object is in geo fence.
Please can u help with this
Code and hardware idea
Yes I can help. We need to modify the code for Geo fencing.
@@SMEDehradun please send ur email
Drop a mail at schematicslab@gmail.com
Dada i can't send messages through gsm please tell what should I do
First you need to check, whether your SIM card is on at gsm modem or not? You can call on the SIM card no that is inserted in the gsm modem.
We need to provide 4V to gsm modem for working.
Call is comming in my phone through GSM but message is not comming
The thore may be issue with code.
What code u are using i am also using same code, in the serial monitor it is showing that msg sent successfully but in that number i can't find any msg
Have you written you mobile in in the code in which you want to receive message?
Can i define another pins for the gsm and if yes how. nice video and nice toturial about how it works..
Yes you can define the software serial port for gsm as defined for gps in the code.
@@SMEDehradun Can you give me a tutorial how its done. i am fighting with a sketch where i want the sketch to respond on a sms "GEO" with the location but with the gps code part in the sketch it locks the rest of the sketch up. its a sketch controling relays som pir sensors and some volt sensors and the sketch runs ok without the gps code.
I will try to figure it out. You need to send me the brief about your project.
@@SMEDehradun do you have a email.
Drop a mail at schematicslab@gmail.com
hi , sir can we use SIM800A in this?
Yes why not.
@@SMEDehradun can i put 4g bsnl SIM?
For this, you need to use SIM7600 Module.
@@SMEDehradun and the code will be same?
No. Code will be different for GSM module
Respected sir,
Can I use MPU-6050 Module 3 Axis Gyroscope | Accelerometer Module | Tilt Sensor Module
In place of Adxl 334 module ?
Yes you can use. But you need to made some changes in code to read the MPU6050.
Thank you for replying sir.
Can you please tell/ mail me the modifications I need to do into the code ?
I think you need to search the in google, you will get the library & example code for that. Try that.
@@SMEDehradun okay sir
Welcome Ayush
At which voltage sim800l will work
In specification its written 3.7to 4.1 but in Arduino no such output is there
If you want to use a small size GSM 800L, then you need to provide 4V to 4.2V to it.
@@SMEDehradun i am using exactly the same you are using
👍
can you change code for 4g sim
Yes I can. For testing the code, you need to send 4G GSM modem to me. If yes then I will share the address to send courier.
@@SMEDehradun just update the code according to 4 g sim and send it to me if you don't mind
😂
@@SMEDehradun why bro what happen
@Jyothi Jyothi you can try it by yourself. Or if you want help from me then send the module to me.
sir can we add a SOS button to this project
Hi @Ravi,
Yes it can.
Sir pls share how to use adxl 345 instead of 335
You need to connect the ADXL345 in I2C pins. Calibration are the same. I will try to share.
Ok sir I ll be waiting for reply
I will try.